Which command is required to apply an access list on a virtual terminal line of a router?()A. Router(config-line)# access-class 10 inB. Router(config-if)# ip access-class 23 outC. Router(config-line)# access-group 15 outD. Router(config-if)# ip access-gro

题目
Which command is required to apply an access list on a virtual terminal line of a router?()

A. Router(config-line)# access-class 10 in

B. Router(config-if)# ip access-class 23 out

C. Router(config-line)# access-group 15 out

D. Router(config-if)# ip access-group 110 in

E. Router(config-line)# access-list 150 in

F. Router(config-if)# ip access-list 128 out

相似考题

1.用标准访问控制列表配置212.33.127.0/24子网主机登录到路由表，虚拟的配置是A．Router(config)#access-list 10 permit 212.33.127.0 255.255.255.0 Router(config)#line vty 0 5 Router(config-line)#access-class 10 inB．Router(config)#access-list 20 permit 212.33.127.0 0.0.0.255 Router(config)#line vty 0 5 Router(config-line)#access-class 20 inC．Router(config)#access-list 99 permit 212.33.127.0 0.0.0.255 Router(config)#line vty 0 5 Router(config-line)#access-class 99 inD．Router(config)#access-list 100 permit 212.33.127.0 0.0.0.255 Router(config)#line vty 0 5 Router(config-line)#access-class 100 in

2.Which configuration component is required to allow a PPP over ATM client to connect to one virtual router for a particular session and to a different virtual router for another session?()A. profileB. domain mapC. IP access-routeD. static IP addressing

3.Which of the following commands would successfully implement an access list on a routers virtual terminal line?()A. RouterTK(config-line)# access-class 10 inB. RouterTK(config-if)# ip access-class 23 outC. RouterTK(config-line)# access-list 150 inD. RouterTK(config-if)# ip access-list 128 outE. RouterTK(config-line)# access-group 15 outF. RouterTK(config-if)# ip access-group 110 in

4.用标准访问控制列表配置只允许212.33.127.0/24子网主机登录到路由表，正确的配置是______。A．Router(config) #access-list 10 permit 212.33.127.0 255.255.255.0 Router(config) #line vty 0 5 Router(config-line) #access-class 10 inB．Router(config) #access-list 20 permit 212.33.127.0 0.0.0.255 Router(config) #line vty 0 5 Router(config-line) #access-class 20 outC．Router(config) #access-list 99 permit 212.33.127.0 0.0.0.255 Router(config) #line vty 0 5 Router(config-line) #access-class 99 inD．Router(config) #access-list 100 permit 212.33.127.0 0.0.0.255 Router(config) #line vty 0 5 Router(config-line) #access-class 100 in

更多“Which command is required to apply an access list on a virtual terminal line of a router?() ”相关问题

  • 第1题：

    You are securing a network for TestKing and want to apply an ACL (access control list) to an interface of a router. Which one of the following commands would you use?()

    A. permit access-list 101 out

    B. ip access-group 101 out

    C. apply access-list 101 out

    D. access-class 101 out

    E. ip access-list e0 out


    参考答案：B

  • 第2题：

    You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?()

    A. Administratively shut down the interface.

    B. Physically secure the interface.

    C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.

    D. Configure a virtual terminal password and login process.

    E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.


    参考答案：D, E

  • 第3题：

    You are securing a network for TestKing and want to apply an ACL (access control list) to an interface of a router. Which one of the following commands would you use?（）

    • A、permit access-list 101 out
    • B、ip access-group 101 out
    • C、apply access-list 101 out
    • D、access-class 101 out
    • E、ip access-list e0 out

    正确答案:B

  • 第4题：

    Which of the following commands would successfully implement an access list on a routers virtual terminal line?（）

    • A、RouterTK(config-line)# access-class 10 in
    • B、RouterTK(config-if)# ip access-class 23 out
    • C、RouterTK(config-line)# access-list 150 in
    • D、RouterTK(config-if)# ip access-list 128 out
    • E、RouterTK(config-line)# access-group 15 out
    • F、RouterTK(config-if)# ip access-group 110 in

    正确答案:A

  • 第5题：

    Which configuration component is required to allow a PPP over ATM client to connect to one virtual router for a particular session and to a different virtual router for another session?（）

    • A、profile
    • B、domain map
    • C、IP access-route
    • D、static IP addressing

    正确答案:A

  • 第6题：

    Which command is required to apply an access list on a virtual terminal line of a router?（）

    • A、Router(config-line)# access-class 10 in
    • B、Router(config-if)# ip access-class 23 out
    • C、Router(config-line)# access-group 15 out
    • D、Router(config-if)# ip access-group 110 in
    • E、Router(config-line)# access-list 150 in
    • F、Router(config-if)# ip access-list 128 out

    正确答案:A

  • 第7题：

    You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines. What command would assign this access- list to the Virtual Terminal Lines?（）

    • A、router(config-line)# ip access-group 1 in
    • B、router(config-line)# access-class 1 in
    • C、router(config-line)# ip access-list 1 in
    • D、router(config-line)# access-line 1 in

    正确答案:B

  • 第8题：

    What can be done to secure the virtual terminal interfaces on a router? （）

    • A、Administratively shut down the interface.
    • B、Physically secure the interface.
    • C、Create an access list and apply it to the virtual terminal interfaces with the access-group command.
    • D、Configure a virtual terminal password and login process.
    • E、Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

    正确答案:D,E

  • 第9题：

    单选题
    Which of the following commands would successfully implement an access list on a routers virtual terminal line?（）
    A

    RouterTK(config-line)# access-class 10 in

    B

    RouterTK(config-if)# ip access-class 23 out

    C

    RouterTK(config-line)# access-list 150 in

    D

    RouterTK(config-if)# ip access-list 128 out

    E

    RouterTK(config-line)# access-group 15 out

    F

    RouterTK(config-if)# ip access-group 110 in


    正确答案： C
    解析： 暂无解析

  • 第10题：

    多选题
    You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?（）
    A

    Administratively shut down the interface.

