单选题The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Ins

题目
单选题
The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Installation Manager （NIM） server or a Hardware Management Console （HMC）？（）
A

 mksysb -t vio /mountpoint

B

 backupios -file /mountpoint

C

 mksysb -i /mountpoint/vio.mksysb

D

 backupios -mksysb -file /mountpoint/vio.mksysb

相似考题

1.You are the network administrator for The network consists of asingle Active Directory domain named All domain controllers runWindows Server 2003, and all client computers run Windows XP Professional. Eachdomain server has a locally attached tape device.You need to back up each domain controller. Your backup process must fulfil thefollowing requirements:a. System recovery must be possible in the event of server failure.b. The system configuration and all current dynamic disk configurations must bebacked up.c. Other data partitions do not need to be backed up.What should you do?（）A. Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.B. Use the Backup utility to back up the contents of all mounted drives.C. Use the Backup utility to back up only the System State data.D. Use the Copy command to copy C:\windows and its subfolders to a shared folder on the network.E. Use the Xcopy command to copy C:\windows and its subfolders to a shared folder on the network.

2.The backup utility reports an error while performing the backup process. The server indicates noother problems. Which of the following is the MOST likely cause of the failed backup？（）A、 Network is unavailableB、 The backup software is misconfiguredC、 The current backup tape is badD、 The wrong size backup tapes were loaded

3.An administrator wants to restore the /etc/resolv.conf file from a mksysb backup onto server1.  After the mksysb is mounted in /mnt/backup/ from the local nim server， which command should be run to restore the file？ （） A、tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.confB、restore -Tvf /mnt/backup/server1.mksysb ./etc/resolv.confC、listvgbackup -f /mnt/backup/server1.mksysb  -r ./etc/resolv.confD、restorevgfiles -xrm /mnt/backup/server1.mksysb ./etc/resolv.conf

4. The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Installation Manager （NIM） server or a Hardware Management Console （HMC）？（）A、 mksysb -t vio /mountpointB、 backupios -file /mountpointC、 mksysb -i /mountpoint/vio.mksysbD、 backupios -mksysb -file /mountpoint/vio.mksysb

更多“单选题The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Ins”相关问题

  • 第1题：

    You are the network administrator for your company. All network servers run Windows Server 2003. All client computers run Windows XP Professional. A member server named Server1 is located at a branch office that does not permit the use of Remote Desktop Protocol. Another administrator uses the Backup utility to create a scheduled backup job on Server1. The backup job performs a normal backup of an application server. The application server is removed from the network. You need to use a client computer to remove the backup job from Server1. You cannot travel to the branch office. What should you do? （）

    • A、Use the RUNAS feature to run the at /delete command as the Server1/Administrator account.
    • B、Log on by using your Administrator account and run the ntbackup /D command.
    • C、Log on by using your Administrator account and run the schtasks /delete command.
    • D、Use the RUNAS feature to run the taskkill command as the Server1/Administrator account.

    正确答案:C

  • 第2题：

    An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration?（）

    • A、lsmap -all
    • B、lsmap -net
    • C、lsmap -ent
    • D、lsmap -vlan

    正确答案:B

  • 第3题：

    An administrator wants to restore the /etc/resolv.conf file from a mksysb backup onto server1. After the mksysb is mounted in /mnt/backup/ from the local nim server. Which command should be run to restore the file?（）

    • A、tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.conf
    • B、restore -Tvf /mnt/backup/server1.mksysb ./etc/resolv.conf
    • C、listvgbackup -f /mnt/backup/server1.mksysb -r ./etc/resolv.conf
    • D、restorevgfiles -xrm /mnt/backup/server1.mksysb ./etc/resolv.conf

    正确答案:C

  • 第4题：

    You are the network administrator for your company. All network servers run Windows Server 2003. All client computers run Windows XP Professional. A member server named Server1 is located at a branch office that does not permit the use of Remote Desktop Protocol. Another administrator uses the Backup utility to create a scheduled backup job on Server1. The backup job performs a normal backup of an application server. The application server is removed from the network. You need to use a client computer to remove the backup job from Server1. You cannot travel to the branch office. What should you do?（）

    • A、Use the RUNAS feature to run the at /delete command as the Server1/Administrator account.
    • B、Log on by using your Administrator account and run the ntbackup /D command.
    • C、Log on by using your Administrator account and run the schtasks /delete command.
    • D、Use the RUNAS feature to run the taskkill command as the Server1/Administrator account.

