多选题Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions a

题目
多选题
Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions are causing this issue?（）
A

The endpoint is using EAP-PEAP with EAP-GTC as the inner protocol,

B

The endpoint is using EAP-TTLS with EAP-JUAC as the inner protocol.

C

The endpoint is using EAP-FAST with EAP-GTC as the inner protocol,

D

The endpoint is using EAP-PEAP with EAP-JUAC as the inner protocol.

相似考题

1.Your security policy requires that users authenticating to the Junos Pulse Access Control Service are connecting from a domain member endpoint on the internal corporate network.Which set of role access restrictions must you configure to enforce this security policy?（）A. Source IP and browserB. Source IP and certificateC. Certificate and Host CheckerD. Host Checker and source IP

2.You are validating the configuration of your SRX Series device and see the output shown below.What does this indicate?()A.The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.B.The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.C.The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.D.Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.

3.You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI).To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）A. CLIB. WebUIC. NSMD. Junos Pulse Access Control Service

4.Your IT director has decided to allow employees to use their laptops at home as well as in the office. You have deployed the Junos Pulse client to allow access to the offices 802.1X-enabled wired network. Your company also has the Junos Pulse Secure Access Service deployed. You want the Junos Pulse client to automatically launch the appropriate access method depending on each users location.Which three are supported to determine the users location?（）A. MAC addressB. DNS serverC. DHCP serverD. resolve addressE. endpoint address

更多“多选题Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions a”相关问题

  • 第1题：

    Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions are causing this issue?（）

    A. The endpoint is using EAP-PEAP with EAP-GTC as the inner protocol,

    B. The endpoint is using EAP-TTLS with EAP-JUAC as the inner protocol.

    C. The endpoint is using EAP-FAST with EAP-GTC as the inner protocol,

    D. The endpoint is using EAP-PEAP with EAP-JUAC as the inner protocol.


    参考答案：A, C

  • 第2题：

    You have configured Junos Pulse on your Windows desktop and want to verify that the IPsec configuration policy is being pushed down to your workstation upon network authentication and login.Which utility program do you use to see this configuration and where do you find it?（）

    A. the Pulse Diagnostics Tool in the "File" > "Tools" menu option in the Pulse GUI

    B. the Pulse Diagnostics Tool in the "Start" > "All Programs" > "Juniper Networks" > "Junos Pulse" menu folder next to the Junos Pulse application

    C. the Pulse Diagnostics Viewer, which you access by simultaneously pressing "Ctrl" and "F2"

    D. the Pulse Diagnostics Viewer in the "File" > "Tools" menu option in the Pulse GUI


    参考答案：C

  • 第3题：

    A company has completed two acquisitions over the previous year. Each of the acquired companies was allowed to keep its own independent authentication server. The network administrator has been asked to roll out the Junos Pulse Access Control Service to users within the original company along with each of the two acquired organizations.The administrator configures three authentication realms, one for each independent authentication server, and associates them all with a single sign-in policy. All of the client endpoints are running Junos Pulse on their Windows XP desktops.When a user signs in to the Junos Pulse Access Control Service, which statement is correct?（）

    A. The first authentication realm that was added to the sign-in policy is used by default.

    B. The user is allowed to choose the correct authentication realm from a list presented by Junos Pulse.

    C. When Junos Pulse is initially installed on the desktop, it must be configured with the correct realm.

    D. This is not an allowed configuration; the administrator should configure separate sign-in policies for each realm.


    参考答案：B

  • 第4题：

    Your IT director has decided to allow employees to use their laptops at home as well as in the office. You have deployed the Junos Pulse client to allow access to the offices 802.1X-enabled wired network. Your company also has the Junos Pulse Secure Access Service deployed. You want the Junos Pulse client to automatically launch the appropriate access method depending on each users location. Which three are supported to determine the users location?（）

    • A、MAC address
    • B、DNS server
    • C、DHCP server
    • D、resolve address
    • E、endpoint address

    正确答案:B,D,E

  • 第5题：

    A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access Controe Service. When configuring the switch on the Junos Pulse Access Control Service, the customer does not find a make/model entry for it . Which two actions should the customer take to make the switch work with the Junos Pulse Access Control Service?（）

    • A、Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
    • B、Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
    • C、Add the switch as a firewall enforcer.
    • D、Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the make/model.

