单选题Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrai

题目
单选题
Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）
A

Capped and with a lower share

B

Uncapped and with a lower share

C

Uncapped and with a higher share

D

Capped and with no change in share

相似考题

1. Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help identify the processor requirement?（）A、Activate the Trial COD for the processors and run a test to verify outcomeB、Activate the On/Off COD for the processors and run a test to verify outcomeC、Use rmss to simulate the processor workload and run a test to verify outcomeD、Use rmps to simulate the processor workload and run a test to verify outcome

2.Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）A、Create two virtual adapters on the client， each one from a separate Virtual IO ServerB、Enable dead gateway detection on the client so that the network traffic can be reroutedC、Have a spare network card on standby in the client in case the Virtual IO Server goes downD、Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Servers

3. Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）A、Use shared memory and semaphores to transfer the data to the TSM LPARB、Provide gigabit Ethernet adapters in each LPAR and run a crossover cableC、Create a Virtual Ethernet between the production server and the TSM LPARsD、Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs

4.Which Virtual IO Server function allows disk to be shared by multiple LPARs?（）A、Virtual LANB、Virtual diskC、Virtual SCSID、Virtual serial

参考答案和解析
正确答案： C
解析： 暂无解析
更多“单选题Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrai”相关问题

  • 第1题：

    How can dedicated processors be differentiated from virtual processors from a physical processor viewpoint?（）

    • A、Dedicated and never Virtual processors are used in Virtual IO Servers partitions
    • B、Dedicated processors are whole processors that are assigned to a single partition
    • C、Dedicated processors are fractions of whole processors that are dedicated to a single  partition
    • D、Dedicated and Virtual processors are interchangeable concepts, both are whole physical  processors used in virtual and dedicated LPARs

    正确答案:B

  • 第2题：

    How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?（）

    • A、Dedicated processors are fractions of whole processors that are dedicated to a single partition. 
    • B、Virtual processors are the whole number of concurrent operations that the operating system can use. 
    • C、Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions. 
    • D、Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.

    正确答案:B

  • 第3题：

    Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak.  What is the best configuration to fully utilize the processor resource?（）

    • A、Set up the server in SMP mode and use WLM to manage resources effectively
    • B、Set up eight dedicated LPARs and use DLPAR to manage resources effectively
    • C、Set up a shared pool with eight capped LPARs including production and test/dev
    • D、Set up a shared pool with eight uncapped LPARs with priority weight to Production

    正确答案:D

  • 第4题：

    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）

    • A、Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.
    • B、Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.
    • C、Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.
    • D、Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.

    正确答案:C

  • 第5题：

    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）

    • A、Reallocate the Virtual IO Server disks to the user LPAR
    • B、Create a stripe-group within the Virtual IO Server to protect against disk failure
    • C、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
    • D、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers

    正确答案:D

  • 第6题：

    单选题
    Which Virtual IO Server function allows disk to be shared by multiple LPARs?（）
    A

    Virtual LAN

    B

    Virtual disk

    C

    Virtual SCSI

    D

    Virtual serial


    正确答案： B
    解析： 暂无解析

  • 第7题：

    单选题
    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）
    A

    Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.

    B

    Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.

    C

    Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.

    D

    Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom will be using the Virtual IO Server to share both FC and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered?（）
    A

    Shared Ethernet Adapters and Virtual SCSI services require separate Virtual IO Servers.

    B

    Virtualized adapters require essentially the same Virtual IO Server resources regardless of adapter type.

    C

    Shared Ethernet Adapters require significantly more Virtual IO Server resources than Virtual SCSI services.

