单选题In a chassis cluster with two SRX 5800 devices， the interface ge-13/0/0 belongs to which device？（）A This interface is a system-created interface.B This interface belongs to node 0 of the cluster.C This interface belongs to node 1 of the cluster.D This 

题目
单选题
In a chassis cluster with two SRX 5800 devices， the interface ge-13/0/0 belongs to which device？（）
A

This interface is a system-created interface.

B

This interface belongs to node 0 of the cluster.

C

This interface belongs to node 1 of the cluster.

D

This interface will not exist because SRX 5800 devices have only 12 slots.

相似考题

1.Click the Exhibit button.System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.Referring to the configuration shown in the exhibit, which two statements are true? （）(Choose two.)A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.C. A user can use SSH to interface ge-0/0/0.0.D. A user can use SSH to interface ge-0/0/1.0.

2.Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?()A. user@host# set chassis cluster cluster-id 1 node 0 rebootB. user@host> set chassis cluster id 1 node 0 rebootC. user@host> set chassis cluster cluster-id 1 node 0 rebootD. user@host# set chassis cluster id 1 node 0 reboot

3.If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }

4.Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?()A. the st interfaceB. the reth interfaceC. the fxp1 and fxp0 interfacesD. the fab0 and fab1 interfaces

更多“单选题In a chassis cluster with two SRX 5800 devices， the interface ge-13/0/0 belongs to which device？（）A This interface is a system-created interface.B This interface belongs to node 0 of the cluster.C This interface belongs to node 1 of the cluster.D This ”相关问题

  • 第1题：

    In a chassis cluster with two SRX 5800 devices, the interface ge－13／0／0 belongs to which device?()

    A. This interface is a system-created interface.

    B. This interface belongs to node 0 of the cluster.

    C. This interface belongs to node 1 of the cluster.

    D. This interface will not exist because SRX 5800 devices have only 12 slots.


    参考答案：C

  • 第2题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown? ()

    A. The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address 10.10.0.1.

    B. DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2.

    C. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP a ddress 10.0.0.1

    D. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address 10.0.0.6.

    E. Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router.


    参考答案：D, E

  • 第3题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）

    • A、Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router
    • B、The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1
    • C、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1
    • D、DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2
    • E、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6

    正确答案:A,E

  • 第4题：

    Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?（）

    • A、the st interface
    • B、the reth interface
    • C、the fxp1 and fxp0 interfaces
    • D、the fab0 and fab1 interfaces

    正确答案:D

  • 第5题：

    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4 

    • A、 NPV is not enabled on the core switch？
    • B、 The interface connected to the Core switch is in admin down state
    • C、 The local host interface belongs to the wrong VSAN？
    • D、 The local host interface is not able to login

    正确答案:B

  • 第6题：

    In a chassis cluster with two SRX 5800 devices, the interface ge-13/0/0 belongs to which device?（）

    • A、This interface is a system-created interface.
    • B、This interface belongs to node 0 of the cluster.
    • C、This interface belongs to node 1 of the cluster.
    • D、This interface will not exist because SRX 5800 devices have only 12 slots.

    正确答案:C

  • 第7题：

    You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?（）

    • A、set protocols   setospf area 0   set interface so-0/0/0.100
    • B、set protocols ospf area 0 interface so-0/0/0.100
    • C、edit protocols ospf interface so-0/0/0.100
    • D、edit protocols ospf area 0   set interface so-0/0/0.100

    正确答案:B,D

  • 第8题：

    单选题
    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4
    A

     NPV is not enabled on the core switch？

    B

     The interface connected to the Core switch is in admin down state

    C

     The local host interface belongs to the wrong VSAN？

    D

     The local host interface is not able to login


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A two-node cluster is configured for mutual takeover with two service IP labels. The cluster is Being tested for fallover behavior. Both nodes in the cluster have two network interfaces （ent0’ and ’ent1’） configured with IPAT via IP Replacement. When the network cable is removed from the interface card with the service address （’ent0’）， the service address is moved to ’ent1’， and ’ent0’ is reconfigured on its boot address. When the network cable is replaced on ’ent0，the service address does not switch back to ’ent0’.  What statement most accurately describes this situation？（）
    A

     EtherChannel is needed to automatically switch the service IP address back to ’ent0’.

    B

     This is the default behavior for a network interface failure with this configuration.

