单选题A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error co

题目
单选题
A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）
A

Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.

B

Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.

C

Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.

D

Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

相似考题

1.Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）A、Create two virtual adapters on the client， each one from a separate Virtual IO ServerB、Enable dead gateway detection on the client so that the network traffic can be reroutedC、Have a spare network card on standby in the client in case the Virtual IO Server goes downD、Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Servers

2. A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server. Permanent error messages for virtual hardware are stored on the client partition.D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

3. Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）A、Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.B、Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.C、Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.D、Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.

4.How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?（）A、Dedicated processors are fractions of whole processors that are dedicated to a single partition. B、Virtual processors are the whole number of concurrent operations that the operating system can use. C、Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions. D、Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error co”相关问题

  • 第1题：

    What type of configuration can provide the best availability in a Virtual IO Server environment?（）

    • A、Provide multiple paths to all resources through 2 or more Virtual IO Servers
    • B、Mirror all disk resources on the Virtual IO Server to present to the client LPAR
    • C、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
    • D、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）

    正确答案:A

  • 第2题：

    Companycom has successfully established their p5 LPAR environment on a POWER5 p5 590 running AIX 5.2. They are now ready to move to Virtual IO. What would be required to do Virtual IO?（）

    • A、Apply APAR IY62262 to the current AIX 5.2 Maintenance level 04. Virtual IO Server is not required. 
    • B、Purchase Advanced POWER Virtualization software, upgrade to AIX 5.3 maintenance level 1 and apply APAR IY60349. Virtual IO Server is not required. 
    • C、Verify that there are enough resources to add a Virtual IO Server, upgrade to AIX 5.3 with APAR IY60349, create a Virtual IO Server after applying APAR IY62262. 
    • D、Verify that there are enough resources to add a Virtual IO Server, create a Virtual IO Server and apply APAR IY62262, verify that the system is at AIX 5.2 with Maintenance level 04.

    正确答案:C

  • 第3题：

    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）

    • A、Capped and with a lower share
    • B、Uncapped and with a lower share
    • C、Uncapped and with a higher share
    • D、Capped and with no change in share

    正确答案:C

  • 第4题：

    You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of  a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have  Windows Server 2012 R2 installed.ENSUREPASS.com has a server， named ENSUREPASS-SR07， which has two physical disks installed. The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequentto creating the virtual machine， you have to connect the D:// drive to the virtual machine.  Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）

    • A、The physical disk should not be online
    • B、The physical disk should be uninstalled and re-installed
    • C、The physical disk should be configured as a striped disk
    • D、The physical disk should be configured as a mirrored disk

    正确答案:A

  • 第5题：

    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）

    • A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 
    • B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 
    • C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 
    • D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

    正确答案:A

  • 第6题：

    单选题
    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
    A

    Reallocate the Virtual IO Server disks to the user LPAR

    B

    Create a stripe-group within the Virtual IO Server to protect against disk failure

    C

    Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk

    D

    Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers


    正确答案： B
    解析： 暂无解析

  • 第7题：

    单选题
    A client has the need to reboot one of their Virtual IO Servers. What command(s) would be run to list the clients that are dependant on Virtual IO Server disk and network resources?（）
    A

    lsmap -all -net

    B

    lsclient -disk -net

    C

    lsdev -virtual -client

    D

    lsmap -all; lsmap -net


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）
    A

    Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.

    B

    Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.

    C

    Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.

    D

    Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    What type of configuration can provide the best availability in a Virtual IO Server environment?（）
    A

    Provide multiple paths to all resources through 2 or more Virtual IO Servers

    B

    Mirror all disk resources on the Virtual IO Server to present to the client LPAR

    C

    Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server

    D

    Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of  a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have  Windows Server 2012 R2 installed.ENSUREPASS.com has a server， named ENSUREPASS-SR07， which has two physical disks installed. The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequentto creating the virtual machine， you have to connect the D:// drive to the virtual machine.  Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）
    A

    The physical disk should not be online

    B

    The physical disk should be uninstalled and re-installed

    C

    The physical disk should be configured as a striped disk

    D

    The physical disk should be configured as a mirrored disk


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A company has several legacy servers that upper management would like to move into a virtual environment. Which of the following is the FIRST step an administrator should take to evaluating whether the servers can be moved into the virtual environment？（）
    A

     Compare the costs of maintenance between the physical and virtual servers.

    B

     Run SYSPREP on each legacy server.

    C

     Check the HCL on each legacy server.

