What is the meaning of the default value of the EIGRP variance command of 1? ()A. Only the path that is the feasible successor should be used.B. Load balancing is disabled on t his router.C. The router only performs equal - cost load balancing on all path

题目
What is the meaning of the default value of the EIGRP variance command of 1? ()

A. Only the path that is the feasible successor should be used.

B. Load balancing is disabled on t his router.

C. The router only performs equal - cost load balancing on all paths that have a metric greater than 1

D. The router performs equal - cost load balancing.

相似考题

1.What is the default value of the IS－IS lsp－refresh－interval command?()A. 60 secondsB. 5 minutesC. 15 minutesD. 30 minutes

2.Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table?Note that RD refers to reported distance and FD to feasible distanc E.（）A. Adds all routes for which the metric is <= 200 * the best metric among all routesB. Adds all routes because of the ridiculously high variance settingC. Adds all successor and feasible successor routesD. Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

3.During the redistribution process configured on RTA, some of the EIGRP routes, such as 10.1.1.0/24 and 10.2.2.0/24,are not being redistributed into the OSPF routing domain. Which two items could be a solution to this proble m?（）A. Change the EIGRP AS number from 100 to1 in the redistribute command.B. Add the subnets option to the redistribute command.C. Change the metric - type to2 in the redistribute command.D. Configure the redistribute command under router eigrp 1 i nstead.E. Change the metric to an EIGRP compatible metric value (bandwidth, delay, reliability, load, MTUs) in the redistribute command.

4.Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

参考答案和解析
参考答案：D
更多“What is the meaning of the default value of the EIGRP variance command of 1? () ”相关问题

  • 第1题：

    Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）

    A. The no auto - summary command needs to be added under router eigrp 1

    B. The subnets keyword was not included in the redistribute command under router ospf 1

    C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

    D. The default - information originate command needs to be added under router ospf 1

    E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF


    参考答案：B

  • 第2题：

    Refer to the exhibit. A company would prefer all Internet - bound OSPF routed traffic to use ISP ABC with ISP DEF as a backup. As the network consultant, what three configuration changes might you make?（）

    A. The default -information originate command should be configured on router B1 and B4.

    B. The default -information originate command should be configured on router B2 and B3.

    C. If the metric value for ISP ABC is set at the default, the I SP DEF metric value should be set to 1.

    D. If the metric value for ISP ABC is set at the default, the ISP DEF metric value should be set to 25.

    E. The metric type value should be set to type 1.

    F. The metric type value should be set to type 2.


    参考答案：B, D, F

  • 第3题：

    Refer to the exhibit.The actual speed of the serial links between R2 and R3 are 256 kb/s and 512k b/s respectively. When configuring EIGRP on routers R2 and R3, the network administrator configured the bandwidth of both serial interfaces to 512 kb/s. What will be the effect?（）

    A. EIGRP will overutilize the 512 kb/s link.

    B. The interface "delay" value used in the EIGRP metric calculation will be inaccurate on the 256k b/s serial interface.

    C. The amount of bandwidth used for EIGRP routing protocol traffic on the 256 kb/s link can become excessive.

    D. EIGRP can load balance between the two serial links only if the variance is set to 2 or higher.

    E. Unequal cost load balancing will be disabled.


    参考答案：C

  • 第4题：

    Based on the exhibited output, which three statements are true?()

    A. The route to 10.2.0.0/16 was redistributed into EIGRP.

    B. A default route has been redistributed into the EIGRP autonomous system.

    C. R1 is configured with the ip summary - address command.

    D. R1 is sourcing a n external EIGRP route from Null0.

    E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.

    F. R1 is configured with the variance command.


    参考答案：B, C, F

  • 第5题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第6题：

    Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?（）

    • A、Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.
    • B、Redistribute the statically configured defa ult route.
    • C、Disable auto - summary.
    • D、Configure the network 0.0.0.0 command.
    • E、Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.

    正确答案:C,E

  • 第7题：

    What is the same meaning of location value? （）

    • A、Different value
    • B、Different value of same goods at the different place
    • C、Different goods
    • D、Different value of different goods at the same place

    正确答案:B

  • 第8题：

    Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1's decision of what r outes to add to the IP routing table? Note that RD refers to reported distance and FD to feasible distanc E.（）

    • A、Adds all routes for which the metric is <= 200 * the best metric among all routes
    • B、Adds all routes because of the ridiculously high variance setting
    • C、Adds all successor and feasible successor routes
    • D、Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

    正确答案:D

  • 第9题：

    Which three statements are true about EIGRP route summarization?（）

    • A、When manual summarization is configured, the router immediately creates a route that points to null0 interface
    • B、Manual route summarization  is configured in router configuration mode when the router is configured for EIGRP routing
    • C、Manual route summarization is configured on the interface
    • D、The ip summary - address eigrp command generates a default route with an administrative distance  of 5
    • E、When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routes
    • F、The ip summary - address eigrp command generates a default route with an administrative distance of 90

    正确答案:A,C,D

  • 第10题：

    What is the default value of the IS-IS lsp-refresh-interval command?（）

    • A、60 seconds
    • B、5 minutes
    • C、15 minutes
    • D、30 minutes

    正确答案:C

  • 第11题：

    单选题
    A router has been configured with an EIGRP variance of 3. Which of the following statements istrue？（）
    A

    An error will result because a router cannot be configured with an EIGRP variance of 3 becausethe maximum variance number is 2

    B

    The successor route will end up in the routing table， and so will any route with a metric at mostthree times greater than the value of the successor’s metric

    C

    EIGRP will only advertise routes that are within three hops of the current router

    D

    The successor route will end up in the routing table， and so will any route with a metric at leastone third the value of the successor’s metric

    E

    The best three routes with equal cost paths will end up in the routing table

    F

    The successor route will be any route with three times the value of the advertised distance


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    What is the meaning of the default value of the EIGRP variance command of 1? （）
    A

    Only the path that is the feasible successor should be used.

