What are two results of entering the Switch(config) vtp mode client command on a Catalyst switch?()A. The switch will ignore VTP summary advertisementsB. The switch will forward VTP summary advertisementsC. The switch will process VTP summary advertisemen

题目
What are two results of entering the Switch(config) vtp mode client command on a Catalyst switch?()

A. The switch will ignore VTP summary advertisements

B. The switch will forward VTP summary advertisements

C. The switch will process VTP summary advertisements

D. The switch will originate VTP summary advertisements

E. The switch will create, modify and delete VLANs for the entire VTP domain

相似考题

1.You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)A. Switch(vlan) mode trunkB. Switch(config) switchport access mode trunkC. Switch(config-if) switchport mode trunkD. Switch(config-if) switchport trunk encapsulation dot1qE. Switch(config) switchport access mode 1F. Switch(vlan) trunk encapsulation dot1q

2.在一台cisco catalyst 2950交换机上,要将端口F0／1设置为永久中继模式,需要使用( )配置命令。A、Switch(config-if)#switchport mode accessB、Switch(config-if)#switchport dynamic autoC、Switch(config-if)#switchport mode trunkD、Switch(config-if)#switchport mode dynamic

3.Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()A. Switch(config-if)# vlan allB. Switch(config-if)# switchport trunk encapsulation dot1qC. Switch(config-if)# switchport access vlan allD. Switch(config-if)# switchport mode trunkE. Switch(config-if)# switchport access vlan 303

4.The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?A．It allows two VTP servers to exists in the same domain, each configured with different passwordsB．It is the password required when promoting a switch from VTP client mode to VTP server modeC．It is used to access the VTP server to make changes to the VTP configurationD．It is used to validate the sources of VTP advertisements sent between switchesE．None of the above

更多“What are two results of entering the Switch(config) vtp mode client command on a Catalyst switch?() ”相关问题

  • 第1题：

    Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?()

    A. Configure the switch to be in VTP client mode.

    B. Configure the switch to be in VTP domaint mode.

    C. Configure the switch to be in VTP transparent mode.

    D. Configure the switch to be in VTPv2.


    参考答案：C

  • 第2题：

    What are two characteristics of a switch that is configured as a VTP client?()

    A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.

    B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.

    C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.

    D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.

    E.Vtp client is the default vtp mode

    F.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally


    参考答案：B, D

  • 第3题：

    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）

    • A、The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.
    • B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.
    • C、The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.
    • D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.

    正确答案:B

  • 第4题：

    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?（）

    • A、Switch(config-if)# vlan all
    • B、Switch(config-if)# switchport trunk encapsulation dot1q
    • C、Switch(config-if)# switchport access vlan all
    • D、Switch(config-if)# switchport mode trunk
    • E、Switch(config-if)# switchport access vlan 303

    正确答案:C,D

  • 第5题：

    What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）

    • A、The switch will ignore VTP summary advertisements.
    • B、The switch will forward VTP summary advertisements.
    • C、The switch will process VTP summary advertisements.
    • D、The switch will originate VTP summary advertisements.
    • E、The switch will create, modify and delete VLANs for the entire VTP domain.

    正确答案:B,C

  • 第6题：

    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）

    • A、#vtp domain unset
    • B、#delete vlan.dat
    • C、#no vtp domain
    • D、#vtp domain null

    正确答案:B

  • 第7题：

    On a Cisco Nexus 7000 Series Switch， what is the purpose of this command？（）  switch# config terminal  switch（config）# mac address-table learning-mode conversational vlan 1-10  switch（config）#   

    • A、 Enable conversational learning on FabricPath vlans 1-10 for F-Series module
    • B、 Enable FabricPath protocol on VLANs 1–10
    • C、 No need for this command as conversational learning is enabled by default for all VLANs.
    • D、 Enable conversational learning on Classical Ethernet VLAN for F-Series module

    正确答案:D

  • 第8题：

    What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）

    • A、The switch will ignore VTP summary advertisements
    • B、The switch will forward VTP summary advertisements
    • C、The switch will process VTP summary advertisements
    • D、The switch will originate VTP summary advertisements
    • E、The switch will create, modify and delete VLANs for the entire VTP domain

    正确答案:B,C

  • 第9题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第10题：

    多选题
    What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）
    A

    The switch will ignore VTP summary advertisements

    B

    The switch will forward VTP summary advertisements

    C

    The switch will process VTP summary advertisements

    D

    The switch will originate VTP summary advertisements

    E

    The switch will create, modify and delete VLANs for the entire VTP domain


    正确答案： B,E
    解析： 暂无解析

  • 第11题：

    多选题
    What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）
    A

    The switch will ignore VTP summary advertisements.

