单选题An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）A RoutingB Hop-by-HopC FragmentationD Destination Options

题目
单选题
An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）
A

Routing

B

Hop-by-Hop

C

Fragmentation

D

Destination Options

相似考题

1.An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?()A. RoutingB. Hop-by-HopC. FragmentationD. Destination Options

2.In IPv6, the interfaces running OSPF can be configured with multiple ad dress prefixes.Which statement is true about the IPv6 addresses that can be included into the OSPF process?" ()A. Specific addresses can be selected using a prefix list.B. Specific addresses can be selected using a route map.C. Specific addresses cann ot be selected for importation into the OSPF process.D. Specific addresses can be selected using an ACL.

3.Which three are characteristics of IPv6?()A. An IPv6 address is 128 bits long.B. An IPv6 header contains the header checksum field.C. An IPv6 header is 20 bits long.D. An IPv6 header contains the next header field.E. IPv6 route rs send RA messages.F. An IPv6 header contains the protocol field.

4.Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? ()A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

更多“单选题An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）A RoutingB Hop-by-HopC FragmentationD Destination Options”相关问题

  • 第1题：

    When an IPv6 enabled host boots, it sends a router solicitation (RS) message. An IPv6 router responds with a router advertisement (RA).Which two items are c ontained in the RA?()

    A. any route advertisements it has received

    B. prefixes for the link

    C. keepalive timers

    D. IPv6 address for the host

    E. request for the local host IP address

    F. lifetime of the prefix


    参考答案：B, F

  • 第2题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）

    • A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
    • B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
    • C、Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.
    • D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
    • E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

    正确答案:A,C

  • 第3题：

    While using the ping command to try and reach a local server, a technician receives a response of “Destination host unreachable”. After confirming that the PC is physically connected to the network, which of the following commands should the technician use to get more detailed information?（）

    • A、TRACERT
    • B、GREP
    • C、TELNET
    • D、DIG

    正确答案:A

  • 第4题：

    When an IPv6 enabled host boots, it sends a router solicitation (RS) message. An IPv6 router responds with a router advertisement (RA). Which two items are c ontained in the RA?（）

    • A、any route advertisements it has received
    • B、prefixes for the link
    • C、keepalive timers
    • D、IPv6 address for the host
    • E、request for the local host IP address
    • F、lifetime of the prefix

    正确答案:B,F

  • 第5题：

    An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）

    • A、Routing
    • B、Hop-by-Hop
    • C、Fragmentation
    • D、Destination Options

    正确答案:A

  • 第6题：

    You work as a network administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed and all client computers have Windows 8 installed.The ABC.com network has a single DNS server named ABC_SR09.The client computers are located in an organizational unit （OU） named ABCPCs.You add a new Windows Server 2012 R2 computer named ABC_SR10 to the network  and configure the computer as an Intrasite Automatic Tunnel Addressing Protocol （ISATAP） router. How would you enable the client computers to locate the ISATAP router through DNS？（）

    • A、You should run the netsh interface ipv6 install command on the client computers.
    • B、You should run the netsh interface ipv6 install command on ABC_SR10.
    • C、You should add the host （A） record isatap.ABC.com to the DNS zone.
    • D、You should add an IPv6 host （AAA） record for ABC_SR10 to the DNS zone.
    • E、You should run the Set-DnsServerGlobalQueryBlockList cmdlet on ABC_SR09.
    • F、You should run the Set NetIsatapConfiguration cmdlet on ABC_SR10.

    正确答案:C,E

  • 第7题：

    单选题
    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）
    A

    The Layer 2 multicast address of the destination node

    B

    The solicited node multicast address of the destination node

    C

    The Layer 2 address of the destination node based on the destination IPv6 address

    D

    The IPv6 address of the destination node based on the destination Layer 2 address


    正确答案： B
    解析： 暂无解析

  • 第8题：

    多选题
    Which three are characteristics of IPv6?（）
    A

    An IPv6 address is 128 bits long.

    B

    An IPv6 header contains the header checksum field.

    C

    An IPv6 header is 20 bits long.

    D

    An IPv6 header contains the next header field.

    E

    IPv6 route rs send RA messages.

    F

    An IPv6 header contains the protocol field.


    正确答案： A,C
    解析： 暂无解析

  • 第9题：

    多选题
    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
    A

    IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B

    IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C

    Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.

