Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13. An 802. 1Q trunk is configured between the two switches. On CAT1, VLAN 10 is chosen as native, but on CAT2 the native VLAN is not specified.What will happen in this s

题目

Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13. An 802. 1Q trunk is configured between the two switches. On CAT1, VLAN 10 is chosen as native, but on CAT2 the native VLAN is not specified.What will happen in this scenario？（）

A.802.1Q giants frames could saturate the link

B.VLAN 10 on CAT1 and VLAN 1 on CAT2 will send untagged frames

C.A native VLAN mismatch error message will appear

D.VLAN 10 on CAT1 and VLAN 1 on CAT2 will send tagged frames.

相似考题

1.What must an administrator do in order to successfully configure a VLAN trunk between two switches?()A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing themto connect？（）A、 Cisco Express Catalyst 500 Series switchesB、 Cisco Catalyst 2900 Series switchesC、 Cisco Catalyst 3560 switchesD、 Cisco Catalyst 3700 Series switchesE、 Cisco Catalyst 4500 Series switchesF、 Cisco Catalyst 6500 Series switches

3. A Cisco 4404 WLAN controller is being connected to a Cisco 6500 Catalyst Series Switch. How would you interconnect and configure LAG for connectivity and ensure redundancy？（）A、All four ports from the Cisco WLC terminated to the same Catalyst gigabit module and channelgroup.B、Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 10 and CiscoWLC ports3 and 4 to Catalyst gigabit module slot 2 channel group 10.C、All four ports from the Cisco WLC terminated to the same Catalyst gigabit module using two channel groups.D、Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 20 and CiscoWLC ports 3 and 4 to Catalyst gigabit module slot 2 channel group 40.

4.Which statement about vlan operation on cisco catalyst switches is true?()A. when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table.B. unkown unicast frames are retransmitted only to the ports that belong to the same vlanC. ports between switches should be configured in access mode so that vlans can span across the portsD. broadcast and multicast frames are retransmitted to ports that are configured on different vlan.

更多“Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0／13. A ”相关问题

  • 第1题：

    What is the maximum number of Cisco Catalyst 3750 Series Switches that can be united into a single manageable unit using the Cisco StackWise technology?（）

    • A、9
    • B、3
    • C、12
    • D、6

    正确答案:A

  • 第2题：

    Which two statements best explain why the Cisco Catalyst 6500 Series of switches best fits in thecore area？ （）

    • A、 Cisco Catalyst 6500 Series offer a broad set of access capabilities.
    • B、 Cisco Catalyst 6500 Series eliminate network security threats.
    • C、 Cisco Catalyst 6500 Series handle high amounts of traffic flow.
    • D、 Cisco Catalyst 6500 Series aggregate data from the distribution-area switches.

    正确答案:C,D

  • 第3题：

    The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing them to connect multiple units？（）

    • A、 Cisco Express Catalyst 500 Series switches
    • B、 Cisco Catalyst 2900 Series switches
    • C、 Cisco Catalyst 3560 switches
    • D、 Cisco Catalyst 3700 Series switches
    • E、 Cisco Catalyst 4500 Series switches
    • F、 Cisco Catalyst 6500 Series switches

    正确答案:D

  • 第4题：

    Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13. An 802. 1Q trunk is configured between the two switches. On CAT1, VLAN 10 is chosen as native, but on CAT2 the native VLAN is not specified.What will happen in this scenario？（）

    • A、802.1Q giants frames could saturate the link
    • B、VLAN 10 on CAT1 and VLAN 1 on CAT2 will send untagged frames
    • C、A native VLAN mismatch error message will appear
    • D、VLAN 10 on CAT1 and VLAN 1 on CAT2 will send tagged frames.

    正确答案:C

  • 第5题：

    The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing them to connect？（）

    • A、 Cisco Express Catalyst 500 Series switches
    • B、 Cisco Catalyst 2900 Series switches
    • C、 Cisco Catalyst 3560 switches
    • D、 Cisco Catalyst 3700 Series switches
    • E、 Cisco Catalyst 4500 Series switches
    • F、 Cisco Catalyst 6500 Series switches

    正确答案:D

  • 第6题：

    Which Cisco Catalyst switches fit in the access area？（）

    • A、 Cisco Catalyst 2900 Series，Catalyst 7300 Series，and Catalyst 8000 Series
    • B、 Cisco Catalyst 2900 Series，Catalyst 3700 Series，and Catalyst Series
    • C、 Cisco Catalyst 2700 Series，Catalyst 7300 Series，and Catalyst 8000 Series
    • D、 Cisco Catalyst 2700 Series，Catalyst 3700 Series，and Catalyst4500 Series

    正确答案:B

  • 第7题：

    单选题
    A Cisco 4404 WLAN controller is being connected to a Cisco 6500 Catalyst Series Switch. How would you interconnect and configure LAG for connectivity and ensure redundancy？（）
    A

    All four ports from the Cisco WLC terminated to the same Catalyst gigabit module and channelgroup.

    B

    Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 10 and CiscoWLC ports3 and 4 to Catalyst gigabit module slot 2 channel group 10.

    C

    All four ports from the Cisco WLC terminated to the same Catalyst gigabit module using two channel groups.

