Which option is correct to configure the maximum transmit packet size of a Fast Ethernet interface?()A.set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200B.set interfaces fe-0/0/0 mtu 1200C.set interfaces fe-0/0/0 unit 0 mtu 1200D.set interfaces fe-0

题目
Which option is correct to configure the maximum transmit packet size of a Fast Ethernet interface?()

A.set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200

B.set interfaces fe-0/0/0 mtu 1200

C.set interfaces fe-0/0/0 unit 0 mtu 1200

D.set interfaces fe-0/0/0.0 mtu 1200

相似考题

1.从哪个菜单配置AP?A、Configure＞APsB、Configure＞Controllers＞APsC、Configure＞Access PointsD、不配置AP，只配置控制器。AP会自动与控制器配置同步A．B．C．D．

2.Your database is5GB and contain satablenamed Sales History.Salesinformationisfrequentlyinsertedandupdated.Youdiscoverthatexcessivepagesplittingisoccurring.Youneed toreducetheoccurr enceofpagesplittinginthe Sales History table.Whichcodesegmentshouldyou use?（）A.ALTERDATABASESalesMODIFYFILE(NAME=Sales dat3,SIZE=10GB)B.ALTERINDEXALLONSales.Sales HistoryREBUILDWITH(FILLFACTOR=60)C.EXECsys.sp_configure‘fillfactor(%)‘,‘60‘D.UPDATESTATISTICSSales.Sales History(Products)WITHFULLSCAN,NORECOMPUTE

3.WhichthreeinitializationparametersarenolongerneededwhenFAST_START_MTTR_TARGETisdefined?()A.TARGET_REDO_BLKSB.FAST_START_IO_TARGETC.LOG_CHECKPOINT_TIMEOUTD.RECOVERY_ESTIMATED_IOSE.LOG_FILE_SIZE_REDO_BLKSF.LOG_CHECKPOINT_INTERVAL

4.AcustomerisdeployinganewdatabaseonaPS701BladeinaBladeCenterH,andrequiresredundant networkandSANadapters.Whichconfigurationsupportsthecustomerrequirement?()A.Configure2CFFhcombinationfibrechannel/gigabitEthernetadaptersB.Configure1CFFh2-portfibrechanneladapterand1CIOv2-portgigabitEthernetadapterC.Configure1CIOv2-portfibrechanneladapterand1CFFhcombinationfibrechannel/gigabitEthernet adapterD.Configure1CIOv2-portgigabitEthernetadapterand1CFFhcombinationfibrechannel/gigabitEthernet adapter

更多“Which option is correct to configure the maximum transmit packet size of a Fast Ethernet interface?() ”相关问题

  • 第1题：

    A PC on a network segment sends data to another PC on a different segment.Which of the following correctly describe the correct order of how this data will be encapsulated?()

    A. Data, Frame, Packet, Segment, Bit

    B. Data, Frame, Segment, Packet, Bit

    C. Data, Packet, Frame, Segment, Bit

    D. Data, Packet, Segment, Frame, Bit

    E. Data, Segment, Frame, Packet, Bit

    F. Data, Segment, Packet, Frame, Bit


    参考答案：F

  • 第2题：

    某公司的网络拓扑如图4-1所示，随着业务的发展，接待区wifi的接入设备过多，导致掉线不稳定。网络管理员提出进行改造，设计如图2的接待区所示。



    问题2（2分） 在防火墙上配置nat地址映射，允许企业内部server1服务器对外提供服务web服务，相关配置如下
    [NGFW-Ethernet0/0/1]nat server protocol tcp global current-interface 8080 inside 192.168.200.80 www
    以下说法正确的是（13） 。
    （13）备选答案
    A.在互联网上访问企业WEB服务器只需要在浏览器中输入http://192.168.10.80
    B.nat配置命令中的current-interface参数可以写成NGFW-Ethernet0/0/1的接口地址
    C.nat配置命令中的current-interface参数可以替换成nat地址池中的IP
    D.如果以NGFW-Ethernet0/0/1的接口IP作为公网WEB映射地址，则必须使用current-interface参数


    答案：
    解析：
    （13） D

  • 第3题：

    在三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    A

  • 第4题：

    摩托罗拉BSS／RXCDR参数中,“x25config_packet_size”的参数取值范围是()

    A.32

    B.128

    C.256

    D.512

    E.64


    参考答案：B, C, D

  • 第5题：

    三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    [SW1-Vlan-interface10]ip address 10.0.0.1 24

  • 第6题：

    2、在三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    A

相关内容