Which are valid modes for a switch port used as a VLAN trunk?()A.transparentB.autoC.onD.desirableE.blockingF.forwarding

题目
Which are valid modes for a switch port used as a VLAN trunk?()

A.transparent

B.auto

C.on

D.desirable

E.blocking

F.forwarding

相似考题

1.When a switch port is used as a VLAN trunk, which of the following trunk modes are valid? (Select all that apply.)A. BlockingB. AutoC. DesirableD. OnE. TransparentF. Learning

2.Which commands, when used together, would create an 802.1Q link?()A. Switch(vlan)# mode trunkB. Switch(config)# switchport access mode trunkC. Switch(config-if)# switchport mode trunkD. Switch(config-if)# switchport trunk encapsulation dot1qE. Switch(config)# switchport access mode 1F. Switch(vlan)# trunk encapsulation dot1q

3.Which are valid modes for a switch port used as a VLAN trunk? ()A.transparentB.autoC.onD.desirable

4.You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)A. Switch(vlan) mode trunkB. Switch(config) switchport access mode trunkC. Switch(config-if) switchport mode trunkD. Switch(config-if) switchport trunk encapsulation dot1qE. Switch(config) switchport access mode 1F. Switch(vlan) trunk encapsulation dot1q

更多“Which are valid modes for a switch port used as a VLAN trunk?() ”相关问题

  • 第1题：

    Which three statements about VTP features are true?()

    A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies

    B.Each broadcast domain on a switch can have its own unique VTP domain

    C.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.

    D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.

    E.VTP pruning is used to increase available bandwidth in trunk links

    F.Client,server,and transparent are valid VTP modes

    G. To configure a switch to be part of two VTP domains,each domain must have its own passwords


    参考答案：A, E

  • 第2题：

    Which commands, when used together, would create an 802.1Q link?（）

    • A、Switch(vlan)# mode trunk
    • B、Switch(config)# switchport access mode trunk
    • C、Switch(config-if)# switchport mode trunk
    • D、Switch(config-if)# switchport trunk encapsulation dot1q
    • E、Switch(config)# switchport access mode 1
    • F、Switch(vlan)# trunk encapsulation dot1q

    正确答案:C,D

  • 第3题：

    Which are valid modes for a switch port used as a VLAN trunk (Choose three.)（）。

    • A、transparent
    • B、auto
    • C、on
    • D、desirable
    • E、blocking
    • F、forwarding

    正确答案:B,C,D

  • 第4题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）

    • A、The switch must be configured with an IP address,subnet mask,and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch port.
    • F、The switch must be fully configured as an SNMP agent.

    正确答案:A,C

  • 第5题：

    Which command alone will disable trunking on a Layer 2 switch port？（）

    • A、no switchport trunk native vlan vlan-id
    • B、switchport nonegotiate
    • C、no switchport mode dynamic desirable
    • D、switchport mode access

    正确答案:D

  • 第6题：

    Which are valid modes for a switch port used as a VLAN trunk?（）

    • A、transparent
    • B、auto
    • C、on
    • D、desirable
    • E、blocking
    • F、forwarding

    正确答案:B,C,D

  • 第7题：

    When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）

    • A、Blocking
    • B、Auto
    • C、Desirable
    • D、On
    • E、Transparent
    • F、Learning

    正确答案:B,C,D

  • 第8题：

    If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1，  which trunk mode  would you set the local port to on R1 if you wanted it to respond to requests from its link partner  （R2） and become a trunk？ （）

    • A、 Auto
    • B、 Negotiate
    • C、 Designate
    • D、 No negotiate

    正确答案:A

  • 第9题：

    单选题
    If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1，  which trunk mode  would you set the local port to on R1 if you wanted it to respond to requests from its link partner  （R2） and become a trunk？ （）
    A

     Auto

    B

     Negotiate

    C

     Designate

    D

     No negotiate


    正确答案： A
    解析： 暂无解析

  • 第10题：

    多选题
    Which three statements about VTP features are true?（）
    A

    When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies

    B

    Each broadcast domain on a switch can have its own unique VTP domain

    C

    VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.

    D

    When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.

