多选题You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）Aset protocols isis inet6Bset routing-options router-id router-

题目
多选题
You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）
A

set protocols isis inet6

B

set routing-options router-id router-id

C

set protocols ospf3 area 0 interface all

D

set interface fe-0/0/1 unit 0 family inet6

E

set routing-options ipv6-router-id router-id

相似考题

1.You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? ()A. set protocols isis inet6B. set routing-options router-id router-idC. set protocols ospf3 area 0 interface allD. set interface fe-0/0/1 unit 0 family inet6E. set routing-options ipv6-router-id router-id

2.In JUNOS software, which three routing protocols can be used to route IPv6?()A. IS-ISB. StaticC. RIPv2D. OSPFv2E. MP-BGP

3.In JUNOS software, which command is used to configure TED support for OSPF?()A. set protocols rsvp cspf-enableB. set protocols mpls cspf-enableC. set protocols rsvp traffic-engineeringD. set protocols ospf traffic-engