单选题To load the base operating system on a machine using NIM， what are the minimum NIM resources   that must be defined for the installation to succeed（）A A mksysb resource， a SPOT resource， and an lpp_source resourceB A SPOT resource， an lpp_source resour

题目
单选题
To load the base operating system on a machine using NIM， what are the minimum NIM resources   that must be defined for the installation to succeed（）
A

A mksysb resource， a SPOT resource， and an lpp_source resource

B

A SPOT resource， an lpp_source resource， and a machine definition

C

An lpp_source resource， a mksysb resource， and a machine definition

D

A SPOT resource， an lpp_source resource， a bosinst_data resource， and a machine definition

相似考题

1.Which of the following is an optional NIM resource for a diskless client?()A.rootB.spotC.homeD.paging

2. An administrator is defining an lpp_source called lpp_AIX6 in NIM when the following warning message is displayed in the output：   warning： 0042-267 c_mk_lpp_source： The defined lpp_source does not have the ’simages’ attribute because one or more of the following packages are missing： bos   bos.net   bos.diag   bos.sysmgt   bos.terminfo   bos.terminfo.all.data   bos.mp64   devices.common   bos.64bit  What does this warning message mean？（）A、The lpp_AIX6 is not a valid lpp_source NIM resource.B、The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone clients.C、The lpp_AIX6 can be used in NIM CUST operations to install software on SPOTs and running machines.D、The lpp_AIX6 does not contain all of the required software packages for NIM CUST installation operations.WArialCourier NewTimes New RomanZ

3.Which of the following is an optional NIM resource for a diskless client?（）A、rootB、spotC、homeD、paging

4.WhataretheminimalresourcestoperformaNIMBOSinstall?()A.spot，lpp_sourceB.mksysb，lpp_sourceC.boot，bundle，nim_scriptD.aixdisks，spot，lpp_source

参考答案和解析
正确答案： A
解析： 暂无解析
更多“单选题To load the base operating system on a machine using NIM， what are the minimum NIM resources   that must be defined for the installation to succeed（）A A mksysb resource， a SPOT resource， and an lpp_source resourceB A SPOT resource， an lpp_source resour”相关问题

  • 第1题：

    An administrator is investigating why a non-prompted NIM rte install is failing after the successful netboot of the spot. A matching spot and lpp_source are correctly allocated to the NIM client in addition to a bosinst_data. What is the most likely cause of the install failure?（）

    • A、The bosinst_data has an incorrect console defined.
    • B、The bosinst_data is incompatible with the level of spot.
    • C、The bosinst_data has an incorrect disk location defined.
    • D、The bosinst_data has an incorrect language option defined.

    正确答案:C

  • 第2题：

    Company.com has a three-node cluster with six resource groups. There are two resource groups  for each node. A new hardware component will be added to one of the nodes. The customer wants to move the resource groups to other nodes，but not necessarily in the normal fallover order. Also，the resource groups must be moved at night when there is no one in the computer center. What can be done so that the resource group is moved at the most convenient normal fallover order. Also，the resource groups must be moved at night when there is no one in the computer center.  What can be done so that the resource group is moved at the most convenient time for the customer？（）   

    • A、 Create a custom resource group with a custom fallback timer to cause the system shutdown at he appropriate time.
    • B、 Set the system to stop with "shutdown" command at the appropriate time and allow HACMP to relocate the resources.
    • C、 Use a script that calls the cIRGmove command and place it in the cron or a queue to execute at the appropriate time.
    • D、 Change the existing resource groups to a custom type and add a timer to perform a "shutdown -h" command at the appropriate time.

    正确答案:C

  • 第3题：

    Company.com has a four-node cluster （nodes ’A’， ’B’， ’C’， and ’D’）. The nodes are set up in  Resource group pairs. Node ’A’ falls over to Node ’B’， and Node ’C’ falls over to Node ’C’. During a maintenance windows， it was discovered that the six resource groups on Node ’A’ are too much to be adequately handled by Node ’B’.  What could be done to better utilize the available resources during fallover？（）  

    • A、 Implement Work Load manager so that the application monitors for additional resource      requirements.
    • B、 Add a fifth node to function as a load leveler in order to control the dispatching of the resource jobs.
    • C、 Implement Dynamic Node Priorities in the resource groups in order to find a node with suitable system resources.
    • D、 Reduce the number of resource groups on Node ’A’ to 1 in order to ensure faster and more robust fallover to a single system.

    正确答案:C

  • 第4题：

    To load a base operating system on a machine using NIM， what are the minimum NIM resources that must be defined for the installation to succeed？（）

    • A、A mksysb resource， a SPOT resource， and an lpp_source resource
    • B、A SPOT resource， an lpp_source resource， and a machine definition
    • C、An lpp_source resource， a mksysb resource， and a machine definition
    • D、A SPOT resource， an lpp_source resource， a machine definition， and a bootable CD

    正确答案:B

  • 第5题：

    While attempting to load a base operating system to a machine， an administrator is receiving bootp timeout error messages. What steps should be followed to troubleshoot communications between the NIM master and the client machine？（）

    • A、View debug logs on NIM master for errors or failures.
    • B、Boot the client machine to SMS， and view the POST Error log.
    • C、Boot the client machine to SMS， setup remote IPL， and execute a ping test.
    • D、Boot the client machine to diagnostics， and ping the client from the NIM master.

