单选题An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）A Deallocate rootvg mirrorB Use hot replace managerC Break rootvg mirrorD Deallocate LPs from failed disk

题目
单选题
An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）
A

Deallocate rootvg mirror

B

Use hot replace manager

C

Break rootvg mirror

D

Deallocate LPs from failed disk

相似考题

1.A server configured with RAID 5 has recently suffered from two simultaneous disk failures. Which of the following would be required to bring the server back to operational status?()A. Break mirror arrayB. Replace cache batteryC. Replace hot standbyD. Restore from back upE. Replace defective hard drives

2.An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）A、Deallocate rootvg mirrorB、Use hot replace managerC、Break rootvg mirrorD、Deallocate LPs from failed disk

3.A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）A、chvgB、rmdevC、reducevgD、exportvg

4.There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）A.chgv -a n hdisk rootvg; rmdev -1 hdisk1 -dB.rmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1C.reducevg -df rootvg hdisk1; rmdev -1 hdisk1 -dD.reducevg -df rootvg hdisk1; rmdev -1 hdisk1

更多“单选题An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）A Deallocate rootvg mirrorB Use hot replace managerC Break rootvg mirrorD Deallocate LPs from failed disk”相关问题

  • 第1题：

    A server configured with RAID 5 has recently suffered from two simultaneous disk failures. Which of the following would be required to bring the server back to operational status?（）

    • A、Break mirror array
    • B、Replace cache battery
    • C、Replace hot standby
    • D、Restore from back up
    • E、Replace defective hard drives

    正确答案:D,E

  • 第2题：

    A server configured with RAID 5 has recently suffered from two simultaneous disk failures. Which of the following would be required to bring the server back to operational status？ （）

    • A、 Break mirror array
    • B、 Replace cache battery
    • C、 Replace hot standby
    • D、 Restore from backup
    • E、 Replace defective hard drives

    正确答案:D,E

  • 第3题：

    An administrator has a server that must be upgraded from AIX 5.2 to AIX 5.3. The administrator also   needs  to  use  the  64-bit  kernel  with  JFS2  filesystems  in  rootvg.  All  critical  data  resides  in  a  non-rootvg volume group.  Which of the following types of install could the administrator use to accomplish this（）

    • A、Migration Installation
    • B、Update.AII Installation
    • C、Preservation Installation
    • D、New and Complete Overwrite Installation

    正确答案:D

  • 第4题：

    A system administrator has determined a root mirrored disk， hdisk1， needs to be replaced. The root volume has been unmirrored. What is the next step to remove the disk drive？（）

    • A、cfgmgr
    • B、rmdev -d hdisk1 -l
    • C、reducevg rootvg hdisk1
    • D、have the IBM CE replace the disk

    正确答案:C

  • 第5题：

    A System p administrator needs to replace a failed internal disk in a mirrored rootvg.  Which of thefollowing is one of the steps that would need to be followed（）

    • A、Run cfgmgr
    • B、odmdelete CuAt
    • C、exportvg rootvg
    • D、Deallocate LPs from failed disk

    正确答案:A

  • 第6题：

    Which of the following is a benefit of ASM fast disk resync?（）

    • A、Failed disks are taken offline immediately but are not dropped.
    • B、Disk data is never lost.
    • C、By default, the failed disk is not dropped from the disk group ever, protecting you from loss of that disk.
    • D、The failed disk is automatically reformatted and then resynchronized to speed up the recovery process.
    • E、Hot spare disks are automatically configured and added to the disk group.

    正确答案:A

  • 第7题：

    You are the network administrator for All network servers run Windows Server 2003. One of your servers, TestKingSrv1, contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. TestKingSrv1 is running and users are connecting to shared folders on the RAID-5 volume. You shut down the server and replace the failed disk. Now you need to ensure that the RAID-5 volume is redundant. What should you do?（）

    • A、Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
    • B、Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.
    • C、Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
    • D、Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.

    正确答案:C

  • 第8题：

    单选题
    A System p administrator needs to replace a failed internal disk in a mirrored rootvg.  Which of thefollowing is one of the steps that would need to be followed（）
    A

    Run cfgmgr

    B

    odmdelete CuAt

    C

    exportvg rootvg

    D

    Deallocate LPs from failed disk


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for All network servers run Windows Server 2003. One of your servers, TestKingSrv1, contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. TestKingSrv1 is running and users are connecting to shared folders on the RAID-5 volume. You shut down the server and replace the failed disk. Now you need to ensure that the RAID-5 volume is redundant. What should you do?（）
    A

    Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.

    B

    Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.

    C

    Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.

    D

    Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）
    A

    Deallocate rootvg mirror

    B

    Use hot replace manager

    C

    Break rootvg mirror

    D

    Deallocate LPs from failed disk


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following is a benefit of ASM fast disk resync？（）
    A

     Failed disks are taken offline immediately but are not dropped.

    B

     Disk data is never lost.

    C

     By default， the failed disk is not dropped from the disk group ever， protecting you from loss of that disk.

