Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（）External data:Originating router is 10.1.1.1AS number of route is 1External protocol is O

题目

Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（）External data:Originating router is 10.1.1.1AS number of route is 1External protocol is OSPF, external metric is 64Administrator tag is 0 (0x00000000)

A. R1 is the router that redistributed the route

B. R1‘s metric to reach subnet 10.2.2.0/24 is 64

C. The route was redistributed on a router that has a router ospf 1 command configured

D. R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

相似考题

1.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

2.Refer to the exhibit. EIGRP had converged in AS 1 when the link between router R1 and R2 went down. The console on router R2 generated the following messages:*Mar 20 12:12:06: %DUAL - 5NBRCHANG E: IP - EIGRP 1: Neighbor 10.1.4.3 (Serial0) is down: stuck in active*Mar 20 12:15:23: %DUAL -3- SIA: Route 10.1.1.0/24 stuck - in - active state in IP - EIGRP 1.Cleaning up The network administrator issued the show ip eigrp topology active command on R2 to check the status of the EIGRP network.Which statement best describes the reason for the error messages?（）A. Incorrect bandwidth configuration on router R3 prevents R2 from establishing neighbor adjacency.B. Incorrect bandwidth configuration on router R 5 prevents R2 from establishing neighbor adjacency.C. Router R3 did not reply to the query about network 10.1.1.0/24 sent by router R2 .D. Router R5 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

3.Which command displays EIGRP－related router activities as they occur?()A. TestKing# show ip route *B. TestKing# debug eigrp routeC. TestKing# debug ip eigrpD. TestKing# debug ip protocols eigrpE. TestKing# show ip route eigrp

4.A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned

更多“Examine the following excerpt from the show ip eigrp topology 10.2.2.0／24 command on route ”相关问题

  • 第1题：

    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

    A. TestKing# show eigrp entries

    B. TestKing# show protocols

    C. TestKing# debug eigrp routes

    D. TestKing# show ip route eigrp

    E. TestKing# show route eigrp


    参考答案：D

  • 第2题：

    Which show command will display only the Type 5 LSAs in the OSPF topology database?()

    A. show ip ospf database external

    B. show ip ospf database nssa - external

    C. show ip route ospf

    D. show ip ospf datab ase summary

    E. show ip route


    参考答案：A

  • 第3题：

    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

    • A、TestKing# show eigrp entries
    • B、TestKing# show protocols
    • C、TestKing# debug eigrp routes
    • D、TestKing# show ip route eigrp
    • E、TestKing# show route eigrp

    正确答案:D

  • 第4题：

    EIGRP uses five generic packet types （hello， updates， queries， replies， acknowledgements）. If youwished to view the statistics for these packets， which IOS command should you use？（）

    • A、debug eigrp packets
    • B、show ip eigrp traffic
    • C、show ip eigrp topology
    • D、show ip eigrp neighbors

    正确答案:B

  • 第5题：

    Which command will display all the EIGRP feasible successor routes known to a router?（）

    • A、Router# show ip eigrp routes *
    • B、Router# show ip eigrp summary
    • C、Router# show ip eigrp topology
    • D、Router# show ip eigrp adjacencies
    • E、Router# show ip eigrp neighbors detail

    正确答案:C

  • 第6题：

    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）

    • A、By adding all subnets listed by the show ip route connected command
    • B、By adding the subnets of working interfaces over which static neighbors have been defined
    • C、By adding subnets redistributed on the local router from another routing source
    • D、By adding all subnets listed by the show ip route static command

    正确答案:B,C

  • 第7题：

    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）

    • A、show ip eigrp topology
    • B、show ip eigrp topology all - links
    • C、show ip route eigrp
    • D、show ip route eigrp all - links
    • E、show ip eigrp topology all - learned

    正确答案:B

  • 第8题：

    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）

    • A、R1 has been configured with an ip default- network 2.0.0.0 command.
    • B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
    • C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
    • D、Another router has been configured with an ip default - network 2.0.0.0 command.
    • E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    正确答案:D