    正确答案:A,D

  • 第6题：

    You want to provide all users in your corporation with a single agent that provides access to multiple connection types conditionally. For example, you connect to the Junos Pulse Access Control Service if you are connected to the intranet, but you connect to the Junos Pulse Secure Access Service if you are on a remote network. Which agent should you use for this type of connection requirement?（）

    • A、Junos Pulse should be configured with location awareness rules configured.
    • B、Odyssey Access Client should be installed with Host Checker configured to check the client's location.
    • C、Junos Pulse should be configured with all components installed.
    • D、Agentless access should be enabled so that clients can connect to any service without concern for installing an agent.

    正确答案:A

  • 第7题：

    You have three classes of users on your network: employee, contractor, and IT administrator. You configure the Junos Pulse Access Control Service to assign roles to each user class and require that a specific wireless SSID be preconfigured for the Odyssey Access Client based on the role. Which configuration method should you use to satisfy this scenario?（）

    • A、Create a "Settings Update file" in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under "User Roles" > "Agent" > "Odyssey Settings" > "Preconfigured Installer".
    • B、Configure a wired adapter and assign the required SSID under "User Roles" > "Agent" > "Odyssey Settings".
    • C、Create a script in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under "User Roles" > "Agent" > "Odyssey Settings" > "Preconfigured Installer".
    • D、Create a "Preconfiguration file" in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under "User Roles" > "Agent" > "Odyssey Settings" > "Preconfigured Installer".

    正确答案:A,B,D

  • 第8题：

    Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions are causing this issue?（）

    • A、The endpoint is using EAP-PEAP with EAP-GTC as the inner protocol,
    • B、The endpoint is using EAP-TTLS with EAP-JUAC as the inner protocol.
    • C、The endpoint is using EAP-FAST with EAP-GTC as the inner protocol,
    • D、The endpoint is using EAP-PEAP with EAP-JUAC as the inner protocol.

    正确答案:A,C

  • 第9题：

    多选题
    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）
    A

    CLI

    B

    WebUI

    C

    NSM

    D

    Junos Pulse Access Control Service


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    多选题
    What are two use cases enabled by IF-MAP Federation?（）
    A

    Users authenticated to one Junos Pulse Access Control Service can transparently access resources protected by another Junos Pulse Access Control Service.

    B

    Users authenticated to a Junos Pulse Access Control Service can transparently access resources protected by a Junos Pulse Secure Access Service.

    C

    Remote access users authenticated to a Junos Pulse Secure Access Service can transparently access resources protected by a Junos Pulse Access Control Service.

    D

    Remote access users authenticated to one Junos Pulse Secure Access Service can transparently access resources protected by another Junos Pulse Secure Access Service.


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    多选题
    You have three classes of users on your network: employee, contractor, and IT administrator. You configure the Junos Pulse Access Control Service to assign roles to each user class and require that a specific wireless SSID be preconfigured for the Odyssey Access Client based on the role. Which configuration method should you use to satisfy this scenario?（）
    A

    Create a Settings Update file in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under User Roles > Agent > Odyssey Settings > Preconfigured Installer.

    B

    Configure a wired adapter and assign the required SSID under User Roles > Agent > Odyssey Settings.

    C

    Create a script in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under User Roles > Agent > Odyssey Settings > Preconfigured Installer.

    D

    Create a Preconfiguration file in the Odyssey Access Client Administrator and upload it to the Junos Pulse Access Control Service under User Roles > Agent > Odyssey Settings > Preconfigured Installer.


    正确答案： C,A
    解析： 暂无解析

  • 第12题：

    多选题
    Your IT director has decided to allow employees to use their laptops at home as well as in the office. You have deployed the Junos Pulse client to allow access to the offices 802.1X-enabled wired network. Your company also has the Junos Pulse Secure Access Service deployed. You want the Junos Pulse client to automatically launch the appropriate access method depending on each users location. Which three are supported to determine the users location?（）
    A

    MAC address

    B

    DNS server

    C

    DHCP server

    D

    resolve address

    E

    endpoint address


    正确答案： D,E
    解析： 暂无解析

  • 第13题：

    How would an end user add both a Junos Pulse Access Control Service URL and a Junos Pulse Secure Access Service URL to the same Junos Pulse client?()