    B

    Physically secure the interface.

    C

    Create an access list and apply it to the virtual terminal interfaces with the access-group command.

    D

    Configure a virtual terminal password and login process.

    E

    Enter an access list and apply it to the virtual terminal interfaces using the access-class command.


    正确答案： D,E
    解析： 暂无解析

  • 第11题：

    单选题
    You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines. What command would assign this access- list to the Virtual Terminal Lines?（）
    A

    router(config-line)# ip access-group 1 in

    B

    router(config-line)# access-class 1 in

    C

    router(config-line)# ip access-list 1 in

    D

    router(config-line)# access-line 1 in


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You are securing a network for TestKing and want to apply an ACL (access control list) to an interface of a router. Which one of the following commands would you use?（）
    A

    permit access-list 101 out

    B

    ip access-group 101 out

    C

    apply access-list 101 out

    D

    access-class 101 out

    E

    ip access-list e0 out


    正确答案： E
    解析： 暂无解析

  • 第13题：

    You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines.What command would assign this access- list to the Virtual Terminal Lines?（）

    A. router(config-line)# ip access-group 1 in

    B. router(config-line)# access-class 1 in

    C. router(config-line)# ip access-list 1 in

    D. router(config-line)# access-line 1 in


    参考答案：B

  • 第14题：

    What can be done to secure the virtual terminal interfaces on a router?()

    A. Administratively shut down the interface.

    B. Physically secure the interface.

    C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.

    D. Configure a virtual terminal password and login process.

    E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.


    参考答案：D, E

  • 第15题：

    Which can be done to secure the virtual terminal interfaces on a router？（）

    • A、Administratively shut down the interfaces.
    • B、Physically secure the interfaces.
    • C、Configure a virtual terminal password and login process.
    • D、Enter an access list and apply it to the terminal interfaces using the access-class command.
    • E、Create an access list and apply it to the terminal interfaces using the access-groupc ommand.

    正确答案:C,D

  • 第16题：

    A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）

    • A、Router# ping 192.168.13.26
    • B、Router# debug access-list 172
    • C、Router# show open ports 192.168.13.26
    • D、Router# show access-list
    • E、Router# show ip interface

    正确答案:A,D,E

  • 第17题：

    Which can be done to secure the virtual terminal interfaces on a router？（）

    • A、Administratively shut down the interfaces.
    • B、Physically secure the interfaces.
    • C、Configure a virtual terminal password and login process.
    • D、Enter an access list and apply it to the terminal interfaces using the access-class command.
    • E、Create an access list and apply it to the terminal interfaces using the access-group command

    正确答案:C,D

  • 第18题：

    Which can be done to secure the virtual terminal interfaces on a router?（）

    • A、Administratively shut down the interfaces.
    • B、Physically secure the interfaces.
    • C、Configure a virtual terminal password and login process.
    • D、Enter an access list and apply it to the terminal interfaces using the access-class command.
    • E、Create an access list and apply it to the terminal interfaces using the access-group command.

    正确答案:C,D

  • 第19题：

    As a network administrator, you have been instructed to prevent all traffic originating on the LAN from entering the R2 router. Which the following command would implement the access list on the interface of the R2 router?（）

    • A、access-list 101 in
    • B、access-list 101 out
    • C、ip access-group 101 in
    • D、ip access-group 101 out

    正确答案:C

  • 第20题：

    Which can be done to secure the virtual terminal interfaces on a router?（）

    • A、Administratively shut down the interfaces.
    • B、Physically secure the interfaces.
    • C、Configure a virtual terminal password and login process.
    • D、Enter an access list and applyit to the terminal interfaces using theaccess-class command.
    • E、Create an access list and applyit to the terminal interfaces using theaccess-group command.

    正确答案:C,D

  • 第21题：

    单选题
    Which command is required to apply an access list on a virtual terminal line of a router?（）
    A

    Router(config-line)# access-class 10 in

    B

    Router(config-if)# ip access-class 23 out

    C

    Router(config-line)# access-group 15 out

    D

    Router(config-if)# ip access-group 110 in

    E

    Router(config-line)# access-list 150 in

    F

    Router(config-if)# ip access-list 128 out


    正确答案： E
    解析： 暂无解析

  • 第22题：

    多选题
    Which can be done to secure the virtual terminal interfaces on a router?（）
    A

    Administratively shut down the interfaces.

    B

    Physically secure the interfaces.

    C

    Configure a virtual terminal password and login process.

    D

    Enter an access list and applyit to the terminal interfaces using theaccess-class command.

    E

    Create an access list and applyit to the terminal interfaces using theaccess-group command.


    正确答案： C,D
    解析： 暂无解析

  • 第23题：

    多选题
    Which can be done to secure the virtual terminal interfaces on a router？（）
    A

    Administratively shut down the interfaces.

    B

    Physically secure the interfaces.

    C

    Configure a virtual terminal password and login process.

    D

    Enter an access list and apply it to the terminal interfaces using the access-class command.

    E

    Create an access list and apply it to the terminal interfaces using the access-groupc ommand.


    正确答案： C,A
    解析： 暂无解析

相关内容