    B

    The switch will forward VTP summary advertisements.

    C

    The switch will process VTP summary advertisements.

    D

    The switch will originate VTP summary advertisements.

    E

    The switch will create, modify and delete VLANs for the entire VTP domain.


    正确答案： E,A
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of the command shown below vtp password Fl0r1da（）。
    A

    It is used to validate the sources of VTP advertisements sent between switches.

    B

    It is used to access the VTP server to make changes to the VTP configuration.

    C

    It allows two VTP servers to exist in the same domain, each configured with different passwords.

    D

    It is the password required when promoting a switch from VTP client mode to VTP server mode.

    E

    It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?（）

    A. Switch(config-if)# switchport access vlan 50

    B. Switch(vlan)# vtp server

    C. Switch(config)# config-revision 20

    D. Switch(config)# vlan 50 name Tech

    E. Switch(vlan)# vlan 50

    F. Switch(vlan)# switchport trunk vlan 50


    参考答案：B, E

  • 第14题：

    What is the purpose of the command shown below?vtp password Fl0r1da（）

    • A、It is used to validate the sources of VTP advertisements sent between switches.
    • B、It is used to access the VTP server to make changes to the VTP configuration.
    • C、It allows two VTP servers to exist in the same domain, each configured with different passwords.
    • D、It is the password required when promoting a switch from VTP client mode to VTP server mode.
    • E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

    正确答案:A

  • 第15题：

    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）

    • A、#vtp domain unset
    • B、#delete vlan.dat
    • C、#novtp domain
    • D、#vtp domain null

    正确答案:B

  • 第16题：

    What are two characteristics of a switch that is configured as a VTP client？（）

    • A、if a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.
    • B、The local vlan configuration is updated only when an update that has a higher configuration revision number is received.
    • C、Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.
    • D、When switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.
    • E、Vtp client is the default vtp mode
    • F、On switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally

    正确答案:B,D

  • 第17题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    • A、Switch(config)# switchport trunk encapsulation isl
    • B、Switch(config)# switchport trunk encapsulation ietf
    • C、Switch(config-if)# switchport trunk encapsulation isl
    • D、Switch(config-if)# switchport trunk encapsulation ietf
    • E、Switch(config-if)# switchport trunk encapsulation dot1q

    正确答案:E

  • 第18题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第19题：

    Switch R1 and R2 both belong to the Company VTP domain. What’s true about the switch  operation in VTP domains？（）

    • A、A switch can only reside in one management domain
    • B、A switch is listening to VTP advertisements from their own domain only
    • C、A switch is listening to VTP advertisements from multi domains
    • D、A switch can reside in one or more domains
    • E、VTP is no longer supported on Catalyst switches

    正确答案:A,B

  • 第20题：

    A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?（）

    • A、A switch in the VTP client mode cannot update its local VLAN database.
    • B、A trunk link must be configured between the switches to forward VTP updates.
    • C、A switch in the VTP server mode can update a switch in the VTP transparent mode.
    • D、A switch in the VTP transparent mode will forward updates that it receives to other switches.
    • E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.
    • F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.

    正确答案:A,B,D

  • 第21题：

    单选题
    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）
    A

    The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.

    B

    The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.

    C

    The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.

    D

    The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    多选题
    What are two characteristics of a switch that is configured as a VTP client？（）
    A

    if a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.

    B

    The local vlan configuration is updated only when an update that has a higher configuration revision number is received.

    C

    Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.

    D

    When switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.

    E

    Vtp client is the default vtp mode

    F

    On switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally


    正确答案： B,C
    解析： 暂无解析

  • 第23题：

    单选题
    Assuming the default switch configuration，which approach should you use to configure the extended vlan range（1006 through 4094） on a cisco catalyst 3750 series switch？（）
    A

    Configure the switch to be in VTP client mode.

    B

    Configure the switch to be in VTP domaint mode.

    C

    Configure the switch to be in VTP transparent mode.

    D

    Configure the switch to be in VTPv2.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    多选题
    Switch R1 and R2 both belong to the Company VTP domain. What’s true about the switch  operation in VTP domains？（）
    A

    A switch can only reside in one management domain

    B

    A switch is listening to VTP advertisements from their own domain only

    C

    A switch is listening to VTP advertisements from multi domains

    D

    A switch can reside in one or more domains

    E

    VTP is no longer supported on Catalyst switches


    正确答案： A,E
    解析： 暂无解析

相关内容