单选题After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）Areplace the NICBinstall the latest SSU （System Setup Uti

题目
单选题
After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）
A

 replace the NIC

B

 install the latest SSU （System Setup Utility） version

C

 upgrade the firmware on the NIC

D

 assign the NIC a static IRQ in the SSU （System Setup Utility）

相似考题

1.You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.You want to install the customized HAL designed for the computer. What should you do?A．During the text mode portion of the Windows 2000 setup, install the customized HAL.B．After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 SetupC．After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.D．After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.

2.An administrator is troubleshooting a problem on an application server, but has not determined the cause of the problem and is not able to replicate the problem. Which of the following should the administrator do prior to escalating the issue?（）A、Gather information from users.B、Reboot the server.C、Apply the latest service packs to the operating system.D、Perform a root cause analysis

3.An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）A、Move the RAID adapter to another slot.B、Perform a baseline of the system.C、Contact the reseller of the adapter for a replacement card.D、Check the RAID adapter’s manufacturer for the latest drivers.

4.An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware

更多“单选题After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）A  replace the NICB  install the latest SSU （System Setup”相关问题

  • 第1题：

    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）

    • A、Check the backplane cabling.
    • B、Check the server BIOS.
    • C、Update the RAID controller firmware.
    • D、Install the latest hard drive firmware

    正确答案:A

  • 第2题：

    A user is reporting that access to a file server is much slower than it has been. The system administrator completes a test of the server using a system monitoring tool and compares it to the previously taken baseline. The comparison shows that there are no significant changes in the use of system resources. Which of the following actions should be taken to resolve this user problem?（）

    • A、Add additional RAM to the user PC
    • B、Troubleshoot the user PC
    • C、Add additional RAM to the server
    • D、Add additional hard drive space to the server

    正确答案:B

  • 第3题：

    An administrator is configuring one server to monitor hardware level information on a second Windows server.Which of the following should be setup on the Windows server to allow the monitoring server to access this information?（）

    • A、WMI
    • B、RIS
    • C、DNS
    • D、SNMP
    • E、SMTP

    正确答案:A,D

  • 第4题：

    After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）

    • A、 replace the NIC
    • B、 install the latest SSU （System Setup Utility） version
    • C、 upgrade the firmware on the NIC
    • D、 assign the NIC a static IRQ in the SSU （System Setup Utility）

    正确答案:C

  • 第5题：

    An administrator is troubleshooting a problem on an application server， but has not determined the cause of the problem and is not able to replicate the problem.  Which of the following should the administrator do prior to escalating the issue？（）

    • A、 Gather information from users.
    • B、 Reboot the server.
    • C、 Apply the latest service packs to the operating system.
    • D、 Perform a root cause analysis.

    正确答案:A

  • 第6题：

    You have an Exchange Server 2010 Client Access server named CAS1.CAS1 fails.You install a new member server named CAS1 on the network.You need to recover the Client Access server role on CAS1.What should you do？（）

    • A、Restore the Inetsrv folder and the system state from CAS1.
    • B、Restore the Inetpub folder and the system state from CAS1.
    • C、Run Setup /RecoverCMS from the Exchange Server installation source files
    • D、Run Setup /M：RecoverServer from the Exchange Server installation source files

    正确答案:D

  • 第7题：

    单选题
    After upgrading a server motherboard to the latest firmware revision， configuring LAN access in the SSU （System Setup Utility） fails. Which action should be taken FIRST to correct this problem？（）
    A

     replace the NIC

    B

     install the latest SSU （System Setup Utility） version

    C

     upgrade the firmware on the NIC

    D

     assign the NIC a static IRQ in the SSU （System Setup Utility）


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    You have an Exchange Server 2010 Client Access server named CAS1.CAS1 fails.You install a new member server named CAS1 on the network.You need to recover the Client Access server role on CAS1.What should you do？（）
    A

    Restore the Inetsrv folder and the system state from CAS1.

    B

    Restore the Inetpub folder and the system state from CAS1.

    C

    Run Setup /RecoverCMS from the Exchange Server installation source files

    D

    Run Setup /M：RecoverServer from the Exchange Server installation source files


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）
    A

    Check the backplane cabling.

    B

    Check the server BIOS.

    C

    Update the RAID controller firmware.

    D

    Install the latest hard drive firmware


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator is troubleshooting a problem on an application server， but has not determined the cause of the problem and is not able to replicate the problem.  Which of the following should the administrator do prior to escalating the issue？（）
    A

     Gather information from users.