    E

    VTP pruning is used to increase available bandwidth in trunk links

    F

    Client,server,and transparent are valid VTP modes

    G

    To configure a switch to be part of two VTP domains,each domain must have its own passwords


    正确答案： G,D
    解析： 暂无解析

  • 第11题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
    A

    The switch must be configured with an IP address, subnet mask, and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch


    正确答案： E,B
    解析： 暂无解析

  • 第12题：

    单选题
    Which command alone will disable trunking on a Layer 2 switch port？（）
    A

    no switchport trunk native vlan vlan-id

    B

    switchport nonegotiate

    C

    no switchport mode dynamic desirable

    D

    switchport mode access


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which are valid modes for a switch port used as a VLAN trunk (Choose three.)()。

    A.transparent

    B.auto

    C.on

    D.desirable

    E.blocking

    F.forwarding


    参考答案：B, C, D

  • 第14题：

    Which two of the following statements describe a routed switch port on a multilayer switch？（）

    • A、Layer 2 switching and Layer 3 routing are mutually supported.
    • B、The port will not be associated with any VLAN.
    • C、The routed switch port supports VLAN subinterfaces.
    • D、The routed switch port is used when a switch has only one port per VLAN or subnet.
    • E、The routed switch port ensures that STP remains in the forwarding state.

    正确答案:B,D

  • 第15题：

    中兴ZXCTN设备在进行初始化时，以下哪个选项命令是不属于MCC监控命令的脚本（）

    • A、snmp-server packetsize 8192
    • B、interface vlan 3001；ip address 139.9.1.6255.255.255.252；exit
    • C、vlan3001；exit
    • D、interface xgei_9/1；mcc-vlanid3001；switchport mode trunk；switch port trunk vlan 3001；switch port trunk native vlan 3001；exit

    正确答案:A

  • 第16题：

    A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv.  Interface fastethernet 1/10  Switchport mode trunk  Switchport trunk allowed vlan all  Channel-group 10 mode on  No shut  Interface fastethernet 1/11   Switchport mode trunk  Switchport trunk allowed vlan all  Channel-group 10 mode on  No shut  Interface port-channel 10   Switchport mode trunk  Switchport allowed vlan all No shut  Which Port Channel configuration must be used on the Nexus 1000v port-profile？（）

    • A、 MAC pinning
    • B、 Cisco Discovery Protocol pinning
    • C、 Mode On
    • D、 Mode Active
    • E、 No port channel configuration

    正确答案:C

  • 第17题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）

    • A、The switch must be configured with an IP address, subnet mask, and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch

    正确答案:A,C

  • 第18题：

    A switch port on TK1 is being configured to support 802.1Q trunking.  Which of the following are true about 802.1Q trunking？（）

    • A、Both switches must be in the same VTP domain.
    • B、The encapsulation type of both ends of the trunk does not have to match.
    • C、The native VLAN on both ends of the trunk must be VLAN 1.
    • D、802.1Q trunking can only be configured on a Layer 2 port.
    • E、In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.

    正确答案:E

  • 第19题：

    Which are valid modes for a switch port used as a VLAN trunk? （）

    • A、transparent
    • B、auto
    • C、on
    • D、desirable

    正确答案:B,C,D

  • 第20题：

    多选题
    Which two commands can be used to verify a trunk link configuration status on a given cisco switch?（）
    A

    show interfaces interface

    B

    show interfaces trunk

    C

    show interfaces switchport

    D

    show ip interface brief

    E

    show interfaces vlan


    正确答案： A,E
    解析： 暂无解析

  • 第21题：

    多选题
    When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）
    A

    Blocking

    B

    Auto

    C

    Desirable

    D

    On

    E

    Transparent

    F

    Learning


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）
    A

    The switch must be configured with an IP address,subnet mask,and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch port.

    F

    The switch must be fully configured as an SNMP agent.


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    多选题
    Which are valid modes for a switch port used as a VLAN trunk? (Choose three.)（）
    A

    transparent

    B

    auto

    C

    on

    D

    desirable

    E

    blocking

    F

    forwarding


    正确答案： D,E
    解析： 暂无解析

  • 第24题：

    多选题
    Which two of the following statements describe a routed switch port on a multilayer switch？（）
    A

    Layer 2 switching and Layer 3 routing are mutually supported.

    B

    The port will not be associated with any VLAN.

    C

    The routed switch port supports VLAN subinterfaces.

    D

    The routed switch port is used when a switch has only one port per VLAN or subnet.

    E

    The routed switch port ensures that STP remains in the forwarding state.


    正确答案： C,E
    解析： 暂无解析

相关内容