How does foam extinguish an oil fire ?______.
A.By cooling the oil below the ignition temperature
B.By removing the fuel souce from the fire
C.By excluding the oxygen from the fire
D.By increasing the weight of the oil
第1题:
A foam-type portable fire extinguisher is most useful in fighting a fire in ______.
A.generators
B.oil drums
C.the bridge controls
D.combustible metals
第2题:
As an extinguishing agent, foam ______.
A.conducts electricity
B.should be directed at the base of the fire
C.is most efffective on buring gases which are flowing
D.extinguishes by cooling oil fires below ignition temperature
第3题:
Never extinguish oil and electrical fires with ().
第4题:
cutting off supply of oxygen
removing the fuel
cooling below the ignition temperature
spraying with water
第5题:
It is effective in controlling fire in flowing oil such as coming from a broken fuel line
It absorbs heat from materials that could cause reignition
Most foams can be used jointly with dry chemical extinguishing agents to attack a fire by two methods of extinguishment
Once the surface is blanketed with foam and the fire is extinguished,no further foam is required
第6题:
conducts electricity
should be directed at the base of the fire
is most effective on burning gases which are flowing
extinguishes by cooling oil fires below ignition temperature
第7题:
remove oxygen from the area
cool fuel below ignition temperature
smother with CO2
smother fire with foam
第8题:
The oil temperature is less than the cooling water temperature
The oil pressure is less than the cooling water pressure
The oil pressure is greater than the cooling water pressure
The oil flow control valve is always installed in the oil input line
第9题:
air from contacting the oil vapors
permitting re-ignition boiling of the heated oil
spontaneous combustion below the oil surface
toxic fumes from escaping to the surface
第10题:
shutting off the air supply
cooling the fuel to below ignition temperature
dispersing the fuel
removing the source of ignition
第11题:
cannot be made with salt water
is heavierthan oil and sinks below its surface
is corrosive and to fire fighters
conducts electricity
第12题:
is effective if used promptly on an oil fire
has a greater cooling effect than water
is lighter than air
is harmless to cargo and crew
第13题:
A portable foam (stored-pressure type) fire extinguisher would be most useful in combating a fire in ______.
A.generators
B.oil drums
C.the bridge controls
D.combustible metals
第14题:
Foam extinguishes a fire by ______.
A.shutting off the air supply
B.cooling the fuel to below ignition temperature
C.dispersing the fuel
D.removing the source of ignition
第15题:
By cooling the oil below the ignition temperature
By removing the fuel source from the fire
By excluding the oxygen from the fire
By increasing the weight of the oil
第16题:
a dirty lube oil strainer
internal water leaks
an oil suction line restriction
excessive wears of the cooling water pump
第17题:
secure all openings to the tank
discharge an initial charge of CO2 with a hand portable extinguisher
direct a fire hose into the tank and energize the fire main
spray the tank boundaries with a fire hose to promote cooling
第18题:
couducts electricity
should be directed at the base of the fire
is most effective on burning gases which are flowing
extinguishes by cooling oil fires blow ignition temperature
第19题:
cutting off the supply of oxygen
removing the fuel
cooling below the ignition temperature
spraying with water
第20题:
decrease in ignition lag
increase in fuel economy
reduction in lube oil viscosity
increase in cylinder misfiring
第21题:
camshaft seizure
lube oil pump failure
lube oil cooler failure
lube oil pump overflow
第22题:
pre-injection fuel oil treatment
lube oil filtration
lube oil purification
piston cooling
第23题:
wash down the area immediately with a fire hose
wash down the area with kerosene
cover the area with absorbent material
cover the area with foam