单选题Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）A The

题目
单选题
Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）
A

The resources must be unallocated in an LPAR

B

The microcode on the pSeries must be current

C

All network adapters on the LPAR must be defined

D

Network connectivity and name resolution capability between HMC and LPARs

相似考题

1.In order for DLPAR operations to be possible, the RMC daemons on the Hardware Management Console (HMC) must communicate with the RMC daemons on all of the LPARs involved. How can the RMC daemons be restarted on the HMC, causing the least disruption?（）A、Run "/usr/sbin/rsct/bin/rmcctrl z" as hscroot. B、Reboot the HMC, either through the GUI or via the command line. C、Disable and re-enable RMC in the Firewall settings in the HMC GUI. D、Select the "Partition Communication" checkbox in the LAN Adapter dialogue box.

2. Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC. What is the probable cause?（）A、APV key is not registeredB、Networking and DNS are not configuredC、/etc/hosts table on HMC is not configuredD、Virtual IO Server dose not support DLPAR

3. Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）A、The resources must be unallocated in an LPARB、The microcode on the pSeries must be currentC、All network adapters on the LPAR must be definedD、Network connectivity and name resolution capability between HMC and LPARs

4. Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARSB、Use DLPAR to move resources from the test LPAR to training when training is activeC、Install Partition Load Manager to share resources between the test and training environmentsD、Install Advanced Power Virtualization and then use micro-partitioning for both the test and training LPARs

更多“单选题Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）A The”相关问题

  • 第1题：

    Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary. What is necessary for communication between the LPARs and the HMC?（）

    • A、An administrative VLAN with port 1808
    • B、Port 657 which must remain open to TCP/IP and UDP traffic
    • C、Network addresses are provided by DHCP services on the network
    • D、DHCP on the HMC is required to be on to communicate between LPAR and HMC

    正确答案:B

  • 第2题：

    Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）

    • A、An 8-port adapter to the HMC
    • B、A hub for the private network
    • C、An additional Ethernet card to the HMC
    • D、An additional Ethernet card for each partition

    正确答案:B

  • 第3题：

    Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times， the total workload between the partitions does NOT exceed the capacity of the server. However， the partitions are not able to utilize the full capacity of the system during peak times， because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources？（）

    • A、Configure AIX Workload Manager
    • B、Configure Partition Load Manager
    • C、Configure eServer Workload Manager
    • D、Use DLPAR from the HMC

    正确答案:B

  • 第4题：

    Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）

    • A、Include a new HMC in the order to connect to the p5 595
    • B、Include a pair of new HMCs in the order to connect to the p5 595
    • C、Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities
    • D、Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to  POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities

    正确答案:B

  • 第5题：

    单选题
    In order for DLPAR operations to be possible, the RMC daemons on the Hardware Management Console (HMC) must communicate with the RMC daemons on all of the LPARs involved. How can the RMC daemons be restarted on the HMC, causing the least disruption?（）
    A

    Run /usr/sbin/rsct/bin/rmcctrl z as hscroot. 

    B

    Reboot the HMC, either through the GUI or via the command line. 

    C

    Disable and re-enable RMC in the Firewall settings in the HMC GUI. 

    D

    Select the Partition Communication checkbox in the LAN Adapter dialogue box.


    正确答案： B
    解析： 暂无解析

  • 第6题：

    单选题
    Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）
    A

    An 8-port adapter to the HMC

    B

    A hub for the private network

    C

    An additional Ethernet card to the HMC

    D

    An additional Ethernet card for each partition


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    Companycom has a p5 595 running 12 LPARs. They are interested in high bandwidth, secure communication between two of the LPARs within the p5 595 server. They do not have any unused Ethernet adapters. Which of the following recommendations will best meet this requirement?（）
    A

    Utilize the integrated 10/100/1000 network interface

    B

    Implement Virtual Ethernet to enable inter-partition communication

    C

    Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs

    D

    Implement a Point to Point protocol serial communication between the p5 595 serial ports


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom is migrating from p670 systems running AIX 5.2 to p5 595 systems running AIX 5.3. They will be changing out only the system units. They will re-use the existing 61D drawers and adapters with the new p5 595 systems. What compatibility issue must be considered?（）
    A

    APV features are not supported for some legacy POWER4 adapters

    B

    APV will require the most current maintenance level for AIX 5.2

    C

    APV features will require that legacy POWER4 adapters be updated with new microcode

    D

    The Virtual IO Server must run AIX 5.3 and the LPARs can run either AIX 5.2 or AIX 5.3


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC. What is the probable cause?（）
    A