    A. By adding two separate connections in the connections dialog box

    B. By adding two separate intranet Controllers under the configuration hierarchy

    C. By adding one intranet Controller and one SA under the configuration hierarchy

    D. By adding two URLs under a connection in the connections dialog box


    参考答案：A

  • 第14题：

    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）

    A. Session-Export policies on the Junos Pulse Secure Access Service

    B. Session-Export policies on the Junos Pulse Access Control Service

    C. Session-Import policies on the Junos Pulse Secure Access Service

    D. Session-Import policies on the Junos Pulse Access Control Service

    E. Resource access policies on the Junos Pulse Access Control Service


    参考答案：A, D, E

  • 第15题：

    You have configured Junos Pulse on your Windows desktop and want to verify that the IPsec configuration policy is being pushed down to your workstation upon network authentication and login.Which utility program do you use to see this configuration and where do you find it?（）

    • A、the Pulse Diagnostics Tool in the "File" > "Tools" menu option in the Pulse GUI
    • B、the Pulse Diagnostics Tool in the "Start" > "All Programs" > "Juniper Networks" > "Junos Pulse" menu folder next to the Junos Pulse application
    • C、the Pulse Diagnostics Viewer, which you access by simultaneously pressing "Ctrl" and "F2"
    • D、the Pulse Diagnostics Viewer in the "File" > "Tools" menu option in the Pulse GUI

    正确答案:C

  • 第16题：

    Your security policy requires that users authenticating to the Junos Pulse Access Control Service are connecting from a domain member endpoint on the internal corporate network.Which set of role access restrictions must you configure to enforce this security policy?（）

    • A、Source IP and browser
    • B、Source IP and certificate
    • C、Certificate and Host Checker
    • D、Host Checker and source IP

    正确答案:D

  • 第17题：

    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）

    • A、Session-Export policies on the Junos Pulse Secure Access Service
    • B、Session-Export policies on the Junos Pulse Access Control Service
    • C、Session-Import policies on the Junos Pulse Secure Access Service
    • D、Session-Import policies on the Junos Pulse Access Control Service
    • E、Resource access policies on the Junos Pulse Access Control Service

    正确答案:A,D,E

  • 第18题：

    How would an end user add both a Junos Pulse Access Control Service URL and a Junos Pulse Secure Access Service URL to the same Junos Pulse client?（）

    • A、By adding two separate connections in the connections dialog box
    • B、By adding two separate intranet Controllers under the configuration hierarchy
    • C、By adding one intranet Controller and one SA under the configuration hierarchy
    • D、By adding two URLs under a connection in the connections dialog box

    正确答案:A

  • 第19题：

    What are two use cases enabled by IF-MAP Federation?（）

    • A、Users authenticated to one Junos Pulse Access Control Service can transparently access resources protected by another Junos Pulse Access Control Service.
    • B、Users authenticated to a Junos Pulse Access Control Service can transparently access resources protected by a Junos Pulse Secure Access Service.
    • C、Remote access users authenticated to a Junos Pulse Secure Access Service can transparently access resources protected by a Junos Pulse Access Control Service.
    • D、Remote access users authenticated to one Junos Pulse Secure Access Service can transparently access resources protected by another Junos Pulse Secure Access Service.

    正确答案:A,C

  • 第20题：

    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）

    • A、CLI
    • B、WebUI
    • C、NSM
    • D、Junos Pulse Access Control Service

    正确答案:C,D

  • 第21题：

    多选题
    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）
    A

    Session-Export policies on the Junos Pulse Secure Access Service

    B

    Session-Export policies on the Junos Pulse Access Control Service

    C

    Session-Import policies on the Junos Pulse Secure Access Service

    D

    Session-Import policies on the Junos Pulse Access Control Service

    E

    Resource access policies on the Junos Pulse Access Control Service


    正确答案： B,A
    解析： 暂无解析

  • 第22题：

    单选题
    You want to provide all users in your corporation with a single agent that provides access to multiple connection types conditionally. For example, you connect to the Junos Pulse Access Control Service if you are connected to the intranet, but you connect to the Junos Pulse Secure Access Service if you are on a remote network. Which agent should you use for this type of connection requirement?（）
    A

    Junos Pulse should be configured with location awareness rules configured.

    B

    Odyssey Access Client should be installed with Host Checker configured to check the client's location.

    C

    Junos Pulse should be configured with all components installed.

    D

    Agentless access should be enabled so that clients can connect to any service without concern for installing an agent.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    多选题
    A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access Controe Service. When configuring the switch on the Junos Pulse Access Control Service, the customer does not find a make/model entry for it . Which two actions should the customer take to make the switch work with the Junos Pulse Access Control Service?（）
    A

    Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.

    B

    Add the switch to the Junos Pulse Access Control Service using the Any make/model.

    C

    Add the switch as a firewall enforcer.

    D

    Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the make/model.


    正确答案： D,B
    解析： 暂无解析

相关内容