    D

     The failed disk is automatically reformatted and then resynchronized to speed up the recovery process.

    E

     Hot spare disks are automatically configured and added to the disk group.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）
    A

    chvg

    B

    rmdev

    C

    reducevg

    D

    exportvg


    正确答案： D
    解析： 暂无解析

  • 第13题：

    If a technician needs to convert a hard drive from Basic to Dynamic, which of the following utilities would the technician use?（）

    • A、Add Hardware Wizard
    • B、Device Manager
    • C、Computer Management
    • D、Disk Management

    正确答案:D

  • 第14题：

    A user reports that their hard drive has failed and needs to be replaced. Which of the following should the technician do FIRST?（）

    • A、Run the hard disk manufacturer’s diagnostic program
    • B、Re-image the drive
    • C、Replace the hard drive and load Windows
    • D、Ask the user diagnostic questions

    正确答案:D

  • 第15题：

    An administrator has mirrored the root volume group to a second disk， but ’bootlist’ is failing to correctly add the second disk.  What is the likely cause of the problem？（）  

    • A、The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.
    • B、The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.
    • C、The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.
    • D、The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.

    正确答案:A

  • 第16题：

    There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）

    • A、chgv -a n hdisk rootvg; rmdev -1 hdisk1 -d
    • B、rmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1
    • C、reducevg -df rootvg hdisk1; rmdev -1 hdisk1 -d
    • D、reducevg -df rootvg hdisk1; rmdev -1 hdisk1

    正确答案:C

  • 第17题：

    A system administrator needs to replace a mirrored disk.  After performing the proper removal process and replacing the disk, which of the following set of commands should be performed to bring the disk back into production?（）

    • A、 reboot, mklvcopy, syncvg 
    • B、 cfgmgr -vl ssar, chvg -va, syncvg 
    • C、 cfgmgr, extendvg, syncvg 
    • D、 extendvg, mklvcopy, syncvg

    正确答案:C

  • 第18题：

    You are the network administrator for your company. All network servers run Windows Server 2003.One of your servers contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. The server is running and users are connecting to shared folders on the RAID-5 volume.You shut down the server and replace the failed disk.Now you need to ensure that the RAID-5 volume is redundant.What should you do? （）

    • A、Initialize the new disk. Select the failed region and then select the Repair Volume option.
    • B、Import the foreign disk. Select the failed region and then select the Repair Volume option.
    • C、Initialize the new disk. Select the failed region and then select the Reactivate Disk option.
    • D、Import the foreign disk. Select the failed region and then select the Reactivate Disk option.

    正确答案:A

  • 第19题：

    单选题
    There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）
    A

    chgv -a n hdisk rootvg; rmdev -1 hdisk1 -d

    B

    rmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1

    C

    reducevg -df rootvg hdisk1; rmdev -1 hdisk1 -d

    D

    reducevg -df rootvg hdisk1; rmdev -1 hdisk1


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    You are the network administrator for your company. All network servers run Windows Server 2003. One of your servers contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. The server is running and users are connecting to shared folders on the RAID-5 volume. You shut down the server and replace the failed disk. Now you need to ensure that the RAID-5 volume is redundant. What should you do? （）
    A

    Initialize the new disk. Select the failed region and then select the Repair Volume option.

    B

    Import the foreign disk. Select the failed region and then select the Repair Volume option.

    C

    Initialize the new disk. Select the failed region and then select the Reactivate Disk option.

    D

    Import the foreign disk. Select the failed region and then select the Reactivate Disk option.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator has mirrored the root volume group to a second disk， but ’bootlist’ is failing to correctly add the second disk.  What is the likely cause of the problem？（）
    A

    The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.

    B

    The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.

    C

    The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.

    D

    The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A system administrator has determined a root mirrored disk， hdisk1， needs to be replaced. The root volume has been unmirrored. What is the next step to remove the disk drive？（）
    A

    cfgmgr

    B

    rmdev -d hdisk1 -l

    C

    reducevg rootvg hdisk1

    D

    have the IBM CE replace the disk


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator has a server that must be upgraded from AIX 5.2 to AIX 5.3. The administrator also   needs  to  use  the  64-bit  kernel  with  JFS2  filesystems  in  rootvg.  All  critical  data  resides  in  a  non-rootvg volume group.  Which of the following types of install could the administrator use to accomplish this（）
    A

    Migration Installation

    B

    Update.AII Installation

    C

    Preservation Installation

    D

    New and Complete Overwrite Installation


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A system administrator needs to replace a mirrored disk.  After performing the proper removal process and replacing the disk, which of the following set of commands should be performed to bring the disk back into production?（）
    A

     reboot, mklvcopy, syncvg 

    B

     cfgmgr -vl ssar, chvg -va, syncvg 

    C

     cfgmgr, extendvg, syncvg 

    D

     extendvg, mklvcopy, syncvg


    正确答案： A
    解析： 暂无解析

相关内容