  • 第9题：

    单选题
    Which show command will display only the Type 5 LSAs in the OSPF topology database？（）
    A

    show ip ospf database external

    B

    show ip ospf database nssa - external

    C

    show ip route ospf

    D

    show ip ospf datab ase summary

    E

    show ip route


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）
    A

    TestKing# show eigrp entries

    B

    TestKing# show protocols

    C

    TestKing# debug eigrp routes

    D

    TestKing# show ip route eigrp

    E

    TestKing# show route eigrp


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
    A

    show ip route

    B

    show ip eigrp topology

    C

    show ip ospf topology

    D

    show ip eigrp topology 10.1.1.0/24


    正确答案： D,C
    解析： 暂无解析

  • 第12题：

    单选题
    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）
    A

    The show ip eigrp neighbors command on R1 lists the revised Hello timer

    B

    The show ip eigrp interfaces command on R1 lists the revised Hello timer

    C

    The R1 - R2 neighborship fails due to Hello timer mismatcH

    D

    The show ip eigrp interfaces detail command on R1 lists the revised Hello timer


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Which command will display all the EIGRP feasible successor routes known to a router?()

    A. Router# show ip eigrp routes *

    B. Router# show ip eigrp summary

    C. Router# show ip eigrp topology

    D. Router# show ip eigrp adjacencies

    E. Router# show ip eigrp neighbors detail


    参考答案：C

  • 第14题：

    Based on the exhibited output, which three statements are true?()

    A. The route to 10.2.0.0/16 was redistributed into EIGRP.

    B. A default route has been redistributed into the EIGRP autonomous system.

    C. R1 is configured with the ip summary - address command.

    D. R1 is sourcing a n external EIGRP route from Null0.

    E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.

    F. R1 is configured with the variance command.


    参考答案：B, C, F

  • 第15题：

    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）

    • A、show ip route
    • B、show ip eigrp topology
    • C、show ip ospf topology
    • D、show ip eigrp topology 10.1.1.0/24

    正确答案:A,C

  • 第16题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第17题：

    Which of the following commands shows all routes learned via EIGRP？（Choose all that apply.）（）

    • A、show ip eigrp topology
    • B、show ip eigrp adjacency
    • C、show ip eigrp routes
    • D、show ip eigrp database
    • E、show ip route eigrp
    • F、show ip eigrp forwarding

    正确答案:A

  • 第18题：

    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）

    • A、The show ip eigrp neighbors command on R1 lists the revised Hello timer
    • B、The show ip eigrp interfaces command on R1 lists the revised Hello timer
    • C、The R1 - R2 neighborship fails due to Hello timer mismatcH
    • D、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer

    正确答案:D

  • 第19题：

    Which show command will display only the Type 5 LSAs in the OSPF topology database？（）

    • A、show ip ospf database external
    • B、show ip ospf database nssa - external
    • C、show ip route ospf
    • D、show ip ospf datab ase summary
    • E、show ip route

    正确答案:A

  • 第20题：

    Which command displays EIGRP-related router activities as they occur?（）

    • A、TestKing# show ip route *
    • B、TestKing# debug eigrp route
    • C、TestKing# debug ip eigrp
    • D、TestKing# debug ip protocols eigrp
    • E、TestKing# show ip route eigrp

    正确答案:C

  • 第21题：

    单选题
    Which command displays EIGRP-related router activities as they occur?（）
    A

    TestKing# show ip route *

    B

    TestKing# debug eigrp route

    C

    TestKing# debug ip eigrp

    D

    TestKing# debug ip protocols eigrp

    E

    TestKing# show ip route eigrp


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    Which command will display all the EIGRP feasible successor routes known to a router?（）
    A

    Router# show ip eigrp routes *

    B

    Router# show ip eigrp summary

    C

    Router# show ip eigrp topology

    D

    Router# show ip eigrp adjacencies

    E

    Router# show ip eigrp neighbors detail


    正确答案： E
    解析： 暂无解析

  • 第23题：

    多选题
    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）
    A

    By adding all subnets listed by the show ip route connected command

    B

    By adding the subnets of working interfaces over which static neighbors have been defined

    C

    By adding subnets redistributed on the local router from another routing source

    D

    By adding all subnets listed by the show ip route static command


    正确答案： B,C
    解析： 暂无解析

  • 第24题：

    单选题
    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
    A

    show ip eigrp topology

    B

    show ip eigrp topology all - links

    C

    show ip route eigrp

    D

    show ip route eigrp all - links

    E

    show ip eigrp topology all - learned


    正确答案： B
    解析： 暂无解析

相关内容