单选题A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）A Configure the RSA with an IP addressB Conf

题目
单选题
A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）
A

Configure the RSA with an IP address

B

Configure the BMC with an IP address

C

Configure the AMM with an IP address

D

Configure the IMM with an IP address

相似考题

1.you configure a new file server that runs windows server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files.The TCP/IP properties for the file server are configured as shown in the following exhibit.You need to ensure that users are able to access the shared files. What should you do?（）A.Configure a static IP address.B.Configure the default gateway.C.Configure the DNS server address.D.Add the domain to the DNS suffix on the network interface.

2.When making changes to a server, which of the following is the BEST way to troubleshoot a problem?()A. Perform root cause analysis and then test the theory to determine the cause.B. Make changes to the system and document everything once the problem is resolved.C. Make multiple changes to all affected areas to resolve all potential issues.D. Make a change and if the problem is not resolved, reverse the change.

3.You are the administrator of Microsoft Windows 2000 computer. You are preparing to install SQL Server 2000 on the computer.Your company contains a variety of client computers that will connect to the SQL server 2000 computer by using a specific Net-Library, as shown in the following table.You need to allow the client computers to connect to the SQL Server 2000 computer. You also want to minimize the number of configuration changes required on the client computers.Which three actions should you take? (Each correct answer presents part of the solution. Choose three)A. Install SQL Server 2000 as a named instance.B. Install SQL Server 2000 as the default instance.C. Configure the new instance for Mixed Mode Authentication.D. Configure the new instance for Windows Authentication.E. Configure the server to use the Named Pipes, IPX/SPX, and TCP/IP Net-Libraries.F. Configure the server to use the Multiprotocol Net-Library.

4.Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client? ()A. You do not need to configure a RADIUS client policy.B. You must know the exact model number of the Infranet Enforcer.C. You must specify the NACN password of the device in the RADIUS client policy.D. You do not need to designate a location group to which the Infranet Enforcer will belong.

更多“单选题A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）A Configure the RSA with an IP addressB Conf”相关问题

  • 第1题：

    You have a computer that runs Windows Vista.You need to configure the computer to meet the following requirements:·You must be able to make configuration changes remotely.·You must be able to make the changes without the permission of the locally logged-on user.What should you do?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：A

  • 第2题：

    The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems (Choose two.)()。

    A.Configure the gateway on Host A as 10.1.1.1

    B.Configure the gateway on Host B as 10.1.2.254

    C.Configure the IP address of Host A as 10.1.2.2

    D.Configure the IP address of Host B as 10.1.2.2

    E.Configure the masks on both hosts to be 255.255.255.224

    F.Configure the masks on both hosts to be 255.255.255.240


    参考答案：B, D

  • 第3题：

    Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client? （）

    • A、You do not need to configure a RADIUS client policy.
    • B、You must know the exact model number of the Infranet Enforcer.
    • C、You must specify the NACN password of the device in the RADIUS client policy.
    • D、You do not need to designate a location group to which the Infranet Enforcer will belong.

    正确答案:A

  • 第4题：

    You install Microsoft Windows Vista on a new computer. The computer has the following hardware configuration：  2.4-GHz processor  2 GB of RAM  512-MB video adapter  250-GB hard disk.  You are unable to view the following features of Windows Vista：  Thumbnails  Previews on folders  Transparent glass.  You need to be able to view the advanced visual features of Windows Vista.  What should you do？（）

    • A、Press the ALT key and the TAB key simultaneously.
    • B、Press the WINDOWS key and the TAB key simultaneously.
    • C、Configure the system properties to optimize for applications.
    • D、Configure the system properties to optimize for best appearance.

    正确答案:D

  • 第5题：

    Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? （）(Choose three.)

    • A、start LDP
    • B、enable CEF switching
    • C、configure the MPLS ID
    • D、disable IP TTL propagation
    • E、configure conditional label advertising
    • F、enable label switching on frame mode interfaces

    正确答案:A,B,F

  • 第6题：

    A customer purchases a virtual media key on a x3650 M3. They ask where to install the key. Which of the following provides the correct answer？（）

    • A、Problem Determination and Service Guide
    • B、xRef
    • C、ServerGuide Hardware Reference
    • D、COG

    正确答案:A

  • 第7题：

    You need to ensure the Client dimension is able to support new orders and new client records. Which setting should you configure?（）

    • A、ROLAP storage
    • B、Lazy aggregations
    • C、Write Enabled property
    • D、Unknown Member functionality

    正确答案:A

  • 第8题：

    单选题
    Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client? （）
    A

    You do not need to configure a RADIUS client policy.

    B

    You must know the exact model number of the Infranet Enforcer.

    C

    You must specify the NACN password of the device in the RADIUS client policy.

