A server is configured with two network cards. To utilize the bandwidth of both network cards at the same time without assigning more than one IP address, which of the following load balancing techniques should be used?（）A. ClusteringB. NIC teamingC. OSPF

题目

A server is configured with two network cards. To utilize the bandwidth of both network cards at the same time without assigning more than one IP address, which of the following load balancing techniques should be used?（）

A. Clustering

B. NIC teaming

C. OSPF

D. VLAN tagging

相似考题

1.路由器R1的拓扑连接和地址分配如下图所示，如果在R1上安装OSPF协议，运行命令：router ospf 200，则配置E0和E1端口的命令分别是______。A．network 10.1.1.0 255.255.255.0 area 0 network 192.168.1.0 255.255.255.0 area 1B．network 10.1.1.1 255.255.255.0 area 0 network 192.168.1.1 255.255.255.0 area 1C．network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1D．network 10.1.1.0 0.0.0．255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1

2.Whilereviewingclusterlogs，andadministratornoticethatanevent，network_downrs232a，occurredonthepreviousday.Afterverifyingthephysicalnetworkconnectionsanddevicestates，whatcommandcanbeusedtoverifytheclusterstate？（）A.clstatB.cllsifC.clsnapshotinfoD.clcheck_server

3.YouhavejustrunthissyntaxtostartthelistenerfromtheListenerControlutility：LSNRCTL>STARTStarting/mstgelai/oracle/bin/tnslsnr：pleasewait…Systemparameterfileis/u01/oracle/network/admin/listener.oraLogmessageswrittento/u01/oracle/network/log/listener.logListeningon：（DESCRIPTION=（ADDRESS=（PROTOCOL=tcp）（HOST=stc-sun01-server）（PORT=1521）））Connectingto…ThecommandcompletedsuccessfullyWhatisthenameoftheListeneryoustarted？（）A.TNSLSNRB.LISTENERC.LOCAL_LISTENERD.DEFAULT_LSRN

4.WhichofthefollowingClassAnetworksisreservedfor"privatenetworks"useonly?()A.network10.0.0.0B.network127.0.0.0C.network129.135.0.0D.network192.168.0.0

更多“A server is configured with two network cards. To utilize the bandwidth of both network ca ”相关问题

  • 第1题：

    Refertotheexhibit.WhichofthefollowingIOSDHCPconfigurationstatementsisrequiredsothataCiscoskinny－basedIPphonecanconnectwithCallManager?()

    A.ipdhcppoolClient

    B.network10.1.1.0255.255.255.240

    C.default-router10.1.1.1

    D.dns-server10.2.2.2

    E.domain-namecisco.com

    F.option150ip10.3.3.3


    参考答案：F

  • 第2题：

    The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?()

    A.network 172.26.168.0 area 478

    B.network 172.26.0.0

    C.network 172.26.168.128 0.0.0.127

    D.network 172.26.168.128 area 478


    参考答案：B

  • 第3题：

    下列命令中，正确的是：

    A．network 172.16.1.0 0.0.0.255 area 1

    B．network 172.16.1.0 255.0.0.0 area 0

    C．network 172.16.0.0 255.255.0.0 area 0

    D．network 172.16.1.0 255.255.255.0 area 1


    功能相同;一次可删除一个或多个存档文件;不可删除子目录

  • 第4题：

    The Testking Network consists of the following 5 IP networks:NETWORK 1: 192.168.10.0/26NETWORK 2: 192.168.10.64/27NETWORK 3: 192.168.10.96/27NETWORK 4: 192.168.10.128/30NETWORK 5: 192.168.10.132/30Which of the following routing protocols will support this IP addressing scheme?（）

    A. RIP version 1

    B. RIP version 2

    C. IGRP

    D. EIGRP

    E. OSPF

    F. BGP


    参考答案：B, D, E

  • 第5题：

    Which routing protocols will support the following IP addressing scheme? （）Network 1 - 192.168.10.0 /26Network 2 - 192.168.10.64 /27Network 3 - 192.168.10.96 /27Network 4 - 192.168.10.128 /30Network 5 - 192.168.10.132 /30

    A.RIP version 1

    B.RIP version 2

    C.IGRP

    D.EIGRP

    E.OSPF


    参考答案：B, D, E

  • 第6题：

    【单选题】要在路由器 B 上为所有相连网络启用 RIP，正确的命令是怎样的？

    A．RouterB# router rip RouterB(router)# network 210.36.7.0 RouterB(router)# network 220.17.29.0 RouterB(router)# network 211.168.74.0

    B．RouterB(config)# router rip RouterB(config-router)# network 198.16.4.0 RouterB(config-router)# network 211.168.74.0 RouterB(config-router)# network 199.84.32.0

    C．RouterB(config)# configure router rip RouterB(config-router)# network 210.36.7.0 RouterB(config-router)# network 199.84.32.0 RouterB(conf


    C

相关内容