    正确答案:C

  • 第6题：

    单选题
    Company.com has a three-node cluster with six resource groups. There are two resource groups  for each node. A new hardware component will be added to one of the nodes. The customer wants to move the resource groups to other nodes，but not necessarily in the normal fallover order. Also，the resource groups must be moved at night when there is no one in the computer center. What can be done so that the resource group is moved at the most convenient normal fallover order. Also，the resource groups must be moved at night when there is no one in the computer center.  What can be done so that the resource group is moved at the most convenient time for the customer？（）
    A

     Create a custom resource group with a custom fallback timer to cause the system shutdown at he appropriate time.

    B

     Set the system to stop with shutdown command at the appropriate time and allow HACMP to relocate the resources.

    C

     Use a script that calls the cIRGmove command and place it in the cron or a queue to execute at the appropriate time.

    D

     Change the existing resource groups to a custom type and add a timer to perform a shutdown -h command at the appropriate time.


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    An administrator is defining an lpp_source calledlpp_AIX6 in NIM when the following warning message is displayed in the output:warning: 0042-267 c_mk_lpp_source: The defined lpp_source does not have the 'simages' attribute because one or more of the following packages are missing: Bos bos.net bos.diag bos.sysmgtbos.terminfo bos.terminfo.all.data bos.mp64 devices.common bos.64bit. What does this warning message mean?（）
    A

    The lpp_AIX6 is not a valid lpp_source NIM resource.

    B

    The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone clients.

    C

    The lpp_AIX6 can be used in NIM CUST operations to install software on SPOTs and running machines.

    D

    The lpp_AIX6 does not contain all of the required software packages for NIM CUST installation operations.WArialCourier NewTimes New RomanZ


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    You have created a resource plan， DB_PLAN， using DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN and you want to impose a restriction on utilization of resources by the database users. Which step must be performed before you can start using the resource plan？（）
    A

     assign users to consumer groups

    B

     set the resource plan for the instance

    C

     configure a simple resource plan and specify plan directives

    D

     configure a complex resource plan and specify plan directives


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    For NIM to install client machines located in a non-adjacent network， which routing must be defined？（）
    A

    Boot/install servers will be required on each intermediate network.

    B

    When an install is initiated by the client， routing is only required from the LPAR back to the NIM master.

    C

    When an install is initiated by the NIM master， routing is only required from the NIM master to the client.

    D

    Appropriate network NIM resources need to be defined to the NIM master to allow routing in both directions.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You have two hosts that run VMware ESX. You need to recommend a management solution for the virtual machines （VMs） on the VMware hosts. The solution must support the ability to move the VMs from one VMware host to the other VMware host by using VMware vMotion technology. What should implement on the network？（）
    A

    a failover cluster between the VMs

    B

    Second-Level Address Translation （SLAT）

    C

    a failover cluster for the Hyper-V hosts

    D

    virtual machine queue （VMQ）

    E

    quick migration

    F

    Virtual Machine Chimney

    G

    Microsoft System Center Operations Manager with Performance and Resource Optimization （PRO）

    H

    Network Attached Storage （NAS）

    I

    Network Load Balancing （NLB） for the VMs

    J

    Network Load Balancing （NLB） for the Hyper-V hosts

    K

    Windows System Resource Manager （WSRM）

    L

    Microsoft System Center Virtual Machine Manager 2008 R2

    M

    Cluster Shared Volumes （CSV）

    N

    pass-through disks


    正确答案： K
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following is an optional NIM resource for a diskless client?（）
    A

    root

    B

    spot

    C

    home

    D

    paging


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    Company.com  with limited AIX skills has purchased a p5-520 2-way which will run Micro-Partitions. To reduce the initial cost of purchase， the customer will be sharing the system resources using a VIO server. The customer is concerned about managing the installation of the operating system. Which of the following should the customer perform？（）
    A

    Use alt_disk_install to install AIX on all logical partitions.

    B

    Configure the DVD as a desired resource on all partitions.

    C

    Configure all resources as shared resources between all partitions.

