单选题An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）A The CD is defective.B The CD is not bootable.C The CD-ROM d

题目
单选题
An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）
A

The CD is defective.

B

The CD is not bootable.

C

The CD-ROM drive is defective.

D

The Boot Sequence is not set in the BIOS to boot first from the CD

相似考题

1.You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".You are unable to perform. the upgrade. What should you do to resolve the problem?A．Convert the system partition to NTFS.B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

2. A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）A、Replace the video card with a compatible one.B、Check the Windows XP Hardware Compatibility List.C、Verify the boot order in the BIOS.D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.

3.A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）A、Optical driveB、Power supplyC、CMOS batteryD、CD-ROM disk

4. everal people in an finance customer IT department are asking for fileset updates that the  system administrator received from IBM earlier that day on CD-ROM. The system administrator created an install directory on their machine and made it available to everyone.  Which of the following commands will allow the system administrator to copy the images from an IBM update CD-ROM to the install directory（）A、"smit bffcreate" from the target directoryB、"tar -xvf /dev/cd0" from the target directoryC、"restore -xvqf /dev/cd0" from the target directoryD、mount the cdrom on /cdrom and run "cp /cdrom/* ." from the target directory

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）A The CD is defective.B The CD is not bootable.C The CD-ROM d”相关问题

  • 第1题：

    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）

    • A、The driver CD is for Windows XP only.
    • B、The technician needs to initialize the NIC first within Device Manager before installing a driver.
    • C、The driver on the CD is not digitally signed.
    • D、The driver is corrupt.

    正确答案:A

  • 第2题：

    A Windows XP system locks up after the GUI starts to load. The system will start in Safe Mode. TheEvent Viewer reports that a driver failed to load. Which of the following methods would help diagnose the problem? （）

    • A、Enable boot logging. In Safe Mode, read the ntbtlog.txt file.
    • B、In Safe Mode, run the sigverif utility.
    • C、Restart the system from the OEM recovery CD; do a full restore.
    • D、In Safe Mode, run the driverquery utility.

    正确答案:A

  • 第3题：

    A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）

    • A、The adapter must be taken offline prior to the firmware update
    • B、The adapter must be assigned to the service partition prior to the firmware update
    • C、The system has not been rebooted since the adapter was added to the Logical Partition
    • D、The adapter must be dynamically removed from the Logical Partition prior to the firmware update

    正确答案:A

  • 第4题：

    An administrator issued a command to update thefirmware of an Ethernet adapter on a partitioned system, but received an error. What is the most likely cause of the problem?（）

    • A、The adapter must be taken offline prior to the firmware update.
    • B、The system has not been rebooted since the adapter was added to the LPAR.
    • C、The adapter must be assigned to the service partition prior to updating the firmware.
    • D、The adapter must be dynamically removed from the LPAR prior to updating thefirmware.

    正确答案:A

  • 第5题：

    A system administrator wants to perform some system maintenance. The AIX installation CD is in the CDROM drive， however the system will not boot from the CD. Which command will assist in determining if the CDROM drive is currently a bootable device？（）

    • A、lscfg -l cd0 -v
    • B、bootlist -m service -o
    • C、bosboot -a -d /dev/cd0
    • D、chdev -l cd0 -a boot=yes

    正确答案:B

  • 第6题：

    An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）

    • A、The CD is defective.
    • B、The CD is not bootable.
    • C、The CD-ROM drive is defective.
    • D、The Boot Sequence is not set in the BIOS to boot first from the CD

    正确答案:D

  • 第7题：

    单选题
    everal people in an finance customer IT department are asking for fileset updates that the  system administrator received from IBM earlier that day on CD-ROM. The system administrator created an install directory on their machine and made it available to everyone.  Which of the following commands will allow the system administrator to copy the images from an IBM update CD-ROM to the install directory（）
    A

    smit bffcreate from the target directory

    B

    tar -xvf /dev/cd0 from the target directory

    C

    restore -xvqf /dev/cd0 from the target directory

    D

    mount the cdrom on /cdrom and run cp /cdrom/* . from the target directory


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    The staff is not able to access a database server.  The server has an ’Operating System not found’error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem？（）
    A

    The SAN is offline

    B

    Fiber channel switch

    C

    Multiple failed drives in the SAN

    D

    HBA


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）
    A

    Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.