    D

     Verify that all the latest OS service packs are installed on each server.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）
    A

    Create two virtual adapters on the client， each one from a separate Virtual IO Server

    B

    Enable dead gateway detection on the client so that the network traffic can be rerouted

    C

    Have a spare network card on standby in the client in case the Virtual IO Server goes down

    D

    Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two  separate Virtual IO Servers


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

    • A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
    • B、Use the same virtual LAN ID on each LPAR.
    • C、Set up IP routing through an LPAR on each system.
    • D、Set up an IP firewall through an LPAR on each system.

    正确答案:A

  • 第14题：

    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）

    • A、Reallocate the Virtual IO Server disks to the user LPAR
    • B、Create a stripe-group within the Virtual IO Server to protect against disk failure
    • C、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
    • D、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers

    正确答案:D

  • 第15题：

    You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed.ABC.com has a server， named ABC-SR07， which has two physical disks installed.The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating the virtual machine， you have to connect the D:// drive to the virtual machine.  Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）

    • A、The physical disk should not be online.
    • B、The physical disk should be uninstalled and re-installed.
    • C、The physical disk should be configured as a striped disk.
    • D、The physical disk should be configured as a mirrored disk.

    正确答案:A

  • 第16题：

    Your company has an Active Directory Domain Services （AD DS） domain that includes an AD security group named Monitoring. You are configuring a Windows Server 2008 R2 Hyper-V server that hosts several virtual machines （VMs）. You need to ensure that members of the Monitoring group can only stop and start VMs on the host server. What should you do？（）

    • A、Add the Monitoring group to the Server Operators AD security group.
    • B、In Authorization Manager， add the Monitoring group to the Administrator role in the default scope.
    • C、In Authorization Manager， create a task that includes the Stop Virtual Machine and Start Virtual Machine operations. Add the task to the Administrator role.
    • D、In Authorization Manager， create a role in the default scope. Add the Stop Virtual Machine and Start Virtual Machine operations to the role. Assign the Monitoring group to the role.

    正确答案:D

  • 第17题：

    单选题
    Your company has an Active Directory Domain Services （AD DS） domain that includes an AD security group named Monitoring. You are configuring a Windows Server 2008 R2 Hyper-V server that hosts several virtual machines （VMs）. You need to ensure that members of the Monitoring group can only stop and start VMs on the host server. What should you do？（）
    A

    Add the Monitoring group to the Server Operators AD security group.

    B

    In Authorization Manager， add the Monitoring group to the Administrator role in the default scope.

    C

    In Authorization Manager， create a task that includes the Stop Virtual Machine and Start Virtual Machine operations. Add the task to the Administrator role.

    D

    In Authorization Manager， create a role in the default scope. Add the Stop Virtual Machine and Start Virtual Machine operations to the role. Assign the Monitoring group to the role.


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    Companycom has successfully established their p5 LPAR environment on a POWER5 p5 590 running AIX 5.2. They are now ready to move to Virtual IO. What would be required to do Virtual IO?（）
    A

    Apply APAR IY62262 to the current AIX 5.2 Maintenance level 04. Virtual IO Server is not required. 

    B

    Purchase Advanced POWER Virtualization software, upgrade to AIX 5.3 maintenance level 1 and apply APAR IY60349. Virtual IO Server is not required. 

    C

    Verify that there are enough resources to add a Virtual IO Server, upgrade to AIX 5.3 with APAR IY60349, create a Virtual IO Server after applying APAR IY62262. 

    D

    Verify that there are enough resources to add a Virtual IO Server, create a Virtual IO Server and apply APAR IY62262, verify that the system is at AIX 5.2 with Maintenance level 04.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）
    A

    Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.

    B

    Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.

    C

    Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.

    D

    Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）
    A

    Capped and with a lower share

    B

    Uncapped and with a lower share

    C

    Uncapped and with a higher share

    D

    Capped and with no change in share


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator is getting reports that a file server is responding slowly. Which of the following steps should the administrator take FIRST？（）
    A

    Remove unnecessary files on the server to free up hard disk space.

    B

    Defragment the server’s hard disks.

    C

    Compare monitoring results with the server baseline.

    D

    Add additional memory to reduce paging.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed.ABC.com has a server， named ABC-SR07， which has two physical disks installed.The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating the virtual machine， you have to connect the D:// drive to the virtual machine.  Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）
    A

    The physical disk should not be online.

    B

    The physical disk should be uninstalled and re-installed.

    C

    The physical disk should be configured as a striped disk.

    D

    The physical disk should be configured as a mirrored disk.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）
    A

    The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 

    B

    The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 

    C

    The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 

    D

    The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.


    正确答案： A
    解析： 暂无解析

相关内容