Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?()A. Voice needs to be assigned to the hardware priority queue.B. Voice needs to be assigned to the software priority queue.C. Call sig

题目
Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?()

A. Voice needs to be assigned to the hardware priority queue.

B. Voice needs to be assigned to the software priority queue.

C. Call signaling must have guaranteed bandwidth service.

D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.

E. At least 33 percent of the link bandwidth should be reserved for default best-effort class.

相似考题

1.Before deciding which form. of transport to use, a()will take into account the factors of cost, speed and safety.A、consignorB、consigneeC、shipperD、shipowner

2.Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?()A. State synchronization occurs only through the internal network interface card (NIC)B. Latency of the WAN must be less than 300 ms.C. Authenticating endpoints must be on the same LAN segment.D. Cluster members must use the same hardware platfor

3.Which two statements correctly describe a situation in which an Active／Standby Service Module design is being used?()A. Troubleshooting is more complicated.B. Service and switch modules are underutilized.C. Layer 2 adjacency is required with the servers that use this design.D. Layer 3 adjacency is required with the servers that use this design.E. Load balancing will always occur across both access layer uplinks.

4.When deciding the composition of the engineering watch, which may include____ appropriately, many factors shall be taken into account.A.satisfied engineersB.qualified ratingsC.satisfied chief engineerD.qualified chief' engineer

更多“Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?() ”相关问题

  • 第1题：

    When you decide on Campus QoS Design elements, which two statements correctly identify considerations to be taken into account?()

    A. Voice needs to be assigned to the hardware priority queue.

    B. Voice needs to be assigned to the software priority queue.

    C. Call signaling must have guaranteed bandwidth service.

    D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.


    参考答案：A, C

  • 第2题：

    Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）

    • A、It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.
    • B、It is optional if the Cisco WLC attached switch operates on a trust DSCP model.
    • C、It must be set if the Cisco WLC attached switch operates on a trust CoS model.
    • D、It sets the EDCF queue used for the radio-transmitted frames.

    正确答案:B,C

  • 第3题：

    Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?（）

    • A、Voice needs to be assigned to the hardware priority queue.
    • B、Voice needs to be assigned to the software priority queue.
    • C、Call signaling must have guaranteed bandwidth service.
    • D、Strict-priority queuing should be limited to 50 percent of the capacity of the link.
    • E、At least 33 percent of the link bandwidth should be reserved for default best-effort class.

    正确答案:A,C

  • 第4题：

    Which two statements correctly identify factors to consider when Configuring WAN QoS？（）

    • A、Voice Traffic uses Assured Forwarding
    • B、Voice Signaling traffic uses Assured Forwarding
    • C、Voice Signaling traffic uses priority queuing
    • D、Voice Traffic uses priority queuing
    • E、Voice signaling traffic should use priority queuing with Assured Forwarding

    正确答案:B,D

  • 第5题：

    Which two statements about the QoS functionality of the Cisco SDM are true？（）

    • A、the first step when using the SDM QoS wizard is to select the inbound interface on which the QoS policy must be applied
    • B、the SDM QoS wizard can be used to optimize LAN， WAN， and VPN interfaces
    • C、he SDM QoS wizard supports network-based application recognition （NBAR） to provide deep and stateful packet inspection
    • D、he SDM QoS wizard will apply custom queuing and priority queuing policies to the identified interfaces
    • E、he SDM QoS wizard will apply low latency-queuing，custom-queuing and priority-queuing policies to the identified interfaces
    • F、to create and manage the QoS settings， the user must select the QoS wizard task under the Monitor option

    正确答案:B,C

  • 第6题：

    Which two statements are true about record groups?（）

    • A、They are stored in the database. 
    • B、They are stored in local Forms memory. 
    • C、The type is specified explicitly at design time. 
    • D、The type is implied by when and how it is created.

    正确答案:B,D

  • 第7题：

    多选题
    Which two statements correctly identify considerations to take into account when deciding onCampus QoS Design elements？ （）
    A

    Voice needs to be assigned to the hardware priority queue

    B

    Voice needs to be assigned to the software priority queue

    C

    Call signaling must have guaranteed bandwidth service

    D

    Strict-priority queuing should be limited to 50 percent of the capacity of the link

    E

    At least 33 percent or the link bandwidth should be reserved tor default best effort class


    正确答案： A,B
    解析： 暂无解析

  • 第8题：

    多选题
    Refer to the exhibit. Which three statements are true about trust boundaries in the campus network？  （Choose three.）（）
    A

    A device is trusted if it correctly classifies packets.

    B

    A device is trusted if it correctly declassifies packets.

    C

    The outermost trusted devices represent the trust boundary.

    D

    Classification and marking occur using 802.1ab QoS bits before reaching the trust boundary.

    E

    Network trust boundaries are automatically configured in IOS version 12.3 and later.

    F

    For scalability， classification should be done as close to the edge as possible.


    正确答案： A,B
    解析： 暂无解析

  • 第9题：

    多选题
    Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）
    A

    State synchronization occurs only through the internal network interface card (NIC)

    B

    Latency of the WAN must be less than 300 ms.

    C

    Authenticating endpoints must be on the same LAN segment.

    D

    Cluster members must use the same hardware platfor


    正确答案： C,A
    解析： 暂无解析

  • 第10题：

    多选题
    Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）
    A

    It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.

    B

    It is optional if the Cisco WLC attached switch operates on a trust DSCP model.

    C

    It must be set if the Cisco WLC attached switch operates on a trust CoS model.

    D

    It sets the EDCF queue used for the radio-transmitted frames.


    正确答案： D,B
    解析： 暂无解析

  • 第11题：

    多选题
    When you decide on Campus QoS Design elements, which two statements correctly identify considerations to be taken into account?（）
    A

    Voice needs to be assigned to the hardware priority queue.

    B

    Voice needs to be assigned to the software priority queue.

    C

    Call signaling must have guaranteed bandwidth service.

    D

    Strict-priority queuing should be limited to 50 percent of the capacity of the link.


    正确答案： A,B
    解析： 暂无解析

  • 第12题：

    多选题
    As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design program. Which two of the following descriptions correctly identify its features? （）(Choose two.)
    A

    It strives to protect access to design documentation.

    B

    It facilitates customer deployments that are more predictable.

    C

    It facilitates customer deployments that are less reliable.

    D

    It incorporates products and technologies into a broad portfolio.


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design program. Which two of the following descriptions correctly identify its features? （）(Choose two.)

    • A、It strives to protect access to design documentation.
    • B、It facilitates customer deployments that are more predictable.
    • C、It facilitates customer deployments that are less reliable.
    • D、It incorporates products and technologies into a broad portfolio.

    正确答案:B,D

  • 第14题：

    Which of the following statements best describes a Pre-sales Solution Assurance Review？（）

    • A、An account team proposal review
    • B、An installation planning meeting
    • C、A solution design development methodology
    • D、A technical inspection of a completed solution design

    正确答案:D

  • 第15题：

    Which two statements correctly describe a situation in which an Active/Standby Service Module design is being used?（）

    • A、Troubleshooting is more complicated.
    • B、Service and switch modules are underutilized.
    • C、Layer 2 adjacency is required with the servers that use this design.
    • D、Layer 3 adjacency is required with the servers that use this design.
    • E、Load balancing will always occur across both access layer uplinks.

    正确答案:B,C

  • 第16题：

    You need to determine where the trust boundaries will be in a new Company VOIP design.  Which  two statements are true about these trust boundaries？（）

    • A、Trust boundaries are configured in the core of the network to provide the most efficient  forwarding based upon QoS markings，
    • B、Setting trust boundaries at the edge of the network allows intermediate hop devices to  administer QoS policies without detailed packet identification.
    • C、Trust boundaries are used to determine which QoS mechanism will be applied to the traffic.  
    • D、At the trust boundaries， the untrusted traffic will be marked with a new QoS value appropriate  for the policy in place at the point where the traffic entered the campus network.  
    • E、Trust boundaries define the firewall rules for QoS admission into a network.

    正确答案:B,D

  • 第17题：

    which one of the following database elements is not updated when the design task is run?（）

    • A、forms
    • B、views
    • C、roles
    • D、agents

    正确答案:C

  • 第18题：

    多选题
    Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?（）
    A

    Voice needs to be assigned to the hardware priority queue.

    B

    Voice needs to be assigned to the software priority queue.

    C

    Call signaling must have guaranteed bandwidth service.

    D

    Strict-priority queuing should be limited to 50 percent of the capacity of the link.

    E

    At least 33 percent of the link bandwidth should be reserved for default best-effort class.


    正确答案： D,E
    解析： 暂无解析

  • 第19题：

    单选题
    When deciding the composition of the engineering watch, which may include appropriately, many factors shall be taken into account（）.
    A

    satisfied engineers

    B

    qualified ratings

    C

    satisfied chief engineer

    D

    qualified chief engineer


    正确答案： B
    解析： 暂无解析

  • 第20题：

    多选题
    Which two code fragments correctly create and initialize a static array of int elements？（）
    A

    A

    B

    B

    C

    C

    D

    D


    正确答案： A,C
    解析： 暂无解析

  • 第21题：

    多选题
    Which two statements are true about record groups?（）
    A

    They are stored in the database.

    B

    They are stored in local Forms memory.

    C

    The type is specified explicitly at design time.

    D

    The type is implied by when and how it is created.


    正确答案： D,A
    解析： 暂无解析

  • 第22题：

    多选题
    When designing the IP routing for the Enterprise Campus network， which of these following twoiBGB considerations should be taken into account？（）
    A

    iBGB dual horning with different iSPs puts the Enterprise at the risk of becoming a transitnetwork

    B

    iBGP requires a full mesh of eBGP peers

    C

    Routers will not advertise iBGP learned routers to other iBGP peers.

    D

    The use of route reflections or Confederation eliminate any full mesh requirement while helpingto scale iBGP

    E

    iGBP peers do not add any information to the AS path


    正确答案： B,E
    解析： 暂无解析

  • 第23题：

    单选题
    Which of the following statements best describes a Pre-sales Solution Assurance Review？（）
    A

    An account team proposal review

    B

    An installation planning meeting

    C

    A solution design development methodology

    D

    A technical inspection of a completed solution design


    正确答案： D
    解析： 暂无解析

  • 第24题：

    多选题
    Which two statements correctly identify factors to consider when Configuring WAN QoS？（）
    A

    Voice Traffic uses Assured Forwarding

    B

    Voice Signaling traffic uses Assured Forwarding

    C

    Voice Signaling traffic uses priority queuing

    D

    Voice Traffic uses priority queuing

    E

    Voice signaling traffic should use priority queuing with Assured Forwarding


    正确答案： A,B
    解析： 暂无解析

相关内容