Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?()A.The address is removed from the pool until the conflict is resolved.B.The address remains in the pool until the conflict is resolved.C.Only the IP detected

题目
Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?()

A.The address is removed from the pool until the conflict is resolved.

B.The address remains in the pool until the conflict is resolved.

C.Only the IP detected by Gratuitous ARP is removed from the pool.

D.Only the IP detected by Ping is removed from the pool.

E.The IP will be shown, even after the conflict is resolved.

相似考题

1.在配置路由器上DHCP数据库代理时，取消地址冲突记录日志的命令是——。A．ip dhcp conflict loggingB．ip dhcp poolC．no ip dhcp conflict loggingD．dns—server address

2.An administrator is experiencing availability issues on a Linux server. The administrator decides tocheck the server for an IP address conflict on the server. Which of the following commands should the administrator use?（）A.tracerouteB.tracertC.ifconfigD.ipconfig

3.A computer configured to use DHCP cannot locate a DHCP server. Automatic Private IP Address(APIPA) will assign which of the following addresse?()A.172.16.1.25B.169.254.1.25C.10.16.1.25D.192.168.1.25

4.When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?()A. profileB. domain mapC. DHCP serverD. RADIUS server

更多“Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?() ”相关问题

  • 第1题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown? ()

    A. The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address 10.10.0.1.

    B. DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2.

    C. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP a ddress 10.0.0.1

    D. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address 10.0.0.6.

    E. Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router.


    参考答案：D, E

  • 第2题：

    Refer to the exhibit. Which statement is true about the configuration?()

    A. Hosts belonging to DHCP pool 1 and pool 2 will retain their IP settings for 30 hours before they must renew.

    B. Hosts will receive IP settings from pool 1 until the addresses run out, and then hosts will receive the settings from pool 2.

    C. Hosts in the 10.10.20.0/24 subnet will u se 10.10.20.50 as its DNS server.

    D. DHCP pool 0 needs to have the ip dhcp excluded - address command to exclude the default router and DNS servers.


    参考答案：C

  • 第3题：

    Refer to the exhibit. Which three statements correctly describe Network Device A?()

    A.With a network wide mask of 255.255.255.128, each interface does not require an IP address.

    B.With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.

    C.With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.

    D.With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.

    E.With a network wide mask of 255.255.254.0, each interface does not require an IP address.


    参考答案：B, D

  • 第4题：

    Which is the result of enabling IP Source Guard on an untrusted switch port that does not have DHCP snooping enabled？（）

    • A、DHCP requests will be switched in the software， which may result in lengthy response times.
    • B、The switch will run out of ACL hardware resources.
    • C、All DHCP requests will pass through the switch untested.
    • D、The DHCP server reply will be dropped and the client will not be able to obtain an IP address.

    正确答案:D

  • 第5题：

    When a DHCP server is configured, which two IP addresses should never be assignable to hosts? （）

    • A、network or subnetwork IP address
    • B、broadcast address on the network
    • C、IP address leased to the LAN
    • D、IP address used by the interfaces
    • E、manually assigned address to the clients
    • F、designated IP address to the DHCP server

    正确答案:A,B

  • 第6题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）

    • A、Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router
    • B、The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1
    • C、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1
    • D、DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2
    • E、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6

    正确答案:A,E

  • 第7题：

    Which two tasks does the Dynamic Host Configuration Protocol perform?（）

    • A、Set the IP gateway to be used by the network.
    • B、Perform host discovery used DHCPDISCOVER message.
    • C、Configure IP address parameters from DHCP server to a host.
    • D、Provide an easy management of layer 3 devices.
    • E、Monitor IP performance using the DHCP server.
    • F、Assign and renew IP address from the default pool.

    正确答案:C,F

  • 第8题：

    An administrator is experiencing availability issues on a Linux server. The administrator decides tocheck the server for an IP address conflict on the server. Which of the following commands should the administrator use?（）

    • A、traceroute
    • B、tracert
    • C、ifconfig
    • D、ipconfig

    正确答案:C

  • 第9题：

    ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）

    • A、Configure the IP address through the first client partition.
    • B、Configure the IP address through the ASMI menus.
    • C、Configure the POWER5 service processor for DHCP from the HMC DHCP server.
    • D、Configure the HMC to use the default IP address on the service processor when acquiring the managed server.

    正确答案:B

  • 第10题：

    单选题
    A new Aironet 1200 series AP has been installed in the Company WLAN.  What happens when this  device is connected to the LAN， with a default configuration？（）
    A

     The access point will attempt to download an encryption key from the nearest wireless server.

    B

     The access point makes several attempts to get an IP address from the DHCP server. If the  access point does not receive an address， it assigns itself the IP address 10.0.0.1 for 5 minutes.

    C

     The access point will attempt to connect to the nearest wireless server using LEAP  authentication.

    D

     The access point requests an IP address from the DHCP server. If the access point does not  receive an address， it continues to send requests indefinitely.