    正确答案:C

  • 第5题：

    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第6题：

    You are the network administrator for your company. All network servers run Windows Server 2003. A member server named Server1 hosts several hundred folders, which are located on multiple volumes on the server. A backup job on Server1 is configured to run a normal backup of the folders every Saturday at 1:00 A.M. On Wednesday morning, you discover that you need to install a new application on Server1 before the close of business that day. You need to back up all folders on Server1 as quickly as possible so you can install the new application. What should you do? （）

    • A、Create a new backup job that specifies the folders and runs once only.
    • B、Run the existing backup job.
    • C、Enable Volume Shadow Copy for the volumes that contain the folders.
    • D、Create an Automated System Recovery (ASR) set.

    正确答案:B

  • 第7题：

    单选题
    Which of the following commands is used to restore the VIO server from a backup image？（）
    A

    dd

    B

    tar

    C

    restore

    D

    installios


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    You are the network administrator for your company. All network servers run Windows Server 2003. All client computers run Windows XP Professional. A member server named Server1 is located at a branch office that does not permit the use of Remote Desktop Protocol. Another administrator uses the Backup utility to create a scheduled backup job on Server1. The backup job performs a normal backup of an application server. The application server is removed from the network. You need to use a client computer to remove the backup job from Server1. You cannot travel to the branch office. What should you do?（）
    A

    Use the RUNAS feature to run the at /delete command as the Server1/Administrator account.

    B

    Log on by using your Administrator account and run the ntbackup /D command.

    C

    Log on by using your Administrator account and run the schtasks /delete command.

    D

    Use the RUNAS feature to run the taskkill command as the Server1/Administrator account.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    The administrator wants to backup the existing VIO server software and its current configuration before applying an update.  What command will the administrator use to backup the VIO server software so that the backup can be restored from a Network Installation Manager （NIM） server or a Hardware Management Console （HMC）？（）
    A

     mksysb -t vio /mountpoint

    B

     backupios -file /mountpoint

    C

     mksysb -i /mountpoint/vio.mksysb

    D

     backupios -mksysb -file /mountpoint/vio.mksysb


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration？（）
    A

    lsmap -all

    B

    lsmap -net

    C

    lsmap -ent

    D

    lsmap -vlan


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）
    A

    NPIV andvSCSI both require multipathing in VIO Server only.

    B

    NPIV requiresmultipathing software on client LPARs, vSCSI requires multipathing software on VIO Server.

    C

    NPIV requiresmultipathing software on VIO Server, vSCSI requires multipathing software on client LPARs.

    D

    NPIV requiresmultipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing   software on VIO Server and MPIO on client LPARs.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You are the network administrator for your company. All network servers run Windows Server 2003. All client computers run Windows XP Professional. A member server named Server1 is located at a branch office that does not permit the use of Remote Desktop Protocol. Another administrator uses the Backup utility to create a scheduled backup job on Server1. The backup job performs a normal backup of an application server. The application server is removed from the network. You need to use a client computer to remove the backup job from Server1. You cannot travel to the branch office. What should you do? （）
    A

    Use the RUNAS feature to run the at /delete command as the Server1/Administrator account.

    B

    Log on by using your Administrator account and run the ntbackup /D command.

    C

    Log on by using your Administrator account and run the schtasks /delete command.

    D

    Use the RUNAS feature to run the taskkill command as the Server1/Administrator account.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）

    • A、NPIV and vSCSI both require multipathing in VIO Server only. 
    • B、NPIV requires multipathing software on client LPARs, vSCSI requires multipathing software on VIO Server. 
    • C、NPIV requires multipathing software on VIO Server, vSCSI requires multipathing software on client LPARs. 
    • D、NPIV requires multipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing software on VIO Server and MPIO on client LPARs.

    正确答案:B

  • 第14题：

    Which of the following commands is used to restore the VIO server from a backup image？（）

    • A、dd
    • B、tar
    • C、restore
    • D、installios

    正确答案:D

  • 第15题：

    Company.com recently experienced an unanticipated system outage when the VIO server was upgraded. The current p5-570 has six Micro-Partitions and a VIO server partition. How can a similar outage be avoided in the future？（）

    • A、Use DLPAR to avoid an outage.
    • B、Deploy a redundant VIO server in the POWER5 system.
    • C、Add additional Host Bus Adapters and Network adapters to the VIO server.
    • D、Implement a standby server and move all partitions to it before applying future updates.