    D

    Virtual SCSI services require significantly more Virtual IO Server resources than Shared Ethernet Adapters.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）
    A

    Capped and with a lower share

    B

    Uncapped and with a lower share

    C

    Uncapped and with a higher share

    D

    Capped and with no change in share


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    How can dedicated processors be differentiated from virtual processors from a physical processor viewpoint?（）
    A

    Dedicated and never Virtual processors are used in Virtual IO Servers partitions

    B

    Dedicated processors are whole processors that are assigned to a single partition

    C

    Dedicated processors are fractions of whole processors that are dedicated to a single  partition

    D

    Dedicated and Virtual processors are interchangeable concepts, both are whole physical  processors used in virtual and dedicated LPARs


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）
    A

    Create two virtual adapters on the client， each one from a separate Virtual IO Server

    B

    Enable dead gateway detection on the client so that the network traffic can be rerouted

    C

    Have a spare network card on standby in the client in case the Virtual IO Server goes down

    D

    Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two  separate Virtual IO Servers


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）
    A

    Allocate the CD to the VIO Server and NFS export the CD to the user LPARs

    B

    Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it

    C

    Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device

    D

    Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs


    正确答案： A
    解析： 暂无解析

  • 第13题：

    A customer has a 16-core Power 570 with 64 GB RAM. They have 2 VIO servers and 4 LPARs， all running very heavy database applications. Storage is virtualized. The storage is SAN based and configured via MultiPath IO on the LPARs. The users are complaining about poor  performance. The VIO servers are reporting low CPU load and little memory usage. The LPARs show 100% disk busy time and are running very slowly， approximately 6-10MB/sec. The SAN reports LUN utilization of less that 20% busy time.  What should be done to resolve this problem？ （）

    • A、 Configure MPIO load balancing on the LPARs.
    • B、 Increase the SCSI queue depth per hdisk device.
    • C、 Increase the number of virtual SCSI devices per LPAR by 2.
    • D、 Increase the path priority on both virtual SCSI devices on the LPARs.

    正确答案:B

  • 第14题：

    A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）

    • A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.
    • B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.
    • C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.
    • D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

    正确答案:D

  • 第15题：

    Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）

    • A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARs
    • B、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import it
    • C、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI device
    • D、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs

    正确答案:D

  • 第16题：

    Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?（）

    • A、Enable SMT
    • B、Reduce the weight
    • C、Renice the process
    • D、Increase the weight

    正确答案:D

  • 第17题：

    Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained. How should the Virtual IO Server's shared processor LPAR be configured?（）

    • A、Capped and with a lower share
    • B、Uncapped and with a lower share
    • C、Uncapped and with a higher share
    • D、Capped and with no change in share

    正确答案:C

  • 第18题：

    单选题
    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
    A

    Reallocate the Virtual IO Server disks to the user LPAR

    B

    Create a stripe-group within the Virtual IO Server to protect against disk failure

    C

    Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk

    D

    Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help identify the processor requirement?（）
    A

    Activate the Trial COD for the processors and run a test to verify outcome

    B

    Activate the On/Off COD for the processors and run a test to verify outcome

    C

    Use rmss to simulate the processor workload and run a test to verify outcome

    D

    Use rmps to simulate the processor workload and run a test to verify outcome


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?（）
    A

    Enable SMT

    B

    Reduce the weight

    C

    Renice the process

    D

    Increase the weight


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak.  What is the best configuration to fully utilize the processor resource?（）
    A

    Set up the server in SMP mode and use WLM to manage resources effectively

    B

    Set up eight dedicated LPARs and use DLPAR to manage resources effectively

    C

    Set up a shared pool with eight capped LPARs including production and test/dev

    D

    Set up a shared pool with eight uncapped LPARs with priority weight to Production


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）
    A

    Use shared memory and semaphores to transfer the data to the TSM LPAR

    B

    Provide gigabit Ethernet adapters in each LPAR and run a crossover cable

    C

    Create a Virtual Ethernet between the production server and the TSM LPARs

    D

    Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    How can virtual processors be differentiated from dedicated processors from a physical processor viewpoint?（）
    A

    Dedicated processors are fractions of whole processors that are dedicated to a single partition. 

    B

    Virtual processors are the whole number of concurrent operations that the operating system can use. 

    C

    Virtual processors and not dedicated processors are processors used in Virtual IO Server partitions. 

    D

    Virtual processors and dedicated processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?（）
    A

    Enable SMT

    B

    Reduce the weight

    C

    Renice the process

    D

    Increase the weight


    正确答案： B
    解析： 暂无解析

相关内容