    E

     None of the other alternatives apply


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    When a DHCP server is configured, which two IP addresses should never be assignable to hosts?（）
    A

    network or subnetwork IP address

    B

    broadcast address on the network

    C

    IP address leased to the LAN

    D

    IP address used by the interfaces

    E

    manually assigned address to the clients

    F

    designated IP address to the DHCP server


    正确答案： C,F
    解析： 暂无解析

  • 第12题：

    多选题
    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）
    A

    Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router

    B

    The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1

    C

    The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1

    D

    DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2

    E

    The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6


    正确答案： B,E
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. Which statement is co rrect regarding the router configuration shown? ()

    A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands.

    B. The router will rebroadcast any UDP broadcasts received by this interface out to all interfaces included in the ip helper - address commands.

    C. The router will unicast any DHCP requests received by this interface out to all addresses included in the ip helper - address commands.

    D. This configuration will not do anything because the ip helper - address command needs to also be applied to the 192.168.23.1 IP address.


    参考答案：C

  • 第14题：

    When a DHCP server is configured, which two IP addresses should never be assignable to hosts?()

    A. network or subnetwork IP address

    B. broadcast address on the network

    C. IP address leased to the LAN

    D. IP address used by the interfaces

    E. manually assigned address to the clients

    F. designated IP address to the DHCP server


    参考答案：A, B

  • 第15题：

    Refer to the exhibit. The user at Workstation B reports that Server A cannot be reacheD.What ispreventing Workstation B from reaching Server A?()

    A.The IP address for Server A is a broadcast address.

    B.The IP address for Workstation B is a subnet address.

    C.The gateway for Workstation B is not on the same subnet.

    D.The gateway for Server A is not on the same subnet.


    参考答案：D

  • 第16题：

    Which statement is correct regarding the operation of DHCP?（）

    • A、A DHCP client uses a ping to detect address conflicts.(ARP)
    • B、A DHCP server uses a gratuitous ARP to detect DHCP clients.
    • C、A DHCP client uses a gratuitous ARP to detect a DHCP server.
    • D、If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
    • E、If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.
    • F、If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.

    正确答案:D

  • 第17题：

    A new Aironet 1200 series AP has been installed in the Company WLAN.  What happens when this  device is connected to the LAN， with a default configuration？（）

    • A、 The access point will attempt to download an encryption key from the nearest wireless server.
    • B、 The access point makes several attempts to get an IP address from the DHCP server. If the  access point does not receive an address， it assigns itself the IP address 10.0.0.1 for 5 minutes.
    • C、 The access point will attempt to connect to the nearest wireless server using LEAP  authentication.
    • D、 The access point requests an IP address from the DHCP server. If the access point does not  receive an address， it continues to send requests indefinitely.
    • E、 None of the other alternatives apply

    正确答案:D

  • 第18题：

    Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?（）

    • A、The address is removed from the pool until the conflict is resolved.
    • B、The address remains in the pool until the conflict is resolved.
    • C、Only the IP detected by Gratuitous ARP is removed from the pool.
    • D、Only the IP detected by Ping is removed from the pool.
    • E、The IP will be shown, even after the conflict is resolved.

    正确答案:A

  • 第19题：

    A computer configured to use DHCP cannot locate a DHCP server. Automatic Private IP Address(APIPA) will assign which of the following addresse？（）

    • A、172.16.1.25
    • B、169.254.1.25
    • C、10.16.1.25
    • D、192.168.1.25

    正确答案:B

  • 第20题：

    A system administrator needs to specify a set of FQDN to IP address mappings for a legacyserver； the administrator does not want the legacy server to be referenced by other servers. Which of the following should the administrator use to set this？（）

    • A、DHCP server
    • B、DNS server
    • C、Host file
    • D、Route statements

    正确答案:C

  • 第21题：

    When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?（）

    • A、profile
    • B、domain map
    • C、DHCP server
    • D、RADIUS server

    正确答案:B

  • 第22题：

    单选题
    Which statement is correct regarding the operation of DHCP?（）
    A

    A DHCP client uses a ping to detect address conflicts.

    B

    A DHCP server uses a gratuitous ARP to detect DHCP clients.

    C

    A DHCP client uses a gratuitous ARP to detect a DHCP server.

    D

    If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.

    E

    If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.

    F

    If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A computer configured to use DHCP cannot locate a DHCP server. Automatic Private IP Address(APIPA) will assign which of the following addresse？（）
    A

    172.16.1.25

    B

    169.254.1.25

    C

    10.16.1.25

    D

    192.168.1.25


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    Refer to the exhibit. Which of the following IOS DHCP configuration statements is required so that a Cisco skinny-based IP phone can connect with CallManager?（）
    A

    ip dhcp pool Client

    B

    network 10.1.1.0 255.255.255.240

    C

    default-router 10.1.1.1

    D

    dns-server 10.2.2.2

    E

    domain-name cisco.com

    F

    option 150 ip 10.3.3.3


    正确答案： B
    解析： 暂无解析

相关内容