Two SCSI paths and two 73GB SCSI disks
Two SCSI paths and two 36GB SCSI disks
Four SCSI paths and four 73GB SCSI disks
Two dual port SCSI RAID adapters with two 73GB SCSI disks
第1题:
Companycom is about to purchase a POWER5 Enterprise server which requires two Ethernet ports and two disks for each of the four LPARs. It has been configured and validated using the IBM eConfig tool. Which of the following is very important to verify in addition to the eConfig validation?()
第2题:
You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start, the system no longer boots. What is most likely the cause of this problem?()
第3题:
Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?()
第4题:
Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?()
第5题:
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?()
第6题:
Reallocate the Virtual IO Server disks to the user LPAR
Create a stripe-group within the Virtual IO Server to protect against disk failure
Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
第7题:
Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.
Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.
Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.
Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.
第8题:
Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.
第9题:
292GB
438GB
584GB
728GB
第10题:
Add the virtual disks to IDE Controller 0.
Add the virtual disks to an existing SCSI controller.
Remove the virtual DVD drive, and add the virtual disks to IDE Controller1.
Add five SCSI controllers to the VM, and add one virtual disk to each SCSI controller.
第11题:
288GB
360GB
432GB
728GB
第12题:
SCSI-1 supports only 8 devices including the adaptor.
SCSI-1 supports only 6 disks per adaptor.
There is a SCSI-ID conflict that causes that problem.
You forgot to set the SCSI-ID #8 for the new disk.
第13题:
What are the two parallel SCSI specifications?()
第14题:
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system administrator has decided to configure all six drives in a RAID 5 array. How much usable disk space will this array have?()
第15题:
What type of configuration can provide the best availability in a Virtual IO Server environment?()
第16题:
Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows: Fibre Channel Card 01 - partition one - required Fibre Channel Card 02 - partition one - required SCSI adapter 01 - partition one - desired IDE adapter 01 - partition one - required Ethernet adapter 01 - partition one - required Ethernet adapter 01 - partition two - required SCSI adapter 02 - partition two - required IDE adapter 01 - partition two - desired Which of the following actions will enable the installation of the AIX image?()
第17题:
Total number of SCSI adapters
Total number of Ethernet adapters
Total number of Ethernet adapters and number of SCSI paths per LPAR
Total number of SCSI paths available and total number of SCSI adapters
第18题:
Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.
Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.
Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.
Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.
第19题:
Up to 25 m bus length
Only one device per SCSI bus
Up to 16 devices per SCSI bus
Half-duplex operation
Full-duplex operation
第20题:
Provide multiple paths to all resources through 2 or more Virtual IO Servers
Mirror all disk resources on the Virtual IO Server to present to the client LPAR
Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter (SEA)
第21题:
The ability to interleave writes to the array
High Availability and failover
LUN sharing via Target Mode SCSI on the storage system
A greater number of LUNS available on the same storage system
第22题:
288GB
360GB
432GB
728GB
第23题:
The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions.
The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks.
The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition.
The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.