    C

     Gratuitous ARP support needs to be enabled for the IP Network Interface Module in SMIT.

    D

     The Inactive Network Takeover option should be set to true to forece the service address back to ’ent0’.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?（）
    A

    user@host# set chassis cluster cluster-id 1 node 0 reboot

    B

    user@host> set chassis cluster id 1 node 0 reboot

    C

    user@host> set chassis cluster cluster-id 1 node 0 reboot

    D

    user@host# set chassis cluster id 1 node 0 reboot


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）
    A

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }

    B

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }

    C

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }

    D

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    When devices are in cluster mode， which new interfaces are created？（）
    A

    No new interface is created.

    B

    Only the st interface is created.

    C

    fxp1， fab0， and fab1 are created.

    D

    st，fxp1，reth，fab0，and fab1 are created.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    In a JSRP cluster with two J6350 routers, the interface ge－7／0／0 belongs to which device? ()

    A. This interface is a system-created interface.

    B. This interface belongs to NODE0 of the cluster.

    C. This interface belongs to NODE1 of the cluster.

    D. This interface will not exist because J6350 routers have only six slots.


    参考答案：C

  • 第14题：

    Which two statements about the configuration of the switch interface are correct (Choose two)()。

    A.The switchport belongs only to VLAN 2

    B.Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2

    C.The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2

    D.A network host can be connected to this interface


    参考答案：A, D

  • 第15题：

    When devices are in cluster mode， which new interfaces are created？（）

    • A、No new interface is created.
    • B、Only the st interface is created.
    • C、fxp1， fab0， and fab1 are created.
    • D、st，fxp1，reth，fab0，and fab1 are created.

    正确答案:C

  • 第16题：

    The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）

    • A、Run cluster synchronization.
    • B、Restart cluster services on Node1.
    • C、Perform a swap_adapter using C-SPOC
    • D、Restart cluster services on both nodes

    正确答案:C

  • 第17题：

    A two-node cluster is configured for mutual takeover with two service IP labels. The cluster is Being tested for fallover behavior. Both nodes in the cluster have two network interfaces （ent0’ and ’ent1’） configured with IPAT via IP Replacement. When the network cable is removed from the interface card with the service address （’ent0’）， the service address is moved to ’ent1’， and ’ent0’ is reconfigured on its boot address. When the network cable is replaced on ’ent0，the service address does not switch back to ’ent0’.  What statement most accurately describes this situation？（）   

    • A、 EtherChannel is needed to automatically switch the service IP address back to ’ent0’.
    • B、 This is the default behavior for a network interface failure with this configuration.
    • C、 Gratuitous ARP support needs to be enabled for the IP Network Interface Module in SMIT.
    • D、 The Inactive Network Takeover option should be set to "true" to forece the service address back to ’ent0’.

    正确答案:B

  • 第18题：

    In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）

    • A、This interface is a system-created interface.
    • B、This interface belongs to NODE0 of the cluster.
    • C、This interface belongs to NODE1 of the cluster.
    • D、This interface will not exist because J6350 routers have only six slots.

    正确答案:C

  • 第19题：

    Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?（）

    • A、user@host# set chassis cluster cluster-id 1 node 0 reboot
    • B、user@host> set chassis cluster id 1 node 0 reboot
    • C、user@host> set chassis cluster cluster-id 1 node 0 reboot
    • D、user@host# set chassis cluster id 1 node 0 reboot

    正确答案:C

  • 第20题：

    单选题
    The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）
    A

    Run cluster synchronization.

    B

    Restart cluster services on Node1.

    C

    Perform a swap_adapter using C-SPOC

    D

    Restart cluster services on both nodes


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）
    A

    This interface is a system-created interface.

    B

    This interface belongs to NODE0 of the cluster.

    C

    This interface belongs to NODE1 of the cluster.

    D

    This interface will not exist because J6350 routers have only six slots.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    多选题
    Which two statements about the configuration of the switch interface are correct (Choose two)（）。
    A

    The switchport belongs only to VLAN 2

    B

    Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2

    C

    The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2

    D

    A network host can be connected to this interface


    正确答案： D,C
    解析： 暂无解析

  • 第23题：

    单选题
    Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?（）
    A

    the st interface

    B

    the reth interface

    C

    the fxp1 and fxp0 interfaces

    D

    the fab0 and fab1 interfaces


    正确答案： B
    解析： 暂无解析

相关内容