Which of the listed problems could produce a high absolute pressure within a flash type evaporator?
A.production of high salinity distillate
B.seawater feed temperature below 165℃
C.a leak in the first stage demister
D.a cracked distillate pump vent line
第1题:
Which of the following printing technologies uses piezoelectric pressure pads to produce smallbubbles that are moved to the paper?()
第2题:
Proper refrigerant charge
Faulty expansion valve
Insufficient refrigerant
Solenoid valve stuck open
第3题:
Improper fuel rack positioning
Lengthy opening of the exhaust valve
Excessively early injection timing
Extended light load operation
第4题:
lower condensing
higher cooling
lower cooling
higher condensing
第5题:
clogged air filter
compression stroke
burned exhaust valves
all of the above
第6题:
Production of high salinity distillate
Seawater feed temperature below 165℃
A leak in the first stage demister
A cracked distillate pump vent line
第7题:
Transducer
Reducer
Transformer
Rectifier
第8题:
air bottle
air compressor
crank case
combustion chamber
第9题:
higher than the first stage feed-water temperature and absolute shell pressure
lower than the first stage feed-water temperature and absolute shell pressure
the same as the first stage feed-water temperature and absolute shell pressure
not related to the feed-water temperature and absolute shell pressure
第10题:
Gravity siphon effect
Higher vacuum in the second-stage
Difference in brine density between first and second stages
lower pressure in first-stage
第11题:
evaporation is accomplished in a vacuum
due to the higher temperature of the incoming feed
due to the latent heat of evaporation principle
evaporation in a submerged medium produces more distillate
第12题:
Thermal expansion valve frozen open
Suction gas heat exchanger bypassed
Condenser clogged or fouled
High pressure cutout switch inoperative
第13题:
Pressure-reducing valve
Unloading valve
Counterbalance valve
Pressure-relief valve
第14题:
cold fuel oil
low fuel oil pressure
low atomizing steam pressure
water in the fuel oil
第15题:
Worn intake valve guides
Pitted pre-combustion chambers
Loose valve tappets
High exhaust back pressure
第16题:
starters
pressure switches
pressure
water
第17题:
Hydraulic oil
Lubricating oil
Diesel oil
Refrigeration oil
第18题:
A shortage of liquid refrigerant
Excessive frost on the evaporator
Excessive condenser cooling water
Insufficient condenser cooling water flow
第19题:
lowering brine discharge density
decreasing the absolute pressure of each stage
increasing the saltwater feed heater temperature
increasing the pressure at the spray pipe
第20题:
Loss of engine power and high exhaust temperatures
Higher than normal firing pressure and low exhaust temperatures
High fuel consumption and high exhaust temperatures
Lower than normal compression pressure and high exhaust temperature
第21题:
CO2
Methyl chloride
R-22
Sulphur dioxide
第22题:
high-pressure steam-driven air-ejector
motor-driven vacuum pump
water-motivated air eductor
centrifuge pump
第23题:
The condenser and the expansion valve
The king valve and the solenoid valve
The compressor and the expansion valve
The condenser and the solenoid valve