Which command is used to copy the configuration from RAM into NVRAM?()A. copy running-config startup-configB. copy startup-config: running-configC. copy running config startup configD. copy startup config running configE. write terminal

题目
Which command is used to copy the configuration from RAM into NVRAM?()

A. copy running-config startup-config

B. copy startup-config: running-config

C. copy running config startup config

D. copy startup config running config

E. write terminal

相似考题

1.把路由器配置脚本从RAM写入NVRAM的命令是(53)。A．save ram nvramB．save ramC．copy running-config startup-configD．copy all

2.After editing to your device’s configuration, which command must you enter to activate the configuration changes?()A. setB. copy candidate activeC. apply-configD. commit

3.Which configuration command is used to send debug level events to the console in real time?()A.AB.BC.CD.D

4.把路由器配置脚本从RAM写入NVRAM的命令是——。A．save ram nvramB．save ramC．copy running—config startup—configD．copy all

更多“Which command is used to copy the configuration from RAM into NVRAM?() ”相关问题

  • 第1题：

    Which command will reinitialize the router and totally replace the running configuration with the current startup configuration?()

    A. TestKingB#reload

    B. TestKingB# copy tftp startup-config

    C. TestKingB# copy startup.-config running-config

    D. TestKingB# copy running-config flash

    E. TestKingB# setup


    参考答案：A

  • 第2题：

    Which command is used to load a configuration from a TFTP server and merge the configuration into RAM?()

    A. copy running-config: TFTP:

    B. copy TFTP: running-config

    C. copy TFTP: startup-config

    D. copy startup-config: TFTP:


    参考答案：B

  • 第3题：

    Which command is used to load a configuration from a TFTP server and merge the configuration into RAM?（）

    • A、copy running-config: TFTP
    • B、copy TFTP: running-config
    • C、copy TFTP: startup-config
    • D、copy startup-config: TFTP

    正确答案:B

  • 第4题：

    Which of the following is an accurate description of the command copy startup-configftp：//kevin：cisco@192.168.1.74？（）

    • A、The configuration on the FTP server is copied to RAM
    • B、The command is not valid on a Cisco router
    • C、The configuration file in RAM is copied to an FTP server
    • D、The configuration file in NVRAM is copied to an FTP server
    • E、The configuration on the FTP server is copied to NVRAM
    • F、The configuration will be copied from NVRAM to an FTP server with a filename of Kevin

    正确答案:D

  • 第5题：

    You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?（）

    • A、RAM should be erased and the router restarted.
    • B、Flash should be erased and the router restarted.
    • C、NVRAM should be erased and the router restarted.
    • D、The new configuration should be entered and saved.

    正确答案:D

  • 第6题：

    Which command is used to load a configuration from a TFTP server and merge the configuration into RAM？（）

    • A、copy running-config: TFTP:
    • B、copy TFTP: running-config
    • C、copy TFTP: startup-config
    • D、copy startup-config: TFTP:

    正确答案:B

  • 第7题：

    After an unsuccessful synchronization or DARE update， which copy of the HACMP ODM remains  To prevent further changes from being made？（）  

    • A、 The ’Default’ configuration directory
    • B、 The ’Active’ configuration directory
    • C、 The ’Staging’ configuration directory
    • D、 The ’Snapshot’ configuration directory

    正确答案:C

  • 第8题：

    单选题
    You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）
    A

    It is used to restart the router.

    B

    It is used to bypass the configuration in NVRAM.

    C

    It is used to enter ROM Monitor mode.

    D

    It is used to view the lost password.

    E

    It is used to save the changes to the configuration.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    You enter configuration mode with the configure command. You need to abort the changes that you have made and start again with a fresh copy of the active configuration. Which command should you use?（）
    A

    rollback 0

    B

    load active

    C

    reset config

    D

    clear candidate config


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）
    A

    The default administrative distance is used.

    B

    The command is used to establish a static route.

    C

    The command is used to configure the router interfaces.

