Which name describes an IPV6 host－enable tunneling technique that uses IPV4 UDP,does not require dedicated gateway tunnels,and can pass through existing IPV4 NAT gateways?()A.dual stackB.dynamicC.TeredoD.Manual 6to4

题目
Which name describes an IPV6 host－enable tunneling technique that uses IPV4 UDP,does not require dedicated gateway tunnels,and can pass through existing IPV4 NAT gateways?()

A.dual stack

B.dynamic

C.Teredo

D.Manual 6to4

相似考题

1.A client host uses IPv4 to communicate with one ser ver and IPv6 to communicate with another.Which of the following IPv6 coexistence features is likely at work on the host?()A. Native IPv6B. Point - to -point tunnelsC. Multipoint tunnelsD. NAT - PTE. Dual stacks

2.Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? ()A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

3.Which three approaches can be used while migrating from an IPV4 addressing scheme to an IPV6 scheme.()A. statically map IPV4 address to IPV6 addressesB. configuration IPv4 tunnels between IPV6 islandsC. use DHCPv6 to map IPV4 addresses to IPV6 addressesD. use proxying and translation to translate IPV6 packets into IPV4 packetsE. configure IPV6 directlyF. enable dual-stack routing

4.Which statement describes the difference between a manually configured IPv6 in IPv4 tunnel versus an automatic 6to4 tunnel?()A. An automatic 6to4 tunnel does not req uire dual - stack (IPv4 and IPv6) routers at the tunnel endpoints.B. An automatic 6to4 tunnel allows multiple IPv4 destinations.C. A manually configured IPv6 in IPv4 tunnel allows multiple IPv4 destinations.D. A manually configured IPv6 in IPv4 tunnel does not require dual- stack (IPv4 and IPv6) routers at the tunnel endpoints.

更多“Which name describes an IPV6 host－enable tunneling technique that uses IPV4 UDP,does not require dedicated gateway tunnels,and can pass through existing IPV4 NAT gateways?() ”相关问题

  • 第1题：

    Which term describes the process of encapsulating IPv6 packets inside IPv4 packets?()

    A.tunneling

    B.hashing

    C.routing

    D.NAT


    参考答案：A

  • 第2题：

    Which term describes the process of encapsulating IPv6 packets inside IPv4 packets?（）

    • A、tunneling
    • B、hashing
    • C、routing
    • D、NAT

    正确答案:A

  • 第3题：

    运营商级NAT（NAT444）的主要功能是（）。

    • A、提供安全保障
    • B、提供IPv4到IPv4的地址转换
    • C、提供IPv4到IPv6的协议转换
    • D、提供IPv6到IPv6的转换

    正确答案:B

  • 第4题：

    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）

    • A、 Tunnel IPv6 over IPv4 to connect far-end IPv6 networks
    • B、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible
    • C、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible
    • D、 What is the meaning of EUI-64 and how does it work？
    • E、 Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.

    正确答案:A,C,D

  • 第5题：

    Which three approaches can be used while migrating from an IPV4 addressing scheme to an IPV6 scheme?（）

    • A、statically map IPV4 address to IPV6 addresses
    • B、configuration IPv4 tunnels between IPV6 islands
    • C、use DHCPv6 to map IPV4 addresses to IPV6 addresses
    • D、use proxying and translation to translate IPV6 packets into IPV4 packets
    • E、configure IPV6 directly
    • F、enable dual-stack routing

    正确答案:A,B,F

  • 第6题：

    Which two statements about DS-Lite are true？（）

    • A、IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.
    • B、Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.
    • C、The LSN performs NAT44 on private IPv4 source addresses.
    • D、DS-Lite does not perform any address translation.

    正确答案:A,C

  • 第7题：

    多选题
    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
    A

    IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B

    IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C

    Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.

    D

    Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E

    IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    正确答案： C,A
    解析： 暂无解析

  • 第8题：

    多选题
    In IPv6 network, an IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across the existing IPv4 infrastructurE. There are currently fiv e IPv6 overlay tunnel types. Which three IPv6 overlay tunnel statements are true？（）
    A

    Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.

    B

    An manual overlay tunnel supports point - to - multipo int tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.

    C

    Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.

    D

    Overlay tunnels can be configured between border route rs or between a border router and a host capable of supporting IPv4 and IPv6.

    E

    Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4 - compatible, 6to4, and Intra - Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechan isms.

    F

    Cisco IOS supports manual, generic routing encapsulation (GRE), IPv6 - compatible, 4to6, and Multiprotocol Label Switching (MPLS) overlay tunneling mechanisms.


    正确答案： F,B
    解析： 暂无解析

  • 第9题：

    多选题
    The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）
    A

    telnet access does not require a password

    B

    nat

    C

    no broadcast

    D

    chanage of destination address in the ipv6 header

    E

    chanage of source address in the ipv6 header

    F

    autoconfiguration


    正确答案： D,B
    解析： 暂无解析

  • 第10题：

    多选题
    Which three approaches can be used while migrating from an IPV4 addressing scheme to an IPV6 scheme？（）
    A

    statically map IPV4 address to IPV6 addresses

    B

    configuration IPv4 tunnels between IPV6 islands

    C

    use DHCPv6 to map IPV4 addresses to IPV6 addresses

    D

    use proxying and translation to translate IPV6 packets into IPV4 packets

    E

    configure IPV6 directly

    F

    enable dual-stack routing


    正确答案： D,B
    解析： 暂无解析

  • 第11题：

    多选题
    Which two tunneling techniques in IPv6 do not require an IPv4 tunnel destination in the configuration？（）
    A

    6to4

    B

    6over4

    C

    ISATAP

    D

    GRE


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）

    • A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
    • B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
    • C、Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.
    • D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
    • E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

    正确答案:A,C

  • 第13题：

    Which statement describes the difference between a manually configured IPv6 in IPv4 tunnel versus an automatic 6to4 tunnel?（）

    • A、An automatic 6to4 tunnel does not req uire dual - stack (IPv4 and IPv6) routers at the tunnel endpoints.
    • B、An automatic 6to4 tunnel allows multiple IPv4 destinations.
    • C、A manually configured IPv6 in IPv4 tunnel allows multiple IPv4 destinations.
    • D、A manually configured IPv6 in IPv4 tunnel does not require dual- stack (IPv4 and IPv6) routers at the tunnel endpoints.

    正确答案:B

  • 第14题：

    the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?（）

    • A、telnet access does not require a password
    • B、nat
    • C、no broadcast
    • D、chanage of destination address in the ipv6 header
    • E、chanage of source address in the ipv6 header
    • F、autoconfiguration

    正确答案:C,F

  • 第15题：

    Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）

    • A、Only OSPF version 3 can be utilized for routing IPv4 and IPv6
    • B、IPv4 and IPv6 networks can be routed simultaneously
    • C、IPv6 can be routed using the same routing protocol versions as IPv4
    • D、A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them
    • E、None of the other alternatives apply

    正确答案:B

  • 第16题：

    A client host uses IPv4 to communicate with one ser ver and IPv6 to communicate with another.Which of the following IPv6 coexistence features is likely at work on the host?（）

    • A、Native IPv6
    • B、Point - to -point tunnels
    • C、Multipoint tunnels
    • D、NAT - PT
    • E、Dual stacks

    正确答案:E

  • 第17题：

    多选题
    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： C,D
    解析： 暂无解析

  • 第18题：

    单选题
    Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）
    A

    Only OSPF version 3 can be utilized for routing IPv4 and IPv6

    B

    IPv4 and IPv6 networks can be routed simultaneously

    C

    IPv6 can be routed using the same routing protocol versions as IPv4

    D

    A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them

    E

    None of the other alternatives apply


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Which name describes an IPV6 host-enable tunneling technique that uses IPV4 UDP,does not require dedicated gateway tunnels,and can pass through existing IPV4 NAT gateways?（）
    A

    dual stack

    B

    dynamic

    C

    Teredo

    D

    Manual 6to4


    正确答案： D
    解析： 暂无解析

  • 第20题：

    多选题
    Which two statements about DS-Lite are true？（）
    A

    IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.

    B

    Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.

    C

    The LSN performs NAT44 on private IPv4 source addresses.

    D

    DS-Lite does not perform any address translation.


    正确答案： B,A
    解析： 暂无解析

  • 第21题：

    单选题
    运营商级NAT（NAT444）的主要功能是（）。
    A

    提供安全保障

    B

    提供IPv4到IPv4的地址转换

    C

    提供IPv4到IPv6的协议转换

    D

    提供IPv6到IPv6的转换


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Which term describes the process of encapsulating IPv6 packets inside IPv4 packets?（）
    A

    tunneling

    B

    hashing

    C

    routing

    D

    NAT


    正确答案： A
    解析： 暂无解析

相关内容