单选题Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help ident

题目
单选题
Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help identify the processor requirement?()
A

Activate the Trial COD for the processors and run a test to verify outcome

B

Activate the On/Off COD for the processors and run a test to verify outcome

C

Use rmss to simulate the processor workload and run a test to verify outcome

D

Use rmps to simulate the processor workload and run a test to verify outcome


相似考题
参考答案和解析
正确答案: B
解析: 暂无解析
更多“单选题Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help ident”相关问题
  • 第1题:

    Companycom is purchasing a p5 595 as part of a large server consolidation. They are planning on using micropartitioning and Virtual IO to consolidate small machines. They used the rPerf numbers for AIX 5.3 to size their solutions. They discovered that their application is not yet certified on AIX 5.3, so they will have to use AIX 5.2. What changes should be made to their configuration?()

    • A、Increase memory
    • B、Add more adapters
    • C、Increase both processors and adapters
    • D、Increase the number of processors by 20 - 30%

    正确答案:C

  • 第2题:

    A frustrated and angry customer calls in with a system that does not work. Which of the following is the FIRST course of action for a technician to take?()

    • A、Transfer the customer to another technician, who can allocate more time to the issue.
    • B、Maintain a positive attitude and offer them the cheapest solution possible to satisfy them.
    • C、Listen to what the customer has to say and calmly recommend the best course of action.
    • D、Use technical language to demonstrate knowledge and expertise to the customer.

    正确答案:C

  • 第3题:

    Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?()

    • A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARs
    • B、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it
    • C、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device
    • D、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs

    正确答案:D

  • 第4题:

    Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?()

    • A、Enable SMT
    • B、Reduce the weight
    • C、Renice the process
    • D、Increase the weight

    正确答案:D

  • 第5题:

    Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?()

    • A、Dynamic LPAR
    • B、Workload Manager
    • C、Partition Load Manager
    • D、Shared Processor Pools

    正确答案:C

  • 第6题:

    单选题
    Companycom purchased a new p5 570 without a HMC. The customer does not know how to power the full frame/system off since there does not appear to be an on/off button. What can be done to accomplish this task?()
    A

    Telnet into the machine and do a shutdown -Fr

    B

    Log into ASMI as Administrator and use ASMI menus

    C

    Log into the service processor using WebSM and use ASMI menus

    D

    Use the off button which is located to the left below the LEDs


    正确答案: B
    解析: 暂无解析

  • 第7题:

    单选题
    Companycom has a p5 595 running 12 LPARs. They are interested in high bandwidth, secure communication between two of the LPARs within the p5 595 server. They do not have any unused Ethernet adapters. Which of the following recommendations will best meet this requirement?()
    A

    Utilize the integrated 10/100/1000 network interface

    B

    Implement Virtual Ethernet to enable inter-partition communication

    C

    Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs

    D

    Implement a Point to Point protocol serial communication between the p5 595 serial ports


    正确答案: A
    解析: 暂无解析

  • 第8题:

    单选题
    Companycom has a p5 595 with no DVD configured on this server. How can they install the Virtual IO Server code?()
    A

    From the HMC

    B

    From a NFS mount

    C

    From a FTP server

    D

    From any CD or DVD drive on another server


    正确答案: A
    解析: 暂无解析

  • 第9题:

    单选题
    Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?()
    A

    Use shared memory and semaphores to transfer the data to the TSM LPAR

    B

    Provide gigabit Ethernet adapters in each LPAR and run a crossover cable

    C

    Create a Virtual Ethernet between the production server and the TSM LPARs

    D

    Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs


    正确答案: D
    解析: 暂无解析

  • 第10题:

    单选题
    A company would like to upgrade an old server to a multi-processor box. The server currently has a single 3.0GHz 1Mb cache processor in it with a single empty socket. The only processor that is available from a manufacturer is a 3.0GHz 2Mb cache model. Which of the following is the BEST reason why this upgrade will not work?()
    A

    The socket size does not match

    B

    The cache is from a different manufacturer

    C

    The processors do not match

    D

    Processors cannot be upgraded after server has been deployed


    正确答案: B
    解析: 暂无解析

  • 第11题:

    单选题
    Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?()
    A

    Allocate the CD to the VIO Server and NFS export the CD to the user LPARs

    B

    Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it

    C

    Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device

    D

    Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs


    正确答案: A
    解析: 暂无解析

  • 第12题:

