The 4X CD-ROM drive has dirty optics or laser and requires cleaning.
The 4X CD-ROM drive needs to be jumpered to support CD-RW disks.
The 4X CD-ROM drive does not support the multi-read specification.
The 4X CD-ROM is fine, but the CD-RW disk has a flaw in its format.
第1题:
A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?()
第2题:
As a Company employee you are the desktop administrator of a Windows 2000 Professional computer. The Windows 2000 Professional computer has 25 MB of free disk space drive C and 800 MB of free disks pace on drive E. You are unable to print large documents because if inadequate disk space on drive C. You want to be able to use the space on drive E to print large documents. What should you do? ()
第3题:
The error ’invalid boot disk’ means:()
第4题:
A customer has a storage requirement for a mixed IBM System p and System z environment. They require approximately 2 TB of high performance disk for their System z environment. They require approximately 25 TB of low-performance disk for their System p environment. The storage specialist is using Capacity Magic to configure an IBM System Storage DS8300. Which configuration is most appropriate for this customer()
第5题:
A customer with three Windows servers wants to create a shared storage array. One server runs a200 GB Oracle database with high transaction rates. The second server is a file server with 3 TBof data and the third server is a mail server with 150 GB of storage. The key customer decisionmaker has only purchased EMC CX storage products in his previous employment. Cost is a keyconsideration. From the following which is a key feature that could convince the customer topurchase a DS3500 over an EMC CX storage system?()
第6题:
You are the desktop administrator for your company. All employees have Windows XP Professional computers. All employees are members of the local Users group on their own computers. A user in the graphics department has a removable disk cartridge drive on his computer. The disk cartridge contains an unsupported, third-party file system. When he tries to save data to the disk cartridge, the user is prompted to reformat the disk cartridge. However, he receives an “access denied” error message when attempting to reformat. You need to enable the user to save data to the disk cartridge. What should you do?()
第7题:
You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create anew NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive. What should you do?()
第8题:
Reboot the computer
Remove the drive and reinstall
Install the device driver
Flash the BIOS
第9题:
Two disk drive sets of 300 GB drives
Four disk drive sets of 146 GB drives
Eight disk drive sets of 73 GB drives
Nine disk drive sets of 146 GB drives
第10题:
Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
第11题:
Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.
Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.
Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.
Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
第12题:
Use lquerypv to read the drive
Use lspv and look at PP Size value
Look on the outside of the drive itself
Use bootinfo to find the LTG on the drive
第13题:
A customer needs 2 TB of high availability storage for eBusiness applications. Their servers arecurrently connected to two EMC Symmetrix subsystems that are running RAID 1. They want toconsolidate all of the RAID 1 storage into an IBM System Storage DS6800. Which configurationsatisfies these capacity requirements?()
第14题:
A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?()
第15题:
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?()
第16题:
Companycom has just added some new disk drives to a p5 590. The customer needs to know the largest Logical Track Group that these drives will support. What is the best way to locate this information?()
第17题:
You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?()
第18题:
You are a network administrator for ExamSheet.net's Windows 2000 network. A user named Sandra has a Windows 2000 Professional computer with a single hard disk with two partitions configured as drive C and D. A pagefile has been configured on Drive C:. Sandra reports that applications on her Windows 2000 Professional computer are running slowly. You notice that Sandra's computer has 64 MB of RAM. Her hard drive contains 70 MB of free disk space on drive C and 160 MB of free disk space on drive D.You want to improve the performance of Sandra's computer. What should you do?()
第19题:
the BIOS settings are incorrect.
there is no floppy disk in the drive.
the computer was unable to make temporary space for the boot process.
the computer was unable to find the information needed to start the boot process.
第20题:
Optical drive
Power supply
CMOS battery
CD-ROM disk
第21题:
4 x 73 GB 15k rpm disk drive sets for System z; and 4 x 500 GB 7.2k rpm disk drive sets for System p
4 x 146 GB 15k rpm disk drive sets for System z; and 2 x 500 GB 7.2k rpm disk drive sets for System p
2 x 300 GB 10k rpm disk drive sets for System z; and 4 x 300 GB 10k rpm disk drive sets for System p
2 x 73 GB 15k rpm disk drive sets for System z; and 2 x 500 GB 7.2k rpm disk drive sets for System p
第22题:
SATA and SAS 2.0 disk drive technology can be mixed in different enclosures
nearline SAS 2.0 and SAS 2.0 disk drive technology can be mixed in the same enclosure
SATA disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution
SAS 2.0 disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution
第23题:
Instruct the user to format the cartridge as FAT32.
Remove the Read-only attribute from the disk cartridge.
Add the user to the Power Users local group on the computer.
Grant the user Allow - Full Control permission on the disk cartridge.
Configure the local security settings to allow the user to format and eject removable media.