2 PCI-X drawers and 2 PCIe drawers
3 PCI-X drawers and 4 PCIe drawers
4 PCI-X drawers and 3 PCIe drawers
4 PCI-X drawers and 2 PCIe drawers
第1题:
A customer wants to migrate their existing compute-intensive POWER6 570 to a Power 770. Which of their existing I/O adapters can be migrated to Power 770 enclosures?()
第2题:
A customer has several single partition POWER5 and POWER6 processor-based systems housed in regional data centers and wants to consolidate into a single Power 770. They must minimize overall cost and the number of adapters, while ensuring a reliable infrastructure. Which solution addresses the customer requirements?()
第3题:
The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements?()
第4题:
A Power 770 customer needs to add additional I/O adapters. There is no room for the cards, so an I/O drawer must be added. What resource will help identify supported I/O drawers and the maximum number of drawers permitted per loop?()
第5题:
A customer is purchasing a 12-way p5-570 to run light development workloads on eight AIX 5.3 partitions with two network adapters each. When the current network configuration was reviewed, it was discovered that they only have four Ethernet ports available on their network switch. Which of the following solutions would prevent them from having to buy another network switch or hub?()
第6题:
I/O Planning Guide
Power Systems data sheet
Power Systems Facts and Features
Run FLRT to recommend I/O features
第7题:
Two dual-port PCIe adapters
A four-port PCIe Ethernet adapter
Four separate PCIe Ethernet adapters
Two embedded Integrated Virtual Ethernet adapters (IVE)
第8题:
Populate the Power 750 first then add a GX+ adapter to support PCI-X andPCIe I/O drawer loops.
Populate the Power 750 first then add 2 GX+ adapters to support PCI-X andPCIe I/O drawer loops.
Populate the Power 750 first then add a GX++ adapter to support PCI-X andPCIe I/O drawer loops.
Populate the Power 750 first then add GX+ and GX++ adapters to support PCI-X andPCIe I/O drawer loops.
第9题:
Populate the Power 750 first then add a GX+ adapter to support PCI-X and PCIe I/O drawer loops.
Populate the Power 750 first then add 2 GX+ adapters to support PCI-X and PCIe I/O drawer loops.
Populate the Power 750 first then add a GX++ adapter to support PCI-X and PCIe I/O drawer loops.
Populate the Power 750 first then add GX+ and GX++ adapters to support PCI-X and PCIe I/O drawer loops.
第10题:
Move the storage into a common SAN and virtualize the I/O using a single VIO Server with dual NIC connectors and dual HBAs
Move the existing physical network and storage adapters to the new system and virtualize the I/O using a single VIO Server.
Move the storage into a common SAN and virtualize the I/O using dual VIO Servers, each with dual NIC connectors and dual HBAs.
Move the storage into a common SAN and virtualize the I/O using dual VIO Servers, one with dual NIC connectors and the other with dual HBAs.
第11题:
An additional switch for the new HMc
Asynchronous adapters on the new HMc
The two 570 servers are directly connected to the new HMc
One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc
第12题:
It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.
It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.
It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.
It can support six LPARs with internal disks but will require special features, cables and an adapter to support the additional LPARs with internal disks.
第13题:
A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used. Which of the following fulfills the customer requirements?()
第14题:
A customer wants to migrate their existing compute-intensive POWER6 570 to a Power 770. Which of their existing I/O adapters can be migrated to Power 770 enclosures?()
第15题:
A customer plans to consolidate two 8-core POWER6 systems with a total of 8 PCI-X adapters, 6 PCIe adapters, and a PCI-X I/O drawer into a 16-core Power 750. Which action allows the most efficient use of existing equipment?()
第16题:
A customer plans to consolidate two 8-core POWER6 systems with a total of 8 PCI-X adapters, 6 PCIe adapters, and a PCI-X I/O drawer into a 16-core Power 750. Which action allows the most efficient use of existing equipment?()
第17题:
A customer is upgrading from a 16-core POWER6 570 with two enclosures to a 16-core Power 770 with only one enclosure. There are 22 PCI-X adapters and 19 PCIe adapters spread across the current CECs and I/O drawers. How many and what kind of drawers are needed to connect these adapters?()
第18题:
An additional switch for the new HMC
Asynchronous adapters on the new HMC
The two 570 servers are directly connected to the new HMC
One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC
第19题:
PCIe adapters
PCI-X adapters
PCI-X andPCIe adapters
PCI, PCI-X andPCIe adapters
第20题:
PCIe adapters are supported only in I/O drawers
PCI-X adapters are supported in both the CEC and in I/O drawers
PCI-X adapters are supported in the CEC; PCIe adapters are supported in 12X I/O drawers
PCIe adapters are supported in the CEC; PCI-X adapters are supported in 12X I/O drawers
第21题:
Add two HMCs with two Ethernet adapters each and run EtherChannel for the original eight partitions.
Add two HMCs with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.
Add two hosting partitions with two Ethernet adapters each and run EtherChannel for the original eight partitions.
Add two hosting partitions with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.
第22题:
PCIe adapters
PCI-X adapters
PCI-X and PCIe adapters
PCI, PCI-X and PCIe adapters
第23题:
One processor card and one GX+ expansion card
Two processor cards and one GX++ expansion card
One processor card, one GX+ expansion card, and one GX++ expansion card
Two processor cards, one GX+ expansion card, and one GX++ expansion card