An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN

题目

An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?（）

A. Switch(config-if)# switchport access vlan 50

B. Switch(vlan)# vtp server

C. Switch(config)# config-revision 20

D. Switch(config)# vlan 50 name Tech

E. Switch(vlan)# vlan 50

F. Switch(vlan)# switchport trunk vlan 50

相似考题

1.While troubleshooting a video problem on an application server, the system administrator has determined that the video firmware should be updated. Which of the following sources should be used to locate an appropriate update for this hardware?（）A. Third-party manufacturerB. Video chipset manufacturerC. Server manufacturerD. Operating system manufacturerE. Shareware file sharing site

2. A new building has been added to the enterprise campus network， providing client access for desktop PCs， laptops， and IP phones for employees and guests. During verification， only a few laptops using  wireless are reported to have problems， while other desktops， IP phones， and most other wireless laptops are fully operational. Additional information received about the problem indicates that， while the problematic wireless laptops cannot reach internal corporate websites， they can reach the Internet.  Where should troubleshooting about this connectivity issue be focused？（）A、client network configurationB、VLAN mappingC、routing protocolsD、first-hop redundancy protocol

3.While troubleshooting a connectivity problem, a network administrator notices that a port status LED on a Cisco Catalyst series switch is alternating green and amber. Which condition could this indicate?（）A、The port is experiencing errors.B、The port is administratively disabled.C、The port is blocked by spanning tree.D、The port has an active link with normal traffic activity.

4.While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）A、A remote physical layer problem exists.B、The host NIC is not functioning.C、TCP/IP has not been correctly installed on the host.D、A local physical layer problem exists.

更多“An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the p ”相关问题

  • 第1题：

    The Company administrator has issue the "show vlan id 5" command.  What will this command  display？ （）

    • A、 Ports in VLAN 5
    • B、 Utilization
    • C、 VLAN information on port 0/5
    • D、 Filters
    • E、 MTU and type

    正确答案:A,E

  • 第2题：

    You are a senior network administrator at TestKing and your trusty junior administrator tells you that he failed his task of adding VLAN 50 to a Catalyst switch in the network. You enter in the 'show vtp status' command and get this output: TK2# show vtp status VTP Version :2 Configuration Revision :7 Maximum VLANs supported local :68 Number of existing VLANs :8 VTP Operating Mode :Client VTP Domain Name :corp VTP Pruning Mode :Disabled VTP V2 Mode :Disabled VTP Traps Generation :Disabled MD5 digest :0x22 0xF3 0x1A Configuration last modified by 172.18.22.15 at 5-28-03 1t:53:20 What commands must be issued on this switch to add VLAN 50 to the database?（）

    • A、TK2(config-if)# switchport access vlan 50
    • B、TK2(vlan)# vtp server
    • C、TK2(config)# config-revision 20
    • D、TK2(config)# vlan 50 name Tech
    • E、TK2(vlan)# vlan 50
    • F、TK2(vlan)# switchport trunk vlan 50

    正确答案:B,E

  • 第3题：

    An administrator is troubleshooting a power supply that is believed to have failed. Which of the following tools will BEST help test the power supply？（）

    • A、ESD Equipment
    • B、Multimeter
    • C、POST Card
    • D、Toner Probe

    正确答案:B

  • 第4题：

    While troubleshooting a video problem on an application server, the system administrator has determined that the video firmware should be updated. Which of the following sources should be used to locate an appropriate update for this hardware?（）

    • A、Third-party manufacturer
    • B、Video chipset manufacturer
    • C、Server manufacturer
    • D、Operating system manufacturer
    • E、Shareware file sharing site

    正确答案:B,C

  • 第5题：

    When adding another server to an existing rack mount system, which of the following should the administrator consider FIRST?（）

    • A、Load on UPS
    • B、Rack temperature
    • C、Room temperature
    • D、Ease of access

    正确答案:B

  • 第6题：

    An administrator logs into a server and notices slow performance.While troubleshooting the problem the administrator notices that an unfamiliar process in the Task Manager is running at 100% CPU usage.The administrator tries to end the task and receives ‘Access is denied’.  Which of the following steps would allow the administrator to terminate that process？（）

    • A、Adding the ‘Run as a service’ permission to their account.
    • B、Running the kill utility.
    • C、Adding their account to the remote users group.
    • D、Ending the services.exe process then ending the runaway process.

    正确答案:B

  • 第7题：

    A System p administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down.  Where should the system administrator look for the console log， assuming it is in the default location（）

    • A、/var/log/conslog
    • B、/var/log/console.log
    • C、/var/adm/ras/conslog
    • D、/var/ras/console.log

    正确答案:C

  • 第8题：

    单选题
    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）
    A

    A remote physical layer problem exists.

    B

    The host NIC is not functioning.

    C

    TCP/IP has not been correctly installed on the host.