    APV key is not registered

    B

    Networking and DNS are not configured

    C

    /etc/hosts table on HMC is not configured

    D

    Virtual IO Server dose not support DLPAR


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）
    A

    The routes on the HMC

    B

    The firewall setting of the LAN adapter

    C

    The name resolution protocol on the p5 590 server

    D

    The subnet mask settings on the Ethernet adapters


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom wants to deploy WebSphere in an HACMP environment, running on two servers in LPARs. These servers will also host the test and dev LPARs. The customer would like to use the test and dev resources to support an HACMP failover. What is the best way to accomplish this task?（）
    A

    Run the test and dev LPARs in an uncapped mode

    B

    Activate COD resources if a failover should occur

    C

    Use DLPAR to move resources between the test and dev and the HACMP LPAR

    D

    Stop the test and dev environments， bring up new profile for HACMP failover


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Companycom is migrating from p670 systems running AIX 5.2 to p5 595 systems running AIX 5.3. They will be changing out only the system units. They will re-use the existing 61D drawers and adapters with the new p5 595 systems. What compatibility issue must be considered?（） 

    • A、APV features are not supported for some legacy POWER4 adapters
    • B、APV will require the most current maintenance level for AIX 5.2
    • C、APV features will require that legacy POWER4 adapters be updated with new microcode
    • D、The Virtual IO Server must run AIX 5.3 and the LPARs can run either AIX 5.2 or AIX 5.3

    正确答案:A

  • 第14题：

    Companycom wants to deploy WebSphere in an HACMP environment, running on two servers in LPARs. These servers will also host the test and dev LPARs. The customer would like to use the test and dev resources to support an HACMP failover. What is the best way to accomplish this task?（）

    • A、Run the test and dev LPARs in an uncapped mode
    • B、Activate COD resources if a failover should occur
    • C、Use DLPAR to move resources between the test and dev and the HACMP LPAR
    • D、Stop the test and dev environments， bring up new profile for HACMP failover

    正确答案:C

  • 第15题：

    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）

    • A、The routes on the HMC
    • B、The firewall setting of the LAN adapter
    • C、The name resolution protocol on the p5 590 server
    • D、The subnet mask settings on the Ethernet adapters

    正确答案:B

  • 第16题：

    Companycom has a p5 595 running 12 LPARs. They are interested in high bandwidth, secure communication between two of the LPARs within the p5 595 server. They do not have any unused Ethernet adapters. Which of the following recommendations will best meet this requirement?（）

    • A、Utilize the integrated 10/100/1000 network interface
    • B、Implement Virtual Ethernet to enable inter-partition communication
    • C、Implement shared Ethernet with the Ethernet adapters utilized in the other LPARs
    • D、Implement a Point to Point protocol serial communication between the p5 595 serial ports

    正确答案:B

  • 第17题：

    单选题
    Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）
    A

    Include a new HMC in the order to connect to the p5 595

    B

    Include a pair of new HMCs in the order to connect to the p5 595

    C

    Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities

    D

    Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to  POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities


    正确答案： B
    解析： 暂无解析

  • 第18题：

    单选题
    A client has an existing p5 570 that is directly connected to a HMC. The customer will be purchasing another p5 570. Which of the following solutions would be appropriate to provide HMC connectivity to the second p5 570?（）
    A

    Implement a proxy server to provide multiple sources to one destination 

    B

    Purchase an additional Ethernet adapter for each p5 570 to provide connectivity between the two 

    C

    Purchase a network hub or switch so both p5 570s can connect to the single HMC 

    D

    Purchase an additional HMC since multiple HMC are required when more than one POWER5 Enterprise class server is used Purchase an additional HMC since multiple HMC? are required when more than one POWER5 Enterprise class server is used


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）
    A

    The resources must be unallocated in an LPAR

    B

    The microcode on the pSeries must be current

    C

    All network adapters on the LPAR must be defined

    D

    Network connectivity and name resolution capability between HMC and LPARs


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary. What is necessary for communication between the LPARs and the HMC?（）
    A

    An administrative VLAN with port 1808

    B

    Port 657 which must remain open to TCP/IP and UDP traffic

    C

    Network addresses are provided by DHCP services on the network

    D

    DHCP on the HMC is required to be on to communicate between LPAR and HMC


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times， the total workload between the partitions does NOT exceed the capacity of the server. However， the partitions are not able to utilize the full capacity of the system during peak times， because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources？（）
    A

    Configure AIX Workload Manager

    B

    Configure Partition Load Manager

    C

    Configure eServer Workload Manager

    D

    Use DLPAR from the HMC


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?（）
    A

    Dynamic LPAR

    B

    Workload Manager

    C

    Partition Load Manager

    D

    Shared Processor Pools


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Which of the following is a situation where dual （redundant） HMCs are recommended（）？
    A

    When managing more than four VIO servers.

    B

    When installed with Power 570 and larger hardware.

    C

    When hosting both Linux and AIX on the same physical hardware.

    D

    When unexpected outage on a single HMC would prove an untenable risk for the hosted LPARs.


    正确答案： B
    解析： 暂无解析

相关内容