    正确答案:B

  • 第16题：

    You are the administrator of a Windows Server 2003 computer named Server1. You log on to Server1 and attempt to access the network. You discover that the server is not communicating on the network. You discover that a service pack and an updated network adapter driver were installed on Server1 the previous night. A complete backup, including the System State data, was performed before the service pack and the driver were installed. You need to restore network communications. What should you do first? （）

    • A、Use Roll Back Driver to reinstall the previous driver for the network adapter.
    • B、Use the Backup or Restore Wizard to restore the backup from the previous night.
    • C、Restart Server1 by using the Last Known Good Configuration option.
    • D、Use the Registry Editor to delete the registry settings for the network adapter driver.

    正确答案:A

  • 第17题：

    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: a. System recovery must be possible in the event of server failure. b. The system configuration and all current dynamic disk configurations must be backed up. c. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第18题：

    You are the network administrator for your company. The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第19题：

    单选题
    The backup utility reports an error while performing the backup process. The server indicates noother problems. Which of the following is the MOST likely cause of the failed backup？（）
    A

     Network is unavailable

    B

     The backup software is misconfigured

    C

     The current backup tape is bad

    D

     The wrong size backup tapes were loaded


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）
    A

    ImplementPowerHA SystemMirror on both VIO servers.

    B

    ConfigureEtherchannel between the client LPARs and the two VIO servers

    C

    Configure Network Interface Backup between the two VIO servers and use each VIO server to access the  network.

    D

    Implement Shared Ethernet Adapter failover and have all client partitions access the network through the   shared adapters.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain All network servers run Windows Server 2003. One member server hosts a folder named F:/TestKingData. Thousands of users constantly request and updates files in F:/TestKingData. You use the Backup utility to perform an incremental backup of F:/TestKingData on magnetic tape. The backup completes normally, but you see an error indicator illuminated on the tape server. You need to verify that you can restore F:/TestKingData from the backup tape. The verification process must not affect existing files. What should you do?（）
    A

    In the Backup utility, use the Restore and Manage Media tab to select the original tape media. Ensure that files will be restored to their original location. Start the restoration and verify that all files are restored successfully.

    B

    In the Backup utility, use the Restore and Manage Media tab to select the original tape media. Ensure that files will be restored to a new location. Start the restoration and verify that all files are restored successfully.

    C

    In the Backup utility, select the Verify data after the backup completes option. Use the original backup tape to perform another incremental backup. Ensure that all files are verifies successfully.

    D

    In the Backup utility, select the Verify data after the backup completes option. Use a new backup tape to perform another incremental backup. When the verification phase of the backup begins, replace the new tape with the original tape. Ensure that all files are verified successfully.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator wants to restore the /etc/resolv.conf file from a mksysb backup onto server1. After the mksysb is mounted in /mnt/backup/ from the local nim server. Which command should be run to restore the file？（）
    A

    tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.conf

    B

    restore -Tvf /mnt/backup/server1.mksysb ./etc/resolv.conf

    C

    listvgbackup -f /mnt/backup/server1.mksysb -r ./etc/resolv.conf

    D

    restorevgfiles -xrm /mnt/backup/server1.mksysb ./etc/resolv.conf


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You are the network administrator for your company. All network servers run Windows Server 2003. A member server named Server1 hosts several hundred folders, which are located on multiple volumes on the server. A backup job on Server1 is configured to run a normal backup of the folders every Saturday at 1:00 A.M. On Wednesday morning, you discover that you need to install a new application on Server1 before the close of business that day. You need to back up all folders on Server1 as quickly as possible so you can install the new application. What should you do? （）
    A

    Create a new backup job that specifies the folders and runs once only.

    B

    Run the existing backup job.

    C

    Enable Volume Shadow Copy for the volumes that contain the folders.

    D

    Create an Automated System Recovery (ASR) set.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator wants to restore the /etc/resolv.conf file from a mksysb backup onto server1.  After the mksysb is mounted in /mnt/backup/ from the local nim server， which command should be run to restore the file？ （）
    A

    tar -xvf /mnt/backup/server1.mksysb ./etc/resolv.conf

    B

    restore -Tvf /mnt/backup/server1.mksysb ./etc/resolv.conf

    C

    listvgbackup -f /mnt/backup/server1.mksysb  -r ./etc/resolv.conf

    D

    restorevgfiles -xrm /mnt/backup/server1.mksysb ./etc/resolv.conf


    正确答案： B
    解析： 暂无解析

相关内容