    B

     Reboot the server.

    C

     Apply the latest service packs to the operating system.

    D

     Perform a root cause analysis.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    An administrator is configuring one server to monitor hardware level information on a second Windows server.Which of the following should be setup on the Windows server to allow the monitoring server to access this information?（）
    A

    WMI

    B

    RIS

    C

    DNS

    D

    SNMP

    E

    SMTP


    正确答案： C,E
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator is troubleshooting a problem on an application server, but has not determined the cause of the problem and is not able to replicate the problem. Which of the following should the administrator do prior to escalating the issue?（）
    A

    Gather information from users.

    B

    Reboot the server.

    C

    Apply the latest service packs to the operating system.

    D

    Perform a root cause analysis


    正确答案： B
    解析： 暂无解析

  • 第13题：

    When experiencing video problems， which of the following should be performed FIRST to ensure that the monitor is not causing the problem？ （）

    • A、Check for the latest video drivers.
    • B、Install a known-good video adapter.
    • C、Attach the monitor to a known-good computer.
    • D、Replace the monitor.

    正确答案:C

  • 第14题：

    A customer’s support technician finished installing their new x366 server running Windows 2003 Enterprise Server and the IBM Director agent.  The customer applied the latest BIOS and firmware drivers available on the Web for the system.  The problem is that the x366 runs for a few minutes and then reboots itself.  Which of the following should be checked first？（）

    • A、Configure the box with RAID-1 and not RAID-5.
    • B、Disable Hyperthreading feature on the machine.
    • C、Ensure the Watchdog timers on the RSA-II are disabled.
    • D、Replace the Windows NTLDR file on the root partition from another copy of the Windows OS files.

    正确答案:C

  • 第15题：

    An administrator is running proprietary server software that requires services to be reconfigured every time the server is upgraded to the latest vendor version. Which of the following is the BEST solution to address this problem?（）

    • A、The current system configuration should be documented for future use.
    • B、Server diagramming and environmental topologies should be documented.
    • C、A copy of the latest pre-installation plan should be developed and utilized.
    • D、Vendor support should be contacted so that they can correct the issue.

    正确答案:D

  • 第16题：

    The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

    • A、System reboot
    • B、Reseat the memory
    • C、Install the latest firmware
    • D、Install the latest driver

    正确答案:B

  • 第17题：

    When installing a wireless access point, which of the following should the technician perform FIRST?（）

    • A、Enable MAC filtering.
    • B、Download and install the latest firmware.
    • C、Disable DHCP.
    • D、Change the default password.

    正确答案:D

  • 第18题：

    单选题
    When installing a wireless access point, which of the following should the technician perform FIRST?（）
    A

    Enable MAC filtering.

    B

    Download and install the latest firmware.

    C

    Disable DHCP.

    D

    Change the default password.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the server is at base AIX 5.3. What action needs to be taken to apply the new technology level to the server？（）
    A

    Run smit update_all

    B

    Run smit install_all

    C

    Boot from the installation media

    D

    Run the update_all command from the mounted CD


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A user is reporting that access to a file server is much slower than it has been. The system administrator completes a test of the server using a system monitoring tool and compares it to the previously taken baseline. The comparison shows that there are no significant changes in the use of system resources. Which of the following actions should be taken to resolve this user problem?（）
    A

    Add additional RAM to the user PC

    B

    Troubleshoot the user PC

    C

    Add additional RAM to the server

    D

    Add additional hard drive space to the server


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator is running proprietary server software that requires services to be reconfigure devery time the server is upgraded to the latest vendor version.  Which of the following is the BEST solution to address this problem？（）
    A

     The current system configuration should be documented for future use.

    B

     Server diagramming and environmental topologies should be documented.

    C

     A copy of the latest pre-installation plan should be developed and utilized.

    D

     Vendor support should be contacted so that they can correct the issue.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator is running proprietary server software that requires services to be reconfigured every time the server is upgraded to the latest vendor version. Which of the following is the BEST solution to address this problem?（）
    A

    The current system configuration should be documented for future use.

    B

    Server diagramming and environmental topologies should be documented.

    C

    A copy of the latest pre-installation plan should be developed and utilized.

    D

    Vendor support should be contacted so that they can correct the issue.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）
    A

     Check the backplane cabling.

    B

     Check the server BIOS.

    C

     Update the RAID controller firmware.

    D

     Install the latest hard drive firmware.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： C
    解析： 暂无解析

相关内容