What address should be configured as the default－gateway for the host connected to interface Fa0／4 of Sw－AC3?()A.192.168.1.254B.192.168.22.254C.192.168.33.254D.192.168.44.254

题目
What address should be configured as the default－gateway for the host connected to interface Fa0／4 of Sw－AC3?()

A.192.168.1.254

B.192.168.22.254

C.192.168.33.254

D.192.168.44.254

相似考题

1.A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back.What is causing the problem?（）A. The host needs to open the telnet port.B. The host needs a route for the translated address.C. The administrator must use a proxy-arp policy for the translated address.D. The administrator must use a security policy, which will allow communication between the zones.

2.An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF?()A. Ensure that an interface has been configured with an IP addressB. Ensure that IP classless is enabledC. Ensure that the interfaces can ping their directly connected neighborsD. Ensure that an interface has been configured with an IP address and is up

3.Refer to the graphic.Host A is communicating with the seiver. What will be the source MAC address of the frames received by Host A from the server?()A.the MAC address of the seiver network interfaceB.the MAC address of host AC.the MAC address of router interface e 1D.the MAC address of router interface e0

4.Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem?（）A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0B.A second DHCP pool for network 10 .10.0.0/24 should be configuredC.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issuedD.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfigurationE.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration

参考答案和解析
参考答案：B
更多“What address should be configured as the default－gateway for the host connected to interface Fa0／4 of Sw－AC3?() ”相关问题

  • 第1题：

    The OSPF process has been started and the networks have been configured for Area 0 as shown in the diagram. The network administrator has several options for configuring RouterB to ensure that it will be preferred as the designated router (DR) for the 172.16.1.0 /24 LAN segment. What configuration tasks could be used to establish this preference (Choose three.)（）。

    A.Configure the priority value of the Fa0/0 interface of RouterB to a higher value than any other interface on the Ethernet network.

    B.Change the router id of Router B by assigning the IP address 172.16.1.130/24 to the Fa0/0 interface of RouterB.

    C.Configure a loopback interface on RouterB with an IP address higher than any IP address on the other routers.

    D.Change the priority value of the Fa0/0 interface of RouterB to zero.

    E.Change the priority values of the Fa0/0 interfaces of RouterA and RouterC to zero.

    F.No further configuration is necessary.


    参考答案：A, C, E

  • 第2题：

    What is the first thing that happens when IPv6 is enabled on an interface on a host？（）

    • A、A router solicitation is sent on that interface.
    • B、There is a duplicate address detection on the host interface.
    • C、The link local address is assigned on the host interface.
    • D、A neighbor redirect message is sent on the host interface.

    正确答案:B

  • 第3题：

    Refer to the exhibit.HostA cannot ping HostB.Assuming routing is properly configured,what could be the cause of this problem?（）

    • A、HostA is not on the same subnet as its default gateway
    • B、The address of SwitchA is a subnet address
    • C、The Fa0/0 interface on RouterA is on a subnet that cannot be used
    • D、The serial interfaces of the routers are not on the same subnet
    • E、The Fa0/0 interface on RouterB is using a broadcast address

    正确答案:D

  • 第4题：

    A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）

    • A、The default gateway is configured on a different subnet form this host.
    • B、The host is a member of the fifth usable subnet of the 192.168.16.0 network.
    • C、The subnetwork address for this host is 192.168.16.160/28.
    • D、The address of the next higher subnet is 192.168.16.192.
    • E、The address of the router interface that is attached to this subnetwork is 192.168.16.190.
    • F、There are 60 usable host addresses on this subnet.

    正确答案:B,D,E

  • 第5题：

    Refer to the exhibit.What is the reason that the interface status is “administratively down,line protocol down”?（）

    • A、There is a mismatch in encapsulation types
    • B、The wrong type of cable is connected to the interface
    • C、The interface has been configured with the shutdown command
    • D、The interface is not receiving any keepalives
    • E、The interface needs to be configured as a DTE device
    • F、There is no encapsulation type configured

    正确答案:C

  • 第6题：

    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4 

    • A、 NPV is not enabled on the core switch？
    • B、 The interface connected to the Core switch is in admin down state
    • C、 The local host interface belongs to the wrong VSAN？
    • D、 The local host interface is not able to login

    正确答案:B

  • 第7题：

    单选题
    An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF？（）
    A

    Ensure that an interface has been configured with an IP address

    B

    Ensure that IP classless is enabled

    C

    Ensure that the interfaces can ping their directly connected neighbors

    D

    Ensure that an interface has been configured with an IP address and is up


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    Host 1 sends a request for a file to remote sever1. Which destination address does Host 1 place f the packet containing the request（）。
    A

    The Mac address of the NIC in Sever1

    B

    The IP address of Server 1.