    D

    You do not need to designate a location group to which the Infranet Enforcer will belong.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    You work in a company which is named Wiikigo Corp. The company uses SQL Server 2008. You are the administrator of the company database. Now you are in charge of a SQL Server 2008 instance. Now your company CIO assigns a task to you. The company CIO wants you to configure FILESTREAM data and the two requirements below must be met: you must enable FILESTREAM for file I/O streaming access; remote client computers must be able to have streaming access to FILESTREAM data. You must make sure that FILESTREAM data is enabled. Which service should you configure? （）
    A

    You should configure SQL Server VSS Writer 

    B

    You should configure Distributed File System 

    C

    You should configure SQL Server 

    D

    You should configure SQL Server Full Text


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）
    A

    Configure the RSA with an IP address

    B

    Configure the BMC with an IP address

    C

    Configure the AMM with an IP address

    D

    Configure the IMM with an IP address


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The   internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal  interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1  èEnding IP address： 172.16.7.255  èSubnet mask： 255.255.240.0   You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal  network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP  address. How should you configure DHCP2？（）
    A

    Create a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of  172.16.8.1 and an ending IP address of 172.16.15.254.

    B

    Create a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of  172.16.0.1 and an ending IP address of 172.16.15.254.

    C

    Create a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of  172.16.8.1 and an ending IP address of 172.16.10.254.

    D

    Create a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of  172.17.0.1 and an ending IP address of 172.17.255.254.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    When making changes to a server， which of the following is the BEST way to troubleshoot a problem？（）
    A

     Perform root cause analysis and then test the theory to determine the cause.

    B

     Make changes to the system and document everything once the problem is resolved.

    C

     Make multiple changes to all affected areas to resolve all potential issues.

    D

     Make a change and if the problem is not resolved， reverse the change.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? ()(Choose three.)

    A. start LDP

    B. enable CEF switching

    C. configure the MPLS ID

    D. disable IP TTL propagation

    E. configure conditional label advertising

    F. enable label switching on frame mode interfaces


    参考答案：A, B, F

  • 第14题：

    A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）

    • A、Configure the RSA with an IP address
    • B、Configure the BMC with an IP address
    • C、Configure the AMM with an IP address
    • D、Configure the IMM with an IP address

    正确答案:D

  • 第15题：

    Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The   internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal  interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1  èEnding IP address： 172.16.7.255  èSubnet mask： 255.255.240.0   You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal  network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP  address. How should you configure DHCP2？（） 

    • A、Create a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of  172.16.8.1 and an ending IP address of 172.16.15.254.
    • B、Create a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of  172.16.0.1 and an ending IP address of 172.16.15.254.
    • C、Create a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of  172.16.8.1 and an ending IP address of 172.16.10.254.
    • D、Create a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of  172.17.0.1 and an ending IP address of 172.17.255.254.

    正确答案:A

  • 第16题：

    Which of the following SMIT panel screens are used to configure a system’s basic network parameters for the very first time only？（）

    • A、Change System User Interface
    • B、TCP/IP Further Configuration
    • C、TCP/IP Minimum Configuration
    • D、Network Installation Management

    正确答案:C

  • 第17题：

    When making changes to a server， which of the following is the BEST way to troubleshoot a problem？（）

    • A、 Perform root cause analysis and then test the theory to determine the cause.
    • B、 Make changes to the system and document everything once the problem is resolved.
    • C、 Make multiple changes to all affected areas to resolve all potential issues.
    • D、 Make a change and if the problem is not resolved， reverse the change.

    正确答案:D

  • 第18题：

    you configure a new file server that runs windows server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files.The TCP/IP properties for the file server are configured as shown in the following exhibit.You need to ensure that users are able to access the shared files. What should you do?（）

    • A、Configure a static IP address.
    • B、Configure the default gateway.
    • C、Configure the DNS server address.
    • D、Add the domain to the DNS suffix on the network interface.

    正确答案:A

  • 第19题：

    You configure a new file server that runs Windows Server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files. The TCP/IP properties for the file server are configured as shown in the following exhibit.（exhibit not there again wtf!） You need to ensure that users are able to access the shared files. How should you configure the TCP/IP properties in the file server？（）

    • A、Configure a static IP address
    • B、Configure the default gateway
    • C、Configure the DNS server address
    • D、Add the domain to the DNS suffix on the network interface

    正确答案:A

  • 第20题：

    单选题
    A technician is installing a basic router for a SOHO network. After installing the router the PCs connected to it are not able to acquire an IP address. Which of the following did the technician fail to configure correctly？（）
    A

    DHCP

    B

    DNS

    C

    WINS

    D

    NAT


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following SMIT panel screens are used to configure a system’s basic network parameters for the very first time only？（）
    A

    Change System User Interface

    B

    TCP/IP Further Configuration

    C

    TCP/IP Minimum Configuration

    D

    Network Installation Management


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    You need to ensure the Client dimension is able to support new orders and new client records. Which setting should you configure?（）
    A

    ROLAP storage

    B

    Lazy aggregations

    C

    Write Enabled property

    D

    Unknown Member functionality


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    A customer purchases a virtual media key on a x3650 M3. They ask where to install the key. Which of the following provides the correct answer？（）
    A

    Problem Determination and Service Guide

    B

    xRef

    C

    ServerGuide Hardware Reference

    D

    COG


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following files should an administrator modify to configure dynamic caching？（）
    A

    dynacache.xml

    B

    cachespec.xml

    C

    dynacache.conf

    D

    cachemon.xml

    E

    cachespec.conf


    正确答案： D
    解析： 暂无解析

相关内容