单选题A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）A0B1C4D7

题目
单选题
A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）
A

 0

B

 1

C

 4

D

 7

相似考题

1.Which of the following are possible SCSI ID ranges on a wide SCSI adapter?()A. 1 - 7B. 1 - 16C. 0 - 7D. 0 - 15

2.A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）A、The card needs to have the compatibility jumpers set before it can be installed into the system.B、The card is a PCI Express card and the laptop supports pcmica.C、The expansion slot needs to be enabled in the blos first.D、The card is a PCMCIA card and the laptop supports PCI Express cards.

3.A technician has installed a new motherboard in a workstation, but after hardware tests, themotherboard has failed. Which of the following should the technician do FIRST before replacingthe motherboard? （）A、Reseat all power connections.B、Remove the CMOS battery.C、Install the graphics card.D、Ground to the case.

4.SCSI总线上可连接7或15个设备，它们是靠给设备分ID号来区分的，并通过（）对SCSI设备进行设置。A、系统BIOS中B、SCSI控制器中的BIOSC、SCSI设备上的跳线D、SCSI设备在电缆上的位置

更多“单选题A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）A  0B  1C  4D  7”相关问题

  • 第1题：

    You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort.  What should you do? （）

    • A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. 
    • B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. 
    • C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI       controller driver with the functional one. 
    • D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional  SCSI controller driver into the original system folder, and restart the computer to the previous installation.

    正确答案:A

  • 第2题：

    A server in a manufacturing environment needs to receive input from multiple measurement devices on the production line. Which of the following would be needed on the server？（）

    • A、HBA card
    • B、SCSI card
    • C、Serial card
    • D、Video card

    正确答案:C

  • 第3题：

    A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）

    • A、 0
    • B、 1
    • C、 4
    • D、 7

    正确答案:D

  • 第4题：

    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

    • A、 SCSI cable
    • B、 SCSI interface adapter on the tape library
    • C、 SCSI termination card on the server
    • D、 iSCSI cable

    正确答案:A

  • 第5题：

    Which of the following are possible SCSI ID ranges on a wide SCSI adapter？（）

    • A、 1 - 7
    • B、 1 - 16
    • C、 0 - 7
    • D、 0 - 15

    正确答案:D

  • 第6题：

    The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）

    • A、 The SCSI card is not seated correctly.
    • B、 The termination is incorrectly set on the SCSI card.
    • C、 The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.
    • D、 Operating system patches were not updated before installing the card.

    正确答案:C

  • 第7题：

    单选题
    The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）
    A

     The SCSI card is not seated correctly.

    B

     The termination is incorrectly set on the SCSI card.

    C

     The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.

    D

     Operating system patches were not updated before installing the card.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    多选题
    Which three should be documented after upgrading a SCSI RAID controller？（）
    A

    disk utilization

    B

    installation date

    C

    adapter baselines

    D

    location slot of the RAID controller

    E

    status of the adapter card installation

    F

    RAID controller information （warranty， specifications etc.）


    正确答案： F,A
    解析： 暂无解析

  • 第9题：

    单选题
    After a technician installs a video card, which of the following should the technician configure NEXT?（）
    A

    Resolution

    B

    Colors

    C

    Dots per inch

    D

    Refresh rate


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）
    A

    The card needs to have the compatibility jumpers set before it can be installed into the system.

    B

    The card is a PCI Express card and the laptop supports pcmica.

    C

    The expansion slot needs to be enabled in the blos first.

    D

    The card is a PCMCIA card and the laptop supports PCI Express cards.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）
    A

     Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 

    B

     Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 

    C

     Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 

    D

     Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following are possible SCSI ID ranges on a wide SCSI adapter？（）
    A

     1 - 7

    B

     1 - 16

    C

     0 - 7

    D

     0 - 15


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

    • A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
    • B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
    • C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
    • D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

    正确答案:A

  • 第14题：

    An administrator needs to connect servers to the Fiber Channel SAN. Which of the following should the administrator install in the servers to allow this connection？（）

    • A、Riser
    • B、HBA
    • C、SCSI card
    • D、SAS card

    正确答案:B

  • 第15题：

    Which three should be documented after upgrading a SCSI RAID controller？（）

    • A、 disk utilization
    • B、 installation date
    • C、 adapter baselines
    • D、 location slot of the RAID controller
    • E、 status of the adapter card installation
    • F、 RAID controller information （warranty， specifications etc.）

    正确答案:B,D,F

  • 第16题：

    You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）

    • A、 SCSI-1 supports only 8 devices including the adaptor.
    • B、 SCSI-1 supports only 6 disks per adaptor.
    • C、 There is a SCSI-ID conflict that causes that problem.
    • D、 You forgot to set the SCSI-ID #8 for the new disk.

    正确答案:A

  • 第17题：

    A technician has replaced a video card with another manufacturer’s video card. The driverinstallation does not complete. Which of the following steps should the technician take FIRST?（）

    • A、Roll back the driver.
    • B、Install the original video card and reboot.
    • C、Delete the monitor.
    • D、Remove the video card and reboot.

    正确答案:A

  • 第18题：

    You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）

    • A、When away from the office use Device Manager to remove the adapter. 
    • B、When away from the office configure the startup properties for the adapter to be automatic. 
    • C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
    • D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

    正确答案:C

  • 第19题：

    单选题
    Which of the following are possible SCSI ID ranges on a wide SCSI adapter?（）
    A

    1 - 7

    B

    1 - 16

    C

    0 - 7

    D

    0 - 15


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）
    A

    When away from the office use Device Manager to remove the adapter. 

    B

    When away from the office configure the startup properties for the adapter to be automatic. 

    C

    Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.

    D

    Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）
    A

     SCSI cable

    B

     SCSI interface adapter on the tape library

    C

     SCSI termination card on the server

    D

     iSCSI cable


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort.  What should you do? （）
    A

    Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. 

    B

    Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. 

    C

    Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI       controller driver with the functional one. 

    D

    Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional  SCSI controller driver into the original system folder, and restart the computer to the previous installation.


    正确答案： C
    解析： The SCSI controller controls the tape device not any hard drives. This makes it possible to boot to Safe Mode and reinstall the functional driver. The SCSI driver could also be disabled in Safe Mode.

  • 第23题：

    单选题
    A technician needs to install the first SCSI controller in an application server. The SCSI card is factory-configured with a SCSI ID of 1. Which SCSI ID should the technician configure the card before installation？（）
    A

     0

    B

     1

    C

     4

    D

     7


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）
    A

     SCSI-1 supports only 8 devices including the adaptor.

    B

     SCSI-1 supports only 6 disks per adaptor.

    C

     There is a SCSI-ID conflict that causes that problem.

    D

     You forgot to set the SCSI-ID #8 for the new disk.


    正确答案： D
    解析： 暂无解析

相关内容