    B

    Load balancing is disabled on t his router.

    C

    The router only performs equal - cost load balancing on all paths that have a metric greater than 1

    D

    The router performs equal - cost load balancing.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()

    A. traffic - share balanced

    B. distance

    C. maximum- paths

    D. default - network

    E. variance


    参考答案：C, E

  • 第14题：

    Refer to the exhibit. ROUTE.com has just implemented this EIGRP network. A network administrator came to you for advice while trying to implement load balancing across part of their EIGRP network. If the variance value is configured as 2 on all routers and all o ther metric and K values are configured to their default values, traffic from the Internet to the data center will be load balanced across how many paths? （）

    A. 1

    B. 2

    C. 3

    D. 4

    E. 5


    参考答案：C

  • 第15题：

    Which three statements are true about EIGRP route summarization?()

    A.When manual summarization is configured, the router immediately creates a route that points to null0 interface

    B.Manual route summarization is configured in router configuration mode when the router is configured for EIGRP routing

    C.Manual route summarization is configured on the interface

    D.The ip summary - address eigrp command generates a default route with an administrative distance of 5

    E.When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routes

    F.The ip summary - address eigrp command generates a default route with an administrative distance of 90


    参考答案：A, C, D

  • 第16题：

    Which two design recommendations are most appropriate when EIGRP is the data center core routing protocol?()

    A. Summarize data center subnets.

    B. Use passive interfaces to ensure appropriate adjacencies.

    C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.

    D. Adjust the default bandwidth value to ensure proper bandwidth on all links.

    E. Advertise a default summary route into the data center core from the aggregation layer.


    参考答案：A, E

  • 第17题：

    During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）

    • A、incorrect distribute lists have been configured
    • B、missing ip classless command
    • C、CEF not enabled
    • D、no default metric configured for EIGRP

    正确答案:A,D

  • 第18题：

    What is the meaning of the default value of the EIGRP variance command of 1? （）

    • A、Only the path that is the feasible successor should be used.
    • B、Load balancing is disabled on t his router.
    • C、The router only performs equal - cost load balancing on all paths that have a metric greater than 1
    • D、The router performs equal - cost load balancing.

    正确答案:D

  • 第19题：

    Which two design recommendations are most appropriate when EIGRP is the data center corerouting protocol？ （）

    • A、 Summarize data center subnets.
    • B、 Use passive interfaces to ensure appropriate adjacencies.
    • C、 Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
    • D、 Adjust the default bandwidth value to ensure proper bandwidth on all links.
    • E、 Advertise a default summary route into the data center core from the aggregation layer.

    正确答案:A,E

  • 第20题：

    A router has been configured with an EIGRP variance of 3. Which of the following statements istrue？（）

    • A、An error will result because a router cannot be configured with an EIGRP variance of 3 becausethe maximum variance number is 2
    • B、The successor route will end up in the routing table， and so will any route with a metric at mostthree times greater than the value of the successor’s metric
    • C、EIGRP will only advertise routes that are within three hops of the current router
    • D、The successor route will end up in the routing table， and so will any route with a metric at leastone third the value of the successor’s metric
    • E、The best three routes with equal cost paths will end up in the routing table
    • F、The successor route will be any route with three times the value of the advertised distance

    正确答案:B

  • 第21题：

    By default, what does a Juniper Networks router set the BGP origin code to when originating theroute?（）

    • A、IGP (Value 0)
    • B、EGP (Value 1)
    • C、Incomplete (Value 2)
    • D、It depends on the route's source.

    正确答案:A

  • 第22题：

    单选题
    You add the following commands into a routed topology： router eigrp 1 variance 3 traffic-share min across-interfaces. Users now complain about voice quality in your VoIP system. What should be done？ （）
    A

     Add the command： router eigrp 1 traffic-share voice interface fast 0/0

    B

     Reconfigure EIGRP to recognize voice packets

    C

     Remove the variance from the configuration

    D

     Reconfigure the VoIP system to use RTP sequence number headers

    E

     Use an H '323 gatekeeper for your VoIP system to negotiate an H'245 uneven packet buffer

    F

     Reconfigure EIGRP to version 2


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    What is the default value of the IS-IS lsp-refresh-interval command?（）
    A

    60 seconds

    B

    5 minutes

    C

    15 minutes

    D

    30 minutes


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    By default, what does a Juniper Networks router set the BGP origin code to when originating theroute?（）
    A

    IGP (Value 0)

    B

    EGP (Value 1)

    C

    Incomplete (Value 2)

    D

    It depends on the route's source.


    正确答案： A
    解析： 暂无解析

相关内容