    D

    A local physical layer problem exists.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A System p administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down.  Where should the system administrator look for the console log， assuming it is in the default location（）
    A

    /var/log/conslog

    B

    /var/log/console.log

    C

    /var/adm/ras/conslog

    D

    /var/ras/console.log


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    While troubleshooting a connectivity problem, a network administrator notices that a port status LED on a Cisco Catalyst series switch is alternating green and amber. Which condition could this indicate（）。
    A

    The port is experiencing errors

    B

    The port is administratively disabled

    C

    The port is blocked by spanning tree

    D

    The port has an active link with normal traffic activity


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    You are the network administrator of a small Layer 2 network with 50 users. Lately， users have been complaining that the network is very slow. While troubleshooting， you notice that the CAM table of your switch is full， although it supports up to 12，000 MAC addresses. How can you solve this issue and prevent it from happening in the future？（）
    A

    Upgrade the switches

    B

    Configure BPDU guard

    C

    Configure VLAN access lists

    D

    Configure port security

    E

    Configure Dynamic ARP inspection


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator has encountered a problem with a particular piece of software installed on the server and begins the troubleshooting process. Which of the following is the FIRST place the administrator should look for specific information about the problem?（）
    A

    The supporting documentation

    B

    The vendor website

    C

    The Internet

    D

    The server event logs


    正确答案： A
    解析： 暂无解析

  • 第13题：

    You are troubleshooting a Catalyst 5000 trunk in the network. What should you do if there’s adisagreement about the VLANs configured to use the trunk？（）

    • A、Reload the active VLAN configuration
    • B、Clear the affected port and bring it up again
    • C、Explicitly set the trunk for the VLAN to be on
    • D、Remove all the VLANs set

    正确答案:B

  • 第14题：

    The administrator has issue the "show vlan id 5" command. What will this command display？（）

    • A、Ports in VLAN 5
    • B、Utilization
    • C、VLAN information on port 0/5
    • D、Filters
    • E、MTU and type

    正确答案:A,E

  • 第15题：

    An administrator has ordered a new server and setup a dedicated RAID 1 array for the application database. While troubleshooting with performance monitoring tools， the administrator is receiving lowerread/write speeds than expected.  Which of the following would be the MOST likely cause for the lower performance？（）

    • A、 The BIOS needs to be upgraded.
    • B、 The administrator did not add the right amount of memory.
    • C、 There is a cooling issue with the server.
    • D、 The administrator did not order high enough RPM drives.

    正确答案:D

  • 第16题：

    An administrator has encountered a problem with a particular piece of software installed on the server and begins the troubleshooting process. Which of the following is the FIRST place the administrator should look for specific information about the problem?（）

    • A、The supporting documentation
    • B、The vendor website
    • C、The Internet
    • D、The server event logs

    正确答案:D

  • 第17题：

    A server administrator implements a solution that should fix an issue. Which of the following should the administrator do NEXT in the troubleshooting process？（）

    • A、Notify users impacted by the problem
    • B、Verify full system functionality
    • C、Document the actions and outcomes
    • D、Identify the scope of the problem

    正确答案:B

  • 第18题：

    An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration?（）

    • A、lsmap -all
    • B、lsmap -net
    • C、lsmap -ent
    • D、lsmap -vlan

    正确答案:B

  • 第19题：

    单选题
    While troubleshooting a connectivity problem, a network administrator notices that a port status LED on a Cisco Catalyst series switch is alternating green and amber. Which condition could this indicate?（）
    A

    The port is experiencing errors.

    B

    The port is administratively disabled.

    C

    The port is blocked by spanning tree.

    D

    The port has an active link with normal traffic activity.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    You are the network administrator of a small Layer 2 network with 50 users. Lately， users have beencomplaining that the network is very slow. While troubleshooting， you notice that the CAM table of yourswitch is full， although it supports up to 12， 000 MAC addresses. How can you solve this issue and preventit from happening in the future？（）
    A

    Upgrade the switches

    B

    Configure BPDU guard

    C

    Configure VLAN access lists

    D

    Configure port security

    E

    Configure Dynamic ARP inspection


    正确答案： E
    解析： 暂无解析

  • 第21题：

    多选题
    While troubleshooting a video problem on an application server, the system administrator has determined that the video firmware should be updated. Which of the following sources should be used to locate an appropriate update for this hardware?（）
    A

    Third-party manufacturer

    B

    Video chipset manufacturer

    C

    Server manufacturer

    D

    Operating system manufacturer

    E

    Shareware file sharing site


    正确答案： B,D
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator logs into a server and notices slow performance.While troubleshooting the problem the administrator notices that an unfamiliar process in the Task Manager is running at 100% CPU usage.The administrator tries to end the task and receives ‘Access is denied’.  Which of the following steps would allow the administrator to terminate that process？（）
    A

    Adding the ‘Run as a service’ permission to their account.

    B

    Running the kill utility.

    C

    Adding their account to the remote users group.

    D

    Ending the services.exe process then ending the runaway process.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator has encountered a problem with a particular piece of software installed on the serverand begins the troubleshooting process. Which of the following is the FIRST place the administrator should look for specific information about the problem？（）
    A

     The supporting documentation

    B

     The vendors website

    C

     The Internet

    D

     The servers event logs


    正确答案： C
    解析： 暂无解析

相关内容