    D

    Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E

    IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    正确答案： E,A
    解析： 暂无解析

  • 第10题：

    多选题
    The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）
    A

    telnet access does not require a password

    B

    nat

    C

    no broadcast

    D

    chanage of destination address in the ipv6 header

    E

    chanage of source address in the ipv6 header

    F

    autoconfiguration


    正确答案： D,B
    解析： 暂无解析

  • 第11题：

    单选题
    Which information is carried in the OSPFv3 intra-area Prefix LSA？（）
    A

    all link-local addresses

    B

    all IPv6 prefix and topology information that OSPFv2 included in Router LSA and Network LSA

    C

    list of options associated with the link to all other routers attached to the link

    D

    all prefix-specific information that OSPFv2 included in Router LSA and Network LSA


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    While using the ping command to try and reach a local server, a technician receives a response of “Destination host unreachable”. After confirming that the PC is physically connected to the network, which of the following commands should the technician use to get more detailed information?（）
    A

    TRACERT

    B

    GREP

    C

    TELNET

    D

    DIG


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which OSI layer header contains the address of a destination host that is another network?（）

    • A、application
    • B、presentation
    • C、session
    • D、transport
    • E、network
    • F、data link
    • G、physical

    正确答案:E

  • 第14题：

    You are using IPv6， and would like to configure EIGRPv3. Which three of these correctly describe how you can perform this configuration？（）

    • A、EIGRP for IPv6 is directly configured on the interfaces over which it runs.
    • B、EIGRP for IPv6 is not configured on the interfaces over which it runs， but if a user uses passive-interface configuration， EIGRP for IPv6 needs to be configured on the interface that is made passive.
    • C、There is a network statement configuration in EIGRP for IPv6， the same as for IPv4.
    • D、There is no network statement configuration in EIGRP for IPv6.
    • E、When a user uses a passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive.
    • F、When a user uses a non-passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive

    正确答案:A,D,E

  • 第15题：

    Which three causes could prevent a host from getting an IPv6 address with stateless autoconfiguration？（）

    • A、The autoconfig command is missing from the router interface.
    • B、IPv6 multicast routing is not enabled on the router interface.
    • C、IPv6 unicast routing is not enabled on the router interface.
    • D、The router interface is configured with a /63 mask.
    • E、The router interface is configured with a /65 mask.

    正确答案:C,D,E

  • 第16题：

    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）

    • A、The Layer 2 multicast address of the destination node
    • B、The solicited node multicast address of the destination node
    • C、The Layer 2 address of the destination node based on the destination IPv6 address
    • D、The IPv6 address of the destination node based on the destination Layer 2 address

    正确答案:C

  • 第17题：

    Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A DHCP server is deployed on the network and configured to provide IPv6 prefixes.You need to ensure that when you monitor network traffic,you see the interface identifiers derived from the Extended Unique Identifier (EUI)-64 address.Which command should you run?（）

    • A、netsh.exe interface ipv6 set global addressmaskreply=disabled
    • B、netsh.exe interface ipv6 set global dhcpmediasense=enabled
    • C、netsh.exe interface ipv6 set global randomizeidentifiers=disabled
    • D、netsh.exe interface ipv6 set privacy state=enabled

    正确答案:C

  • 第18题：

    You have a computer that runs Windows 7. The IPv6 address of the computer is configured automatically.You need to identify the IPV6 address of the computer.  What should you do?（）

    • A、At the command prompt， run Netstat.
    • B、At the command prompt run Net config.
    • C、From the network connection status， click Details.
    • D、From network connection properties， select Internet Protocol Version 6 （TCP/IPv6） and click Properties.

    正确答案:C

  • 第19题：

    单选题
    Which statement is true concerning 6to4 tunneling?（）
    A

    The edge routers can use any locally configured  IPv6 address.

    B

    Hosts and routers inside a 6to4 site will need a special code.

    C

    An edge router must use IPv6 address of 2002::/16 in its prefix.

    D

    IPv4 traffic is encapsulated with an IPv6 header.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    Which OSI layer header contains the address of a destination host that is another network?（）
    A

    application

    B

    presentation

    C

    session

    D

    transport

    E

    network

    F

    data link

    G

    physical


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？ （）
    A

     The Layer 2 multicast address of the destination node

    B

     The solicited node multicast address of the destination node

    C

     The Layer 2 address of the destination node based on the destination IPv6 address

    D

     The IPv6 address of the destination node based on the destination Layer 2 address


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You have a computer that runs Windows 7. The IPv6 address of the computer is configured automatically.You need to identify the IPV6 address of the computer.  What should you do?（）
    A

    At the command prompt， run Netstat.

    B

    At the command prompt run Net config.

    C

    From the network connection status， click Details.

    D

    From network connection properties， select Internet Protocol Version 6 （TCP/IPv6） and click Properties.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）
    A

    Routing

    B

    Hop-by-Hop

    C

    Fragmentation

    D

    Destination Options


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A DHCP server is deployed on the network and configured to provide IPv6 prefixes.You need to ensure that when you monitor network traffic,you see the interface identifiers derived from the Extended Unique Identifier (EUI)-64 address.Which command should you run?（）
    A

    netsh.exe interface ipv6 set global addressmaskreply=disabled

    B

    netsh.exe interface ipv6 set global dhcpmediasense=enabled

    C

    netsh.exe interface ipv6 set global randomizeidentifiers=disabled

    D

    netsh.exe interface ipv6 set privacy state=enabled


    正确答案： D
    解析： 暂无解析

相关内容