单选题The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is t

题目
单选题
The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）
A

 The SCSI card is not seated correctly.

B

 The termination is incorrectly set on the SCSI card.

C

 The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.

D

 Operating system patches were not updated before installing the card.

相似考题

1.A graphics card has been added and the system rebooted. When running the lsdev－Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?()A.Reboot system sing the mkdev -l command.B.Install device support suing the cfgmgr -i command.C.Use the SMIT console to redirect the console.D.Use SMIT devices and choose the correct adapter.

2.A server is having problems booting into the operating system. Which of the following can provide important information to begin to troubleshoot the cause?（）A、System logsB、Firmware updatesC、POST messagesD、Application logs

3. You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

4.An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）A、Move the RAID adapter to another slot.B、Perform a baseline of the system.C、Contact the reseller of the adapter for a replacement card.D、Check the RAID adapter’s manufacturer for the latest drivers.

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is t”相关问题

  • 第1题：

    Before installing an operating system on a server， which of the following is the BEST resource for an administrator to review the compatibility of the OS with the video card？（）

    • A、Server manual
    • B、Manufacturer website
    • C、IEEE standards
    • D、HCL

    正确答案:D

  • 第2题：

    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

    • A、 SCSI cable
    • B、 SCSI interface adapter on the tape library
    • C、 SCSI termination card on the server
    • D、 iSCSI cable

    正确答案:A

  • 第3题：

    A server is having problems booting into the operating system.  Which of the following can provide important information to begin to trouble shoot the cause？（）

    • A、 System logs
    • B、 Firmware updates
    • C、 POST messages
    • D、 Application logs

    正确答案:C

  • 第4题：

    The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）

    • A、 The SCSI card is not seated correctly.
    • B、 The termination is incorrectly set on the SCSI card.
    • C、 The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.
    • D、 Operating system patches were not updated before installing the card.

    正确答案:C

  • 第5题：

    A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?（）

    • A、Reboot system sing the mkdev -l command.
    • B、Install device support suing the cfgmgr -i command.
    • C、Use the SMIT console to redirect the console.
    • D、Use SMIT devices and choose the correct adapter.

    正确答案:B

  • 第6题：

    Which of the following BEST describes the initial process of setting up a new operating system from a CD-ROM? （）

    • A、Format a partition, install device drivers, and install the operating system.
    • B、Create a partition, format the partition, and install the operating system.
    • C、Install the operating system, create a partition, and install device drivers.
    • D、Install the operating system, install device drivers, and create a partition.

    正确答案:B

  • 第7题：

    单选题
    A blade server has been configured to boot from SAN.  After an HBA firmware upgrade the blade was rebooted and cannot find the operating system.  Which of the following should the administrator do NEXT to troubleshoot the issue？（）
    A

    Verify all HBA settings.

    B

    Upgrade the blade firmware.

    C

    Upgrade the OS level HBA drivers.

    D

    Set the system to boot from the local disk.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）
    A

    Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.

    B

    Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.

    C

    Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.

    D

    Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）
    A

     Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 

    B

     Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 

    C

     Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 

    D

     Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）
    A

     0

    B

     1

    C

     4

    D

     7


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）

    • A、 0
    • B、 1
    • C、 4
    • D、 7

    正确答案:D

  • 第14题：

    You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）

    • A、 SCSI-1 supports only 8 devices including the adaptor.
    • B、 SCSI-1 supports only 6 disks per adaptor.
    • C、 There is a SCSI-ID conflict that causes that problem.
    • D、 You forgot to set the SCSI-ID #8 for the new disk.

    正确答案:A

  • 第15题：

    A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? （）

    • A、The monitor cannot display the increased resolution that is a feature of the new graphics card.
    • B、The power supply does not provide enough wattage to power the new graphics card.
    • C、The new graphics card is incompatible with the existing processor.
    • D、The computer does not have enough RAM to support the new graphics card.

    正确答案:B

  • 第16题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第17题：

    Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）

    • A、Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
    • B、Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
    • C、Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
    • D、Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

    正确答案:D

  • 第18题：

    单选题
    A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?（）
    A

    Reboot system sing the mkdev -l command.

    B

    Install device support suing the cfgmgr -i command.

    C

    Use the SMIT console to redirect the console.

    D

    Use SMIT devices and choose the correct adapter.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? （）
    A

    The monitor cannot display the increased resolution that is a feature of the new graphics card.

    B

    The power supply does not provide enough wattage to power the new graphics card.

    C

    The new graphics card is incompatible with the existing processor.

    D

    The computer does not have enough RAM to support the new graphics card.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）
    A

     SCSI cable

    B

     SCSI interface adapter on the tape library

    C

     SCSI termination card on the server

    D

     iSCSI cable


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following BEST describes the initial process of setting up a new operating system from a CD-ROM? （）
    A

    Format a partition, install device drivers, and install the operating system.

    B

    Create a partition, format the partition, and install the operating system.

    C

    Install the operating system, create a partition, and install device drivers.

    D

    Install the operating system, install device drivers, and create a partition.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Before installing an operating system on a server， which of the following is the BEST resource for an administrator to review the compatibility of the OS with the video card？（）
    A

    Server manual

    B

    Manufacturer website

    C

    IEEE standards

    D

    HCL


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）
    A

     SCSI-1 supports only 8 devices including the adaptor.

    B

     SCSI-1 supports only 6 disks per adaptor.

    C

     There is a SCSI-ID conflict that causes that problem.

    D

     You forgot to set the SCSI-ID #8 for the new disk.


    正确答案： D
    解析： 暂无解析

相关内容