    C

    The MAC address of the s0/0/0 interface of router R2

    D

    The IP address of the s0/0/0 interface of router R1

    E

    The IP address of the Fa0/0 interface of router R1


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4
    A

     NPV is not enabled on the core switch？

    B

     The interface connected to the Core switch is in admin down state

    C

     The local host interface belongs to the wrong VSAN？

    D

     The local host interface is not able to login


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Refer to the exhibit.What is the reason that the interface status is “administratively down,line protocol down”?（）
    A

    There is a mismatch in encapsulation types

    B

    The wrong type of cable is connected to the interface

    C

    The interface has been configured with the shutdown command

    D

    The interface is not receiving any keepalives

    E

    The interface needs to be configured as a DTE device

    F

    There is no encapsulation type configured


    正确答案： C
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements about the configuration of the switch interface are correct (Choose two)（）。
    A

    The switchport belongs only to VLAN 2

    B

    Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2

    C

    The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2

    D

    A network host can be connected to this interface


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit.HostA cannot ping HostB.Assuming routing is properly configured,what could be the cause of this problem?（）
    A

    HostA is not on the same subnet as its default gateway

    B

    The address of SwitchA is a subnet address

    C

    The Fa0/0 interface on RouterA is on a subnet that cannot be used

    D

    The serial interfaces of the routers are not on the same subnet

    E

    The Fa0/0 interface on RouterB is using a broadcast address


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Host 1 sends a request for a file to remote sever1. Which destination address does Host 1 place f the packet containing the request（）。

    • A、The Mac address of the NIC in Sever1
    • B、The IP address of Server 1.
    • C、The MAC address of the s0/0/0 interface of router R2
    • D、The IP address of the s0/0/0 interface of router R1
    • E、The IP address of the Fa0/0 interface of router R1

    正确答案:B

  • 第14题：

    Host 1 receives a file from remote server 1. Which MAC address appears as the source address in the header of the frames received by Host 1（）。

    • A、The MAC address of the NIC in Host 1
    • B、The MAC address of the NIC in server 1
    • C、The MAC address of the Fa0/0 interface of router R1
    • D、The MAC address of the s0/0/0 interface of the router R2

    正确答案:C

  • 第15题：

    Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。

    • A、a switch with a trunk link that is configured between the switches
    • B、a router with an IP address on the physical interface that is connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a router with subinterfaces configured on the physical interface that is connected to the switch

    正确答案:D

  • 第16题：

    You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）

    • A、UplinkFast on the switch port connected to the server
    • B、BackboneFast on the switch port connected to the server
    • C、PortFast on the switch port connected to the workstation
    • D、trunking on the switch

    正确答案:C

  • 第17题：

    Which two statements about the configuration of the switch interface are correct (Choose two)（）。

    • A、The switchport belongs only to VLAN 2
    • B、Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2
    • C、The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2
    • D、A network host can be connected to this interface

    正确答案:A,D

  • 第18题：

    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）

    • A、a router with subinterfaces configured on the physical interface that is connected to the switch
    • B、a router with an IP address on the physical interface connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a switch with a trunk link that is configured between the switches

    正确答案:A

  • 第19题：

    单选题
    What is the first thing that happens when IPv6 is enabled on an interface on a host？（）
    A

    A router solicitation is sent on that interface.

    B

    There is a duplicate address detection on the host interface.

    C

    The link local address is assigned on the host interface.

    D

    A neighbor redirect message is sent on the host interface.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。
    A

    a switch with a trunk link that is configured between the switches

    B

    a router with an IP address on the physical interface that is connected to the switch

    C

    a switch with an access link that is configured between the switches

    D

    a router with subinterfaces configured on the physical interface that is connected to the switch


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Host 1 receives a file from remote server 1. Which MAC address appears as the source address in the header of the frames received by Host 1（）。
    A

    The MAC address of the NIC in Host 1

    B

    The MAC address of the NIC in server 1

    C

    The MAC address of the Fa0/0 interface of router R1

    D

    The MAC address of the s0/0/0 interface of the router R2


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）
    A

    a router with subinterfaces configured on the physical interface that is connected to the switch

    B

    a router with an IP address on the physical interface connected to the switch

    C

    a switch with an access link that is configured between the switches

    D

    a switch with a trunk link that is configured between the switches


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
    A

    The default gateway is configured on a different subnet form this host.

    B

    The host is a member of the fifth usable subnet of the 192.168.16.0 network.

    C

    The subnetwork address for this host is 192.168.16.160/28.

    D

    The address of the next higher subnet is 192.168.16.192.

    E

    The address of the router interface that is attached to this subnetwork is 192.168.16.190.

    F

    There are 60 usable host addresses on this subnet.


    正确答案： B,C
    解析： 暂无解析

相关内容