单选题Given the following configuration on the Paris PE router: routing-instance {VPN-A-Paris-Munich {instance-type vrf;interface so-6/0/0.0;interface so-6/0/1.0;route-distinguisher 65535:0;vrf-target target:65535:101;routing-options {static {route 172.16.0.

A. ge-0/0/1

B. ge-0/0/2

C. ge-0/0/3

D. ge-0/0/4

Router R1 connects to Router R2 over an Ethernet LAN with both routers using their F0/0 interfaces. R1 learns a route from R2 using EIGRP f or IPv6. That route lists F0/0 as the outgoing interface with R2 as the next hop. The configuration excerpt shows all relevant configuration on R2‘s F0/0 interface. Which of the following is true about R1‘s route?（）interface f0/0mac - address 1111.1111.1 111ipv6 address 2000::/64 eui - 64ipv6 address 2001::1/64

A. The next hop is 2000::1311:11FF:FE11:1111

B. The next hop is FE80::1311:11FF:FE11:1111

C. The next hop is FE80::5111:11FF:FE11:1111

D. The next hop is 2001::1

A. After the router ospf 10 and passive - interface s0/0 commands have been issued , the s0/0 interface will not send any OSPF updates, but will receive routing updates on that interface

B. When you use the passive - interface command with RIPv2, multicasts are sent out the specified interface

C. After the router rip and passive -interface s0/0 commands have been issued, the s0/0 interface will not send any RIP updates, but will receive routing updates on that interface

D. When you use the passive - interface command with EIGRP, hel lo messages are not sent out the specified interface

E. After the router eigrp 10 and passive - interface s0/0 commands have been issued, the s0/0 interface will not send any EIGRP updates, but will receive routing updates on that interface

F. When you use the passive - interface command with OSPF, hello messages are not sent out the specified interface

A. It configures a router to send all packets out interface serial 0/0.

B. It configures a router to block routing updates from being sent out interface serial 0/0.

C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0.

D. It configures a router to send all packets for unknown destination networks out interface serial 0/0.

E. It configures a router to drop all packets for which the destination network is unknown.

A. Router John uses a link-state routing protocol.

B. Router John will receive routing updates on the Serial0/0 interface.

C. Router John will receive routing updates on the Serial0/1 interface.

D. Router John will send routing updates out the Serial0/0 interface.

E. Router John will send routing updates out the FastEthernet0/0 interface.

F. Router John will send routing updates out the Serial0/1 interface.

Router R1 use s MAC address 1111.1111.1111 for its Fa0/0 interface. An engineer sees the following configuration in the output of a show running - config command. Then, the engineer issues a show ipv6 interface brief command. What global unicast IPv6 address does this c ommand display for interface tunnel 1?（）interface loopback 1ip address 192.168.1.1 255.255.255.255interface tunnel 1tunnel source loopback 1tunnel destination 192.168.1.2tunnel mode ipv6ip isatapipv6 address 2000::/64 eui - 64

A. 2000::1311:11F F:FE11:1111

B. 2000::C0A5:101

C. 2000:C0A5:101::

D. 2000::5EFE:C0A5:101

Examine the following configuration on Router R1. R1‘s show ip route 172.16.4.1 command list s a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1‘s F0/0 interface?（）interface Fastethernet 0/0ip address 172.16.1.1 255.255.255.0ip policy route - map Q2!route - map Q2 permitmatch ip address 101set interface s0/0/1!access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255

A. The packet will be forwarded out S0/0 /1, or not at all.

B. The packet will be forwarded out S0/0/1 if it is up.

C. The packet will be forwarded out S0/1/1 if it is up.

D. The packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.

E. The packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.

Refer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?（）

A. Declare router B a stub router using the eigrp stub command.

B. Use the passive - interface command for interface Serial0/0/0.

C. Use a mask with the network command to exclude interface Serial0/0/0.

D. Implement a distribute list to exclude the link prefix from the routi ng updates.

The Peanut router is able to successfully ping the Serial 0 and Ethernet 0 interface of the Popcorn router, but a ping issued to the Ethernet 1 interface fails. Based on the above output, what are the potential causes of this problem?（）

A. The Popcorn router is not forwarding RIP updates.

B. The Popcorn router did not include network 192.168.12.0 in its routing configuration.

C. The Ethernet1 interface of the Popcorn router is shutdown.

D. The clockrate is not present in the configuration of one of the routers.

E. The Serial interface of the Popcorn router is not operating.