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?()
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案: D
    解析: 暂无解析

  • 第13题:

    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?()

    • A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
    • B、Use DLPAR to move resources from the test LPAR to training when training is active
    • C、Install Partition Load Manager to share resources between the test and training environments
    • D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

    正确答案:D

  • 第14题:

    A company would like to upgrade an old server to a multi-processor box. The server currently has asingle 3.0GHz 1Mb cache processor in it with a single empty socket. The only processor that is available from a manufacturer is a 3.0GHz 2Mb cache model.  Which of the following is the BEST reason why this upgrade will not work?()

    • A、 The socket size does not match
    • B、 The cache is from a different manufacturer
    • C、 The processors do not match
    • D、 Processors cannot be upgraded after server has been deployed

    正确答案:C

  • 第15题:

    A company wants to run multiple applications on an x445 to serve their user base.  OS and application licensing cost is a factor. Which TWO questions will help the specialist decide on the operating environment and the number of processors per server?()

    • A、What are the applications’ scaling (multi-threading) capabilities?
    • B、How does L3 cache size impact application performance?
    • C、How many servers are running the applications today?
    • D、What is the expected size of the data attached to the server in GB’s?
    • E、Will the applications disable the Hyperthreading on the Xeon processor?

    正确答案:A,C

  • 第16题:

    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?()

    • A、Capped and with a lower share
    • B、Uncapped and with a lower share
    • C、Uncapped and with a higher share
    • D、Capped and with no change in share

    正确答案:C

  • 第17题:

    Companycom has a p5 595 running 12 LPARs. They are interested in high bandwidth, secure communication between two of the LPARs within the p5 595 server. They do not have any unused Ethernet adapters. Which of the following recommendations will best meet this requirement?()

    • A、Utilize the integrated 10/100/1000 network interface
    • B、Implement Virtual Ethernet to enable inter-partition communication
    • C、Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs
    • D、Implement a Point to Point protocol serial communication between the p5 595 serial ports

    正确答案:B

  • 第18题:

    单选题
    Companycom is purchasing a p5 595 as part of a large server consolidation. They are planning on using micropartitioning and Virtual IO to consolidate small machines. They used the rPerf numbers for AIX 5.3 to size their solutions. They discovered that their application is not yet certified on AIX 5.3, so they will have to use AIX 5.2. What changes should be made to their configuration?()
    A

    Increase memory

    B

    Add more adapters

    C

    Increase both processors and adapters

    D

    Increase the number of processors by 20 - 30%


    正确答案: A
    解析: 暂无解析

  • 第19题:

    单选题
    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?()
    A

    Capped and with a lower share

    B

    Uncapped and with a lower share

    C

    Uncapped and with a higher share

    D

    Capped and with no change in share


    正确答案: D
    解析: 暂无解析

  • 第20题:

    单选题
    A company would like to upgrade an old server to a multi-processor box. The server currently has asingle 3.0GHz 1Mb cache processor in it with a single empty socket. The only processor that is available from a manufacturer is a 3.0GHz 2Mb cache model.  Which of the following is the BEST reason why this upgrade will not work?()
    A

     The socket size does not match

    B

     The cache is from a different manufacturer

    C

     The processors do not match

    D

     Processors cannot be upgraded after server has been deployed


    正确答案: B
    解析: 暂无解析

  • 第21题:

    单选题
    A frustrated and angry customer calls in with a system that does not work. Which of the following is the FIRST course of action for a technician to take?()
    A

    Transfer the customer to another technician, who can allocate more time to the issue.

    B

    Maintain a positive attitude and offer them the cheapest solution possible to satisfy them.

    C

    Listen to what the customer has to say and calmly recommend the best course of action.

    D

    Use technical language to demonstrate knowledge and expertise to the customer.


    正确答案: B
    解析: 暂无解析

  • 第22题:

    单选题
    Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?()
    A

    Dynamic LPAR

    B

    Workload Manager

    C

    Partition Load Manager

    D

    Shared Processor Pools


    正确答案: C
    解析: 暂无解析

  • 第23题:

    单选题
    Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?()
    A

    Enable SMT

    B

    Reduce the weight

    C

    Renice the process

    D

    Increase the weight


    正确答案: B
    解析: 暂无解析