As an extinguishing agent, foam ______.
A.conducts electricity
B.should be directed at the base of the fire
C.is most efffective on buring gases which are flowing
D.extinguishes by cooling oil fires below ignition temperature
第1题:
Generally, the first action in extinguishing an LFG fire caused by escaping gas is to ______.
A.sweep flames away with water spray
B.shut off the leak
C.use a chemical foam fire extinguisher
D.call the local fire department
第2题:
Alcohol foam
Dry chemical
Chemical foam
Water fog
第3题:
preventing oxygen from reaching the burning material
cooling the burning material below its ignition temperature
using the extinguishing agent to make the burning material fire-resistant
using the extinguishing agent to absorb the heat
第4题:
Class A and class B
Class B and class C
Class A and class C
Class C, class D, and class E
第5题:
sweep flames away with water spray
shut off the leak
use a chemical foam fire extinguisher
call t e local fire department
第6题:
Foam
CO2
Dry chemical
Water fog
第7题:
conducts electricity
should be directed at the base of the fire
is most effective on burning gases which are flowing
extinguishes by cooling oil fires below ignition temperature
第8题:
Foam
Carbon dioxide
Dry chemical
Water fog
第9题:
Weight
Temperature
Electrical nonconductivity
Cost
第10题:
carbon dioxide
Halon 1301
dry chemical
water fog
第11题:
sweep flames away with water spray
shut off the leak
use a chemical foam fire extinguisher
call the local fire department
第12题:
it provides cooling as a secondary effect
works well on extinguishing electrical fires
can be used to combat combustible metal fires
All of the above
第13题:
increases the size of foam bubbles formed
increases the rate of foam production
improves the extinguishing properties of foam
gives the nozzleman more freedom of movement,since it can be placed anywhere in the hose line
第14题:
acrylic acid
benzene
oleum
vinyl toluene
第15题:
It is effective in controlling fire in flowing oil such as coming from a broken fuel line
It absorbs heat from materials that could cause reignition
Most foams can be used jointly with dry chemical extinguishing agents to attack a fire by two methods of extinguishment
Once the surface is blanketed with foam and the fire is extinguished,no further foam is required
第16题:
Foam conducts electricity
To be most effective,foam should be directed at the base of the fire
Foam is most effective on burning liquids which are flowing
Foam can ONLY be used to extinguish class A fires
第17题:
will remove all the toxic fumes from the air
has the greatest cooling ability
will leave no harmful residue
completely removes combustible vapors from the air
第18题:
Water foam
Dry chemical powder
Water fog
Alcohol foam
第19题:
Water stream
Water fog or apray
Steam
Dry chemical
第20题:
remove oxygen from the area
cool fuel below ignition temperature
smother with CO2
smother fire with foam
第21题:
The agent is considered nontoxic at room temperature in low concentrations
The agent is less effective than carbon dioxide
Halon primarily extinguishes the fire by cooling
The agent cannot be used on electrical fires because it leaves a residue
第22题:
cannot be made with salt water
is heavierthan oil and sinks below its surface
is corrosive and to fire fighters
conducts electricity
第23题:
coaming
alarm
drain
fire sensor