    D

    The command is used to establish a stub network.

    E

    The subnet mask for the source address is 255.255.255.0


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    单选题
    Which command is used to copy the configuration from RAM into NVRAM？（）
    A

    copy running-config startup-config

    B

    copy startup-config: running-config

    C

    copy running config startup config

    D

    copy startup config running config

    E

    write terminal


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Which command will reinitialize the router and totally replace the running configuration with the current startup configuration?（）
    A

    TestKingB#reload

    B

    TestKingB# copy tftp startup-config

    C

    TestKingB# copy startup.-config running-config

    D

    TestKingB# copy running-config flash

    E

    TestKingB# setup


    正确答案： E
    解析： 暂无解析

  • 第13题：

    The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?()

    A. The default administrative distance is used.

    B. The command is used to establish a static route.

    C. The command is used to configure the router interfaces.

    D. The command is used to establish a stub network.

    E. The subnet mask for the source address is 255.255.255.0


    参考答案：A, B

  • 第14题：

    You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）

    • A、It is used to restart the router.
    • B、It is used to bypass the configuration in NVRAM.
    • C、It is used to enter ROM Monitor mode.
    • D、It is used to view the lost password.
    • E、It is used to save the changes to the configuration.

    正确答案:B

  • 第15题：

    Which command will reinitialize the router and totally replace the running configuration with the current startup configuration?（）

    • A、TestKingB#reload
    • B、TestKingB# copy tftp startup-config
    • C、TestKingB# copy startup.-config running-config
    • D、TestKingB# copy running-config flash
    • E、TestKingB# setup

    正确答案:A

  • 第16题：

    将路由器的RAM内running-configuration保存至NVRAM内startup-configuration 的命令是（）

    • A、copy running-config startup-config
    • B、copy startup-config running-config
    • C、write running-config startup-config
    • D、write  startup-config running-config

    正确答案:A

  • 第17题：

    Which command is used to copy the configuration from RAM into NVRAM?（）

    • A、copy running-config startup-config
    • B、copy startup-config: running-config
    • C、copy running config startup config
    • D、copy startup config running config
    • E、write terminal

    正确答案:A

  • 第18题：

    The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）

    • A、The default administrative distance is used.
    • B、The command is used to establish a static route.
    • C、The command is used to configure the router interfaces.
    • D、The command is used to establish a stub network.
    • E、The subnet mask for the source address is 255.255.255.0

    正确答案:A,B

  • 第19题：

    After editing to your device’s configuration, which command must you enter to activate the configuration changes?（）

    • A、set
    • B、copy candidate active
    • C、apply-config
    • D、commit

    正确答案:D

  • 第20题：

    单选题
    Which command is used to load a configuration from a TFTP server and merge the configuration into RAM？（）
    A

    copy running-config: TFTP:

    B

    copy TFTP: running-config

    C

    copy TFTP: startup-config

    D

    copy startup-config: TFTP:


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following is an accurate description of the command copy startup-configftp：//kevin：cisco@192.168.1.74？（）
    A

    The configuration on the FTP server is copied to RAM

    B

    The command is not valid on a Cisco router

    C

    The configuration file in RAM is copied to an FTP server

    D

    The configuration file in NVRAM is copied to an FTP server

    E

    The configuration on the FTP server is copied to NVRAM

    F

    The configuration will be copied from NVRAM to an FTP server with a filename of Kevin


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Which command is used to load a configuration from a TFTP server and merge the configuration into RAM?（）
    A

    copy running-config: TFTP

    B

    copy TFTP: running-config

    C

    copy TFTP: startup-config

    D

    copy startup-config: TFTP


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    After an unsuccessful synchronization or DARE update， which copy of the HACMP ODM remains  To prevent further changes from being made？（）
    A

     The ’Default’ configuration directory

    B

     The ’Active’ configuration directory

    C

     The ’Staging’ configuration directory

    D

     The ’Snapshot’ configuration directory


    正确答案： A
    解析： 暂无解析

相关内容