    D

    Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 20 and CiscoWLC ports 3 and 4 to Catalyst gigabit module slot 2 channel group 40.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing themto connect？（）
    A

     Cisco Express Catalyst 500 Series switches

    B

     Cisco Catalyst 2900 Series switches

    C

     Cisco Catalyst 3560 switches

    D

     Cisco Catalyst 3700 Series switches

    E

     Cisco Catalyst 4500 Series switches

    F

     Cisco Catalyst 6500 Series switches


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    The following Cisco Catalyst Series switches fit in the access area. Which switches also utilize StackWise technology to address the needs of companies with growing networks by allowing them to connect？（）
    A

     Cisco Express Catalyst 500 Series switches

    B

     Cisco Catalyst 2900 Series switches

    C

     Cisco Catalyst 3560 switches

    D

     Cisco Catalyst 3700 Series switches

    E

     Cisco Catalyst 4500 Series switches

    F

     Cisco Catalyst 6500 Series switches


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    When you enter the interface command auto qos voip cisco-phone on a port at the edge of a network, how does the Cisco Catalyst switch detect if a Cisco IP Phone is connected to the port? （）
    A

    by snooping the CoS marking on the incoming frames

    B

    by using RTP hello messages between the switch port and the Cisco IP Phone

    C

    by using CDP

    D

    by using DHCP snooping

    E

    by snooping the incoming 802.1Q VLAN tag


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Which statement about vlan operation on cisco catalyst switches is true?（）
    A

    when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table

    B

    unkown unicast frames are retransmitted only to the ports that belong to the same vlan

    C

    ports between switches should be configured in access mode so that vlans can span across the ports

    D

    broadcast and multicast frames are retransmitted to ports that are configured on different vlan.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    多选题
    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）
    A

    Cisco Catalyst 2800

    B

    Cisco Catalyst 3550

    C

    Cisco Catalyst 3750

    D

    Cisco Catalyst 4500

    E

    Cisco Catalyst 6500


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    When you enter the interface command auto qos voip cisco-phone on a port at the edge of a network,how does the Cisco Catalyst switch detect if a Cisco IP Phone is connected to the port?（）

    • A、by snooping the CoS marking on the incoming frames
    • B、by using RTP hello messages between the switch port and the Cisco IP Phone
    • C、by using CDP
    • D、by using DHCP snooping
    • E、by snooping the incoming 802.1Q VLAN tag

    正确答案:C

  • 第14题：

    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）

    • A、 Cisco Catalyst 2800
    • B、 Cisco Catalyst 3550
    • C、 Cisco Catalyst 3750
    • D、 Cisco Catalyst 4500
    • E、 Cisco Catalyst 6500

    正确答案:D,E

  • 第15题：

    Which statement about vlan operation on cisco catalyst switches is true?（）

    • A、when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table.
    • B、unkown unicast frames are retransmitted only to the ports that belong to the same vlan
    • C、ports between switches should be configured in access mode so that vlans can span across the ports
    • D、broadcast and multicast frames are retransmitted to ports that are configured on different vlan.

    正确答案:B

  • 第16题：

    Which two of these Cisco Catalyst are distribution-area switches？ （）

    • A、 Catalyst 2800/E Series
    • B、 Catalyst 3750 Series
    • C、 Catalyst 3900/E Series
    • D、 Catalyst 4500/E Series
    • E、 Catalyst 6500/E Series

    正确答案:B,D

  • 第17题：

    A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch. How would you interconnect and configure lag for connectivity and ensure redundancy？（）

    • A、all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
    • B、ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
    • C、all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
    • D、ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.

    正确答案:B

  • 第18题：

    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）

    • A、STP root status
    • B、VTP mode
    • C、Negotiation status
    • D、Management domain
    • E、Configuration revision number

    正确答案:D,E

  • 第19题：

    单选题
    A Cisco 4404 WLAN controller is being connected to a Cisco 6500 Catalyst Series Switch. How would younterconnect and configure LAG for connectivity and ensure redundancy？（）
    A

    All four ports from the Cisco WLC terminated to the same Catalyst gigabit module and channel group.

    B

    All four ports from the Cisco WLC terminated to the same Catalyst gigabit module using two channel groups.

    C

    Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 20 and Cisco WLC ports3 and 4 to Catalyst gigabit module slot 2 channel group 40.

    D

    Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 10 and Cisco WLC ports3 and 4 to Catalyst gigabit module slot 2 channel group 10.


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13.An 802.1Q trunk is configured between the two switches.On CAT1，VLAN10 is chosen as native，but on CAT2 the native VLAN is not specified.What will happen in this scenario？（）
    A

    802.1Q giants frames could saturate the link.

    B

    VLAN10 on CAT1 and VLAN1 on CAT2 will send untagged frames.

    C

    A native VLAN mismatch error message will appear.

    D

    VLAN10 on CAT1 and VLAN1 on CAT2 will send tagged frames.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）
    A

    Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B

    Set the same VTP management domain name on both switches.

    C

    Set all ports on the two switched as access ports.

    D

    Configure one of the two switches as a VTP server.

    E

    Connect the two switches using a rollover cable.

    F

    Use a router to forward VTP traffic between the VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第22题：

    多选题
    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）
    A

    STP root status

    B

    VTP mode

    C

    Negotiation status

    D

    Management domain

    E

    Configuration revision number


    正确答案： A,C
    解析： 暂无解析

  • 第23题：

    单选题
    Which Cisco Catalyst switches fit in the access area？（）
    A

     Cisco Catalyst 2900 Series，Catalyst 7300 Series，and Catalyst 8000 Series

    B

     Cisco Catalyst 2900 Series，Catalyst 3700 Series，and Catalyst Series

    C

     Cisco Catalyst 2700 Series，Catalyst 7300 Series，and Catalyst 8000 Series

    D

     Cisco Catalyst 2700 Series，Catalyst 3700 Series，and Catalyst4500 Series


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    What is the maximum number of Cisco Catalyst 3750 Series Switches that can be united into a single manageable unit using the Cisco StackWise technology?（）
    A

    9

    B

    3

    C

    12

    D

    6


    正确答案： B
    解析： 暂无解析

相关内容