    B

    Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 

    C

    Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 

    D

    Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A defective CD-ROM drive is replaced with a new CD-ROM drive. The new CD-ROM drive is able to read any CD that it accesses， but music CDs do not play music. What is the MOST likely cause of this problem？（）
    A

    The audio cable is not connected to the drive.

    B

    The ribbon cable is not connected.

    C

    The power cable is not connected.

    D

    The CD-ROM drivers are not installed.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
    A

    The profile data was not initialized after restoring the backup CD

    B

    The profile data was not backed up before doing the Critical Console Data backup

    C

    A Critical Console Data backup was performed which backs up user data， but not profile data

    D

    A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A system administrator wants to perform some system maintenance. The AIX installation CD is in the CDROM drive， however the system will not boot from the CD. Which command will assist in determining if the CDROM drive is currently a bootable device？（）
    A

    lscfg -l cd0 -v

    B

    bootlist -m service -o

    C

    bosboot -a -d /dev/cd0

    D

    chdev -l cd0 -a boot=yes


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A defective CD-ROM drive is replaced with a new CD-ROM drive. The new CD-ROM drive is able to read any CD that it accesses， but music CDs do not play music. What is the MOST likely cause of this problem？（）

    • A、The audio cable is not connected to the drive.
    • B、The ribbon cable is not connected.
    • C、The power cable is not connected.
    • D、The CD-ROM drivers are not installed.

    正确答案:A

  • 第14题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第15题：

    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）

    • A、The profile data was not initialized after restoring the backup CD
    • B、The profile data was not backed up before doing the Critical Console Data backup
    • C、A Critical Console Data backup was performed which backs up user data， but not profile data
    • D、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

    正确答案:B

  • 第16题：

    Several people in an Information Technology （IT） department are asking for fileset updates that the system administrator received earlier that day on CD-ROM. The system administrator created an install directory on their machine and made it available to everyone. Which of the following commands will allow the system administrator to copy the images from the CD-ROM to the install directory？（）

    • A、smit bffcreate from the target directory
    • B、tar -xvf /dev/cd0 from the target directory
    • C、restore -xvqf /dev/cd0 from the target directory
    • D、mount the cdrom on /cdrom and cp /cdrom/* . from the target directory

    正确答案:A

  • 第17题：

    A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）

    • A、Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
    • B、Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 
    • C、Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 
    • D、Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

    正确答案:C

  • 第18题：

    单选题
    Several people in an Information Technology （IT） department are asking for fileset updates that the system administrator received earlier that day on CD-ROM. The system administrator created an install directory on their machine and made it available to everyone. Which of the following commands will allow the system administrator to copy the images from the CD-ROM to the install directory？（）
    A

    smit bffcreate from the target directory

    B

    tar -xvf /dev/cd0 from the target directory

    C

    restore -xvqf /dev/cd0 from the target directory

    D

    mount the cdrom on /cdrom and cp /cdrom/* . from the target directory


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）
    A

    The driver CD is for Windows XP only.

    B

    The technician needs to initialize the NIC first within Device Manager before installing a driver.

    C

    The driver on the CD is not digitally signed.

    D

    The driver is corrupt.


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）
    A

    Replace the video card with a compatible one.

    B

    Check the Windows XP Hardware Compatibility List.

    C

    Verify the boot order in the BIOS.

    D

    Install Windows XP RC2 first, then upgrade to Windows XP Media Center.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator issued a command to update thefirmware of an Ethernet adapter on a partitioned system, but received an error. What is the most likely cause of the problem?（）
    A

    The adapter must be taken offline prior to the firmware update.

    B

    The system has not been rebooted since the adapter was added to the LPAR.

    C

    The adapter must be assigned to the service partition prior to updating the firmware.

    D

    The adapter must be dynamically removed from the LPAR prior to updating thefirmware.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）
    A

    The adapter must be taken offline prior to the firmware update

    B

    The adapter must be assigned to the service partition prior to the firmware update

    C

    The system has not been rebooted since the adapter was added to the Logical Partition

    D

    The adapter must be dynamically removed from the Logical Partition prior to the firmware update


    正确答案： B
    解析： 暂无解析

相关内容