    D

    Create a separate NIM server to manage the installation of all partitions.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    To load the base operating system on a machine using NIM， what are the minimum NIM resources   that must be defined for the installation to succeed（）

    • A、A mksysb resource， a SPOT resource， and an lpp_source resource
    • B、A SPOT resource， an lpp_source resource， and a machine definition
    • C、An lpp_source resource， a mksysb resource， and a machine definition
    • D、A SPOT resource， an lpp_source resource， a bosinst_data resource， and a machine definition

    正确答案:B

  • 第14题：

    What are the minimal resources to perform a NIM BOS install?（）

    • A、spot, lpp_source
    • B、mksysb, lpp_source
    • C、boot, bundle, nim_script
    • D、aix disks, spot, lpp_source

    正确答案:A

  • 第15题：

    An administrator is defining an lpp_source calledlpp_AIX6 in NIM when the following warning message is displayed in the output:warning: 0042-267 c_mk_lpp_source: The defined lpp_source does not have the 'simages' attribute because one or more of the following packages are missing: Bos bos.net bos.diag bos.sysmgtbos.terminfo bos.terminfo.all.data bos.mp64 devices.common bos.64bit. What does this warning message mean?（）

    • A、The lpp_AIX6 is not a valid lpp_source NIM resource.
    • B、The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone clients.
    • C、The lpp_AIX6 can be used in NIM CUST operations to install software on SPOTs and running machines.
    • D、The lpp_AIX6 does not contain all of the required software packages for NIM CUST installation operations.WArialCourier NewTimes New RomanZ

    正确答案:C

  • 第16题：

    You have created a resource plan， DB_PLAN， using DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN and you want to impose a restriction on utilization of resources by the database users.   Which step must be performed before you can start using the resource plan？（）

    • A、assign users to consumer groups
    • B、set the resource plan for the instance
    • C、configure a simple resource plan and specify plan directives
    • D、configure a complex resource plan and specify plan directives

    正确答案:B

  • 第17题：

    单选题
    Company.com has a four-node cluster （nodes ’A’， ’B’， ’C’， and ’D’）. The nodes are set up in  Resource group pairs. Node ’A’ falls over to Node ’B’， and Node ’C’ falls over to Node ’C’. During a maintenance windows， it was discovered that the six resource groups on Node ’A’ are too much to be adequately handled by Node ’B’.  What could be done to better utilize the available resources during fallover？（）
    A

     Implement Work Load manager so that the application monitors for additional resource      requirements.

    B

     Add a fifth node to function as a load leveler in order to control the dispatching of the resource jobs.

    C

     Implement Dynamic Node Priorities in the resource groups in order to find a node with suitable system resources.

    D

     Reduce the number of resource groups on Node ’A’ to 1 in order to ensure faster and more robust fallover to a single system.


    正确答案： B
    解析： 暂无解析

  • 第18题：

    单选题
    You have created a resource plan， DB_PLAN， using DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN and you want to impose a restriction on utilization of resources by the database users.   Which step must be performed before you can start using the resource plan？（）
    A

    assign users to consumer groups

    B

    set the resource plan for the instance

    C

    configure a simple resource plan and specify plan directives

    D

    configure a complex resource plan and specify plan directives


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    An administrator is investigating why a non-prompted NIM rte install is failing after the successful netboot of the spot. A matching spot and lpp_source are correctly allocated to the NIM client in addition to a bosinst_data.  What is the most likely cause of the install failure？（）
    A

    The bosinst_data has an incorrect console defined.

    B

    The bosinst_data is incompatible with the level of spot.

    C

    The bosinst_data has an incorrect disk location defined.

    D

    The bosinst_data has an incorrect language option defined.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    You are using Resource Manager to manage system resources. While creating a new database user， you observe that the user is a member of DEFAULT_CONSUMER_GROUP by default. What would be the implications of this？（）
    A

    The Resource Manager plan does not affect the user.

    B

    There must be a plan directive in any of the plans of the group to control the resources.

    C

    The members of the group DEFAULT_CONSUMER_GROUP always have resource restrictions.

    D

    The members of DEFAULT_CONSUMER_GROUP are restrained from accessing the system tables.

    E

    The members of this group can change their group without the database administrator’s intervention.


    正确答案： E
    解析： 暂无解析

  • 第21题：

    单选题
    What are the minimal resources to perform a NIM BOS install?（）
    A

    spot, lpp_source

    B

    mksysb, lpp_source

    C

    boot, bundle, nim_script

    D

    aix disks, spot, lpp_source


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    While attempting to load a base operating system to a machine， an administrator is receiving bootp timeout error messages. What steps should be followed to troubleshoot communications between the NIM master and the client machine？（）
    A

    View debug logs on NIM master for errors or failures.

    B

    Boot the client machine to SMS， and view the POST Error log.

    C

    Boot the client machine to SMS， setup remote IPL， and execute a ping test.

    D

    Boot the client machine to diagnostics， and ping the client from the NIM master.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    To load a base operating system on a machine using NIM， what are the minimum NIM resources that must be defined for the installation to succeed？（）
    A

    A mksysb resource， a SPOT resource， and an lpp_source resource

    B

    A SPOT resource， an lpp_source resource， and a machine definition

    C

    An lpp_source resource， a mksysb resource， and a machine definition

    D

    A SPOT resource， an lpp_source resource， a machine definition， and a bootable CD


    正确答案： C
    解析： 暂无解析

相关内容