After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What can you conclude about this network? ()A. The network has been stable for at least the last 45 minutesB. There is a flapp

题目
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What can you conclude about this network? ()

A. The network has been stable for at least the last 45 minutes

B. There is a flapping link or interf ace, and router C knows an alternate path to the network

C. There is a flapping link or interface, and router A does not know an alternate path to the network

D. EIGRP is not working correctly on router C

E. There is not enough information to make a determination

相似考题

1.A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned

2.After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What information can you determine about this network?()A. The network is stableB. There is a flapping link or interface, and router C knows an alternate path to the networkC. There is a flapping link or interf ace, and router C does not know an alternate path to the networkD. EIGRP is not working correctly on router CE. There is not enough information to make a determination

3.While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）A. pingB. traceC. show ip routeD. show interfaceE. show cdp neighbors

4.According to the following output, can you tell me which command can redistribute IGRP into EIGRP?()A. Under t he router eigrp mode add redistribute igrp 123 subnetsB. Under the router igrp mode add redistribute eigrp 123C. None, EIGRP and IGRP are automatically redistributed in this instance.D. Under the router eigrp mode add redistribute igrp 123

参考答案和解析
参考答案：A
更多“After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What can you conclude about this network? () ”相关问题

  • 第1题：

    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

    A. TestKing# show eigrp entries

    B. TestKing# show protocols

    C. TestKing# debug eigrp routes

    D. TestKing# show ip route eigrp

    E. TestKing# show route eigrp


    参考答案：D

  • 第2题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第3题：

    What parameters must you specify when you enable EIGRP routing?()

    A. The broadcast address, and AS number

    B. The network number and AS number

    C. EIGRP routing, network number and passive interface

    D. EIGRP routing, network number, and AS


    参考答案：D

  • 第4题：

    The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?()

    A.network 172.26.168.0 area 478

    B.network 172.26.0.0

    C.network 172.26.168.128 0.0.0.127

    D.network 172.26.168.128 area 478


    参考答案：B

  • 第5题：

    EIGRP uses five generic packet types （hello， updates， queries， replies， acknowledgements）. If youwished to view the statistics for these packets， which IOS command should you use？（）

    • A、debug eigrp packets
    • B、show ip eigrp traffic
    • C、show ip eigrp topology
    • D、show ip eigrp neighbors

    正确答案:B

  • 第6题：

    The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?（）

    • A、network 172.26.168.0 area 478
    • B、network 172.26.0.0
    • C、network 172.26.168.128 0.0.0.127
    • D、network 172.26.168.128 area 478

    正确答案:B

  • 第7题：

    A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）

    • A、Router# show ip eigrp adjacency
    • B、Router# show ip eigrp topology
    • C、Router# show ip eigrp interfaces
    • D、Router# show ip eigrp neighbors

    正确答案:D

  • 第8题：

    When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful.What is the next thing that should be checked?（）

    • A、Verify that the EIGRP hello and hold timers match exactly.
    • B、Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command.
    • C、Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command.
    • D、Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.

    正确答案:D

  • 第9题：

    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）

    • A、R1 has been configured with an ip default- network 2.0.0.0 command.
    • B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
    • C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
    • D、Another router has been configured with an ip default - network 2.0.0.0 command.
    • E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    正确答案:D

  • 第10题：

    单选题
    You add the following commands into a routed topology： router eigrp 1 variance 3 traffic-share min across-interfaces. Users now complain about voice quality in your VoIP system. What should be done？ （）
    A

     Add the command： router eigrp 1 traffic-share voice interface fast 0/0

    B

     Reconfigure EIGRP to recognize voice packets

    C

     Remove the variance from the configuration

    D

     Reconfigure the VoIP system to use RTP sequence number headers

    E

     Use an H '323 gatekeeper for your VoIP system to negotiate an H'245 uneven packet buffer

    F

     Reconfigure EIGRP to version 2


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）
    A

    Router# show ip eigrp adjacency

    B

    Router# show ip eigrp topology

    C

    Router# show ip eigrp interfaces

    D

    Router# show ip eigrp neighbors


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
    A

    show ip eigrp topology

    B

    show ip eigrp topology all - links

    C

    show ip route eigrp

    D

    show ip route eigrp all - links

    E

    show ip eigrp topology all - learned


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which command will display all the EIGRP feasible successor routes known to a router?()

    A. Router# show ip eigrp routes *

    B. Router# show ip eigrp summary

    C. Router# show ip eigrp topology

    D. Router# show ip eigrp adjacencies

    E. Router# show ip eigrp neighbors detail


    参考答案：C

  • 第14题：

    Refer to the exhibit. Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with EIGRP, and the entire network is in autonomous system 1. However,router RTB a nd RTC are not receiving each other‘s routes. What is the solution?（）

    A.Check and change the access lists on router RTA

    B.Configure the auto summary command under router eigrp 1 on router RTA

    C.Configure subinterfaces on the spoke routers and assig n different IP address subnets for each subinterface

    D.Issue the no ip split horizon command on router RTA

    E.Issue the no ip split horizon eigrp 1 command on router RTA

    F.Configure a distribute list on router RTA that allows it to advertise all r outes to the spoke routers


    参考答案：E

  • 第15题：

    A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）

    A. Router# show ip eigrp adjacency

    B. Router# show ip eigrp topology

    C. Router# show ip eigrp interfaces

    D. Router# show ip eigrp neighbors


    参考答案：D

  • 第16题：

    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

    • A、TestKing# show eigrp entries
    • B、TestKing# show protocols
    • C、TestKing# debug eigrp routes
    • D、TestKing# show ip route eigrp
    • E、TestKing# show route eigrp

    正确答案:D

  • 第17题：

    What parameters must you specify when you enable EIGRP routing?（）

    • A、The broadcast address, and AS number
    • B、The network number and AS number
    • C、EIGRP routing, network number and passive interface
    • D、EIGRP routing, network number, and AS

    正确答案:D

  • 第18题：

    Which command will display all the EIGRP feasible successor routes known to a router?（）

    • A、Router# show ip eigrp routes *
    • B、Router# show ip eigrp summary
    • C、Router# show ip eigrp topology
    • D、Router# show ip eigrp adjacencies
    • E、Router# show ip eigrp neighbors detail

    正确答案:C

  • 第19题：

    You are attempting to troubleshoot some problems within your local network.Which of the following are router IOS commands that can be used to troubleshoot LAN connectivity problems?（）

    • A、ping
    • B、tracert
    • C、ipconfig
    • D、show ip route
    • E、winipcfg
    • F、show interfaces
    • G、All of the above

    正确答案:A,D,F

  • 第20题：

    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）

    • A、show ip eigrp topology
    • B、show ip eigrp topology all - links
    • C、show ip route eigrp
    • D、show ip route eigrp all - links
    • E、show ip eigrp topology all - learned

    正确答案:B

  • 第21题：

    While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）

    • A、ping
    • B、trace
    • C、show ip route
    • D、show interface
    • E、show cdp neighbors

    正确答案:C

  • 第22题：

    单选题
    In order to troubleshoot an issue with the Testking frame relay network, you log into a remote router via a telnet session and issue the command "debug frame-relay lmi". After a long wait, you fail to see any output. What could be the cause of this problem?（）
    A

    The IP addresses are configured incorrectly.

    B

    Frame Relay LMI messages not displayed in real time.

    C

    The administrator must issue the enable frame-relay lmi debug command.

    D

    The administrator must issue the terminal monitor command.

    E

    Debug messages can only be received once through the console port.

    F

    The administrator must issue the show frame-relay lmi vty 0 4 command


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）
    A

    TestKing# show eigrp entries

    B

    TestKing# show protocols

    C

    TestKing# debug eigrp routes

    D

    TestKing# show ip route eigrp

    E

    TestKing# show route eigrp


    正确答案： D
    解析： 暂无解析

相关内容