To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?()A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.B. The VTP management domain name of both switches mus

题目
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?()

A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.

B. The VTP management domain name of both switches must be set the same.

C. All ports on both the switches must be set as access ports.

D. One of the two switches must be configured as a VTP server.

E. A rollover cable is required to connect the two switches together.

F. A router must be used to forward VTP traffic between VLANs.

相似考题

1.What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.You need to configure two Ezonexam switches to exchange VLAN information. Which protocol provides a method of sharing VLAN configuration information between these two switches?A. STPB. 802.1QC. VLSMD. ISLE. VTPF. HSRPG. None of the above

3.What must an administrator do in order to successfully configure a VLAN trunk between two switches?()A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

4.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

更多“To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?() ”相关问题

  • 第1题：

    What is the purpose of the cisco Vlan Trunking protocol?()

    A. to provide a mechanism to dynamically assign vlan membership to switch ports

    B. to allow traffic to be carried from multiple vlans over a single link between switches

    C. to allow native vlan information to be carried over a trunk link

    D. to provide a mechanism to manually assign vlan membership to switch ports

    E. to allow for managing the additions,deletions,and changes of vlans between switchs


    参考答案：E

  • 第2题：

    You have a trunk link operating between two switches and you’re experiencing problems withframes leaking between the two VLANs. Each switch has identical modules， software revisionsand VLAN configuration information. Spanning tree protocol is disabled on all VLANs. What isprobably causing this problem？（）

    • A、The link is using IEEE 802.1Q protocol
    • B、The link is using IEEE 802.1E protocol
    • C、Spanning tree is disabled
    • D、Not enough information to determine
    • E、The native VLAN information is identical at each end of the link
    • F、The native VLAN information is different at each end of the link

    正确答案:A,F

  • 第3题：

    Which statements describe two of the benefits of VLAN Trunking Protocol?（）

    • A、VTP allows routing between VLANs.
    • B、VTP allows a single switch port to carry information to more than one VLAN.
    • C、VTP allows physically redundant links while preventing switching loops.
    • D、VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
    • E、VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
    • F、VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.

    正确答案:D,E

  • 第4题：

    In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）

    • A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.
    • B、The RPs must be within the same IGP domain.
    • C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.
    • D、The two anycast RPs must be IBGP peers.

    正确答案:C

  • 第5题：

    Which protocol provides a method of sharing VLAN configuration information between two Cisco switch？（）

    • A、VTP
    • B、802.1Q
    • C、RSTP
    • D、STP

    正确答案:A

  • 第6题：

    In order to configure two routers as anycast RPs，which of these requirements，at a minimum， must be satisfied？（）

    • A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.
    • B、The RPs must be within the same IGP domain.
    • C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.
    • D、The two anycast RPs must be IBGP peers.

    正确答案:C

  • 第7题：

    What is the purpose of the cisco Vlan Trunking protocol?（）

    • A、to provide a mechanism to dynamically assign vlan membership to switch ports
    • B、to allow traffic to be carried from multiple vlans over a single link between switches
    • C、to allow native vlan information to be carried over a trunk link
    • D、to provide a mechanism to manually assign vlan membership to switch ports
    • E、to allow for managing the additions,deletions,and changes of vlans between switchs

    正确答案:E

  • 第8题：

    单选题
    In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）
    A

    Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.

    B

    The RPs must be within the same IGP domain.

    C

    Multicast Source Discovery Protocol must be configured between the two anycast RPs.

    D

    The two anycast RPs must be IBGP peers.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）
    A

    The access link needs to be configured in multiple VLANs.

    B

    The link between the switches is configured in the wrong VLAN.

    C

    The link between the switches needs to be configured as a trunk.

    D

    VTP is not configured to carry VLAN information between the switches.

    E

    Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    正确答案： D
    解析： 暂无解析

  • 第10题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access ports.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： C,E
    解析： 暂无解析

  • 第11题：

    多选题
    Which statements describe two of the benefits of VLAN Trunking Protocol？（）
    A

    VTP allows routing between VLANs.

    B

    VTP allows a single switch port to carry information to more than one VLAN.

    C

    VTP allows physically redundant links while preventing switching loops.

    D

    VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.

    E

    VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.

    F

    VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.


    正确答案： F,A
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of the cisco Vlan Trunking protocol?（）
    A

    to provide a mechanism to dynamically assign vlan membership to switch ports

    B

    to allow traffic to be carried from multiple vlans over a single link between switches

    C

    to allow native vlan information to be carried over a trunk link

    D

    to provide a mechanism to manually assign vlan membership to switch ports

    E

    to allow for managing the additions,deletions,and changes of vlans between switchs


    正确答案： A
    解析： 暂无解析

  • 第13题：

    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）

    • A、A root VTP server
    • B、A trunk port
    • C、VTP priority
    • D、VLAN 1
    • E、None of the other alternatives apply

    正确答案:B,D

  • 第14题：

    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）

    • A、Set each end of the trunk line to IEEE 802.1Q encapsulation.
    • B、Set the same VTP management domain name on both switches.
    • C、Set all ports on the two switched as access ports.
    • D、Configure one of the two switches as a VTP server.
    • E、Connect the two switches using a rollover cable.
    • F、Use a router to forward VTP traffic between the VLANs.

    正确答案:B,D

  • 第15题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第16题：

    Which protocol provides a method of sharing VLAN configuration information between switches?（）

    • A、VTP
    • B、STP
    • C、ISL
    • D、802.1Q
    • E、VLSM

    正确答案:A

  • 第17题：

    Which two of the following steps are necessary to configure inter-VLAN routing between multilayer switches？（）

    • A、Configure a dynamic routing protocol.
    • B、Configure SVI interfaces with IP addresses and subnet masks.
    • C、Configure switch ports with network addresses.
    • D、Configure switch ports with the autostate exclude command.
    • E、Document the MAC addresses of the switch ports.

    正确答案:A,B

  • 第18题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第19题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）

    • A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
    • B、You must set the same VTP management domain name on both switches.
    • C、You must set all ports on the two switches as access ports.
    • D、You must configure one of the switches as a VTP server.
    • E、You must use a rollover cable to connect the two switches.

    正确答案:B,D

  • 第20题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第21题：

    多选题
    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）
    A

    Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B

    Set the same VTP management domain name on both switches.

    C

    Set all ports on the two switched as access ports.

    D

    Configure one of the two switches as a VTP server.

    E

    Connect the two switches using a rollover cable.

    F

    Use a router to forward VTP traffic between the VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第22题：

    单选题
    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the VLAN was added on all switches with the use of the show vlan command. 

    C

    Verify that the switch is configured to allow for trunking on the switch ports.

    D

    Verify that each switch port has the correct IP address space assigned to it for the new VLAN.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Which protocol provides a method of sharing VLAN configuration information between two Cisco switch?（）
    A

    VTP

    B

    802.1Q

    C

    RSTP

    D

    STP


    正确答案： B
    解析： 暂无解析

  • 第24题：

    多选题
    You have a trunk link operating between two switches and you’re experiencing problems withframes leaking between the two VLANs. Each switch has identical modules， software revisionsand VLAN configuration information. Spanning tree protocol is disabled on all VLANs. What isprobably causing this problem？（）
    A

    The link is using IEEE 802.1Q protocol

    B

    The link is using IEEE 802.1E protocol

    C

    Spanning tree is disabled

    D

    Not enough information to determine

    E

    The native VLAN information is identical at each end of the link

    F

    The native VLAN information is different at each end of the link


    正确答案： D,C
    解析： 暂无解析

相关内容