What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?()A. A hub router prevents routes from being advertised to the remote router.B. Only remote routers are configured as stubs.C. Stub routers a

题目
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?()

A. A hub router prevents routes from being advertised to the remote router.

B. Only remote routers are configured as stubs.

C. Stub routers are not queried for routes.

D. Spoke routers connected to hub routers answer the route queries for the stub router.

E. A stub router should have only EIGRP hub routers as neighbors.

F. EIGRP stub routing should be used on hub routers only.

相似考题

1.Refer to the exhibit. In a redundant hub - and - spoke deployment using EIGRP, what feature can be used to ensure that routers C through F are not used as transit routers for data traveling from router B to network 10.1.1.0? Select the best response.（）A. Use address summarization at routers C, D, E, and FB. Use the EIGRP Stub featu re on routers C, D, E, and FC. Use passive - interface on the spoke links in routers A and BD. Change the administrative distance in routers A and B for routes learned from routers C, D, E,and F

2.You have just configured a static default route on router TK1. What is the purpose of a default route?()A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.

3.Refer to the exhibit. Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with EIGRP, and the entire network is in autonomous system 1. However,router RTB a nd RTC are not receiving each other‘s routes. What is the solution?（）A.Check and change the access lists on router RTAB.Configure the auto summary command under router eigrp 1 on router RTAC.Configure subinterfaces on the spoke routers and assig n different IP address subnets for each subinterfaceD.Issue the no ip split horizon command on router RTAE.Issue the no ip split horizon eigrp 1 command on router RTAF.Configure a distribute list on router RTA that allows it to advertise all r outes to the spoke routers

4.Refer to the exhibit. You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes. Before you begin the actual implementation, which three pieces of information are more important to know than the others?（）A. the Committed Information Rate of all the Frame Relay PVCsB. the Cisco IOS version running on all the routersC. the router model number of all the spoke routersD. the number of HQ networks connected behind the headquarter routersE. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers

更多“What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?() ”相关问题

  • 第1题：

    What parameters must you specify when you enable EIGRP routing?()

    A. The broadcast address, and AS number

    B. The network number and AS number

    C. EIGRP routing, network number and passive interface

    D. EIGRP routing, network number, and AS


    参考答案：D

  • 第2题：

    What are three considerations when choosing the QoS model to deploy in a network？ （）

    • A、 the routing protocols being utilized in the network
    • B、 the applications utilizing the network
    • C、 the traffic destinations
    • D、 network addressing scheme
    • E、 cost of implementation
    • F、 the amount of the control needed of the resources

    正确答案:B,E,F

  • 第3题：

    r1 is the hub ， multipoint mode subinterface， r2 and r3 is spoke， when r2 down at the spoke， What will r1 react？how about r3？


    正确答案:R1 will set the PVC to r2 as inactive. R3 will not be affected.

  • 第4题：

    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。

    • A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.
    • B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.
    • D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.
    • F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

    正确答案:A,D,E

  • 第5题：

    Which two are advantages of static routing when compared to dynamic routing？（）

    • A、Security increases because only the network administrator may change the routing tables.
    • B、Configuration complexity decreases as network size increases.
    • C、Routing updates are automatically sent to neighbors.
    • D、Route summarization iscompued automatically by the router.
    • E、Routing traffic load is reduced when used in stub network links
    • F、An efficient algorithm is used to build routing tables，using automatic updates.
    • G、Routing tables adapt automatically to topology changes.

    正确答案:A,E

  • 第6题：

    Which two are advantages of static routing when compared to dynamic routing?（）

    • A、Security increases because only the network administrator may change the routing tables
    • B、Configuration complexity decreases as network size increases
    • C、Routing updates are automatically sent to neighbors
    • D、Route summarization is compued automatically by the router
    • E、Routing traffic load is reduced when used in stub network links
    • F、An efficient algorithm is used to build routing tables,using automatic updates
    • G、Routing tables adapt automatically to topology changes.

    正确答案:A,E

  • 第7题：

    Which two steps below should you perform on the hub router while configuring EIGRP routing over  DMVPN （mGRE tunnel）？ （）

    • A、Set the NHRP hold time to match the EIGRP hold time
    • B、Add the enable eigrp stub command
    • C、Add the disable eigrp as-member split-horizon command
    • D、Add the disable eigrp as-member next-hop-self command

    正确答案:C,D

  • 第8题：

    What is an appropriate use of a default route？（）

    • A、to provide routing to a local web server
    • B、to provide routing from an ISP to a stub network
    • C、to provide routing that will override the configured dynamic routing protocol
    • D、to provide routing to a destination that is not specified in the routing table and which is outside the local network

    正确答案:D

  • 第9题：

    单选题
    What parameters must you specify when you enable EIGRP routing?（）
    A

    The broadcast address, and AS number

    B

    The network number and AS number

    C

    EIGRP routing, network number and passive interface

    D

    EIGRP routing, network number, and AS


    正确答案： D
    解析： 暂无解析

  • 第10题：

    多选题
    Which two are advantages of static routing when compared to dynamic routing?（）
    A

    Security increases because only the network administrator may change the routing tables

    B

    Configuration complexity decreases as network size increases

    C

    Routing updates are automatically sent to neighbors

    D

    Route summarization is compued automatically by the router

    E

    Routing traffic load is reduced when used in stub network links

    F

    An efficient algorithm is used to build routing tables,using automatic updates

    G

    Routing tables adapt automatically to topology changes.


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    单选题
    What is an appropriate use of a default route？（）
    A

    to provide routing to a local web server

    B

    to provide routing from an ISP to a stub network

    C

    to provide routing that will override the configured dynamic routing protocol

    D

    to provide routing to a destination that is not specified in the routing table and which is outside the local network


    正确答案： A
    解析： 暂无解析

  • 第12题：

    多选题
    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。
    A

    If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

    B

    If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    C

    If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

    D

    If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    E

    If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

    F

    If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.


    正确答案： D,B
    解析： 暂无解析

  • 第13题：

    Which two are advantages of static routing when compared to dynamic routing?()

    A.Security increases because only the network administrator may change the routing tables

    B.Configuration complexity decreases as network size increases

    C.Routing updates are automatically sent to neighbors

    D.Route summarization is compued automatically by the router

    E.Routing traffic load is reduced when used in stub network links

    F.An efficient algorithm is used to build routing tables,using automatic updates

    G.Routing tables adapt automatically to topology changes.


    参考答案：A, E

  • 第14题：

    Your network consists of a large hub - and - spoke Frame Relay network with a CIR of 56 kb/s foreach spoke. Which statement about the selection of a dynamic protocol is true?（）

    • A、EIGRP would be appropriate if LMI type ANS I is NOT used.
    • B、EIGRP would be appropriate, because the Frame Relay spokes could be segmented into their own areas.
    • C、EIGRP would be appropriate, because by default, queries are not propagated across the slow speed Frame Relay links.
    • D、EIGRP would be appropriate, because you can manage how much bandwidth is consumed over the Frame Relay interface.

    正确答案:D

  • 第15题：

    What parameters must you specify when you enable EIGRP routing?（）

    • A、The broadcast address, and AS number
    • B、The network number and AS number
    • C、EIGRP routing, network number and passive interface
    • D、EIGRP routing, network number, and AS

    正确答案:D

  • 第16题：

    Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）

    • A、 EIGRP can summarize per interface.
    • B、 OSPF router databases remain independent.
    • C、 When they are configured with stubs， EIGRP regularly floods the topology.
    • D、 OSPF topology decisions are made independent of hierarchy or area.

    正确答案:A

  • 第17题：

    What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?（）

    • A、it avoids split-horizon issues with distance vector routing protocols.
    • B、IP addresses can be conserved if VLSM is not being used for subnetting.
    • C、A multipoint interface offers greater security compared to point-to-point subinterface configurations.
    • D、The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.

    正确答案:B

  • 第18题：

    What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）

    • A、A hub router prevents routes from being advertised to the remote router.
    • B、Only remote routers are configured as stubs.
    • C、Stub routers are not queried for routes.
    • D、Spoke routers connected to hub routers answer the route queries for the stub router.
    • E、A stub router should have only EIGRP hub routers as neighbors.
    • F、EIGRP stub routing should be used on hub routers only.

    正确答案:B,C,E

  • 第19题：

    Which two are advantages of static routing when compared to dynamic routing?（）

    • A、Security increases because only the network administrator may change the routing tables.
    • B、Configuration complexity decreases as network size increases.
    • C、Routing updates are automatically sent to neighbors.
    • D、Route summarization iscompued automatically by the router.
    • E、Routing traffic load is reduced when used in stub network links.
    • F、An efficient algorithm is used to build routing tables,using automatic updates.
    • G、Routing tables adapt automatically to topology changes.

    正确答案:A,E

  • 第20题：

    单选题
    Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）
    A

     EIGRP can summarize per interface.

    B

     OSPF router databases remain independent.

    C

     When they are configured with stubs， EIGRP regularly floods the topology.

    D

     OSPF topology decisions are made independent of hierarchy or area.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    You have just configured a static default route on router TK1. What is the purpose of a default route?（）
    A

    It is a route to be used when the routing protocol fails.

    B

    It is a route configured by an ISP that sends traffic into a corporate network.

    C

    It is a route used when a packet is destined for a remote network that is not listed in the routing table.

    D

    It is a route manually configured for a specific remote network for which a routing protocol is not configured.

    E

    It is used to send traffic to a stub network.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?（）
    A

    it avoids split-horizon issues with distance vector routing protocols.

    B

    IP addresses can be conserved if VLSM is not being used for subnetting.

    C

    A multipoint interface offers greater security compared to point-to-point subinterface configurations.

    D

    The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）
    A

    A hub router prevents routes from being advertised to the remote router.

    B

    Only remote routers are configured as stubs.

    C

    Stub routers are not queried for routes.

    D

    Spoke routers connected to hub routers answer the route queries for the stub router.

    E

    A stub router should have only EIGRP hub routers as neighbors.

    F

    EIGRP stub routing should be used on hub routers only.


    正确答案： D,E
    解析： 暂无解析

  • 第24题：

    多选题
    What are three considerations when choosing the QoS model to deploy in a network？（）
    A

    the routing protocols being utilized in the network

    B

    the applications utilizing the network

    C

    the traffic destinations

    D

    network addressing scheme

    E

    cost of implementation

    F

    the amount of the control needed of the resources


    正确答案： D,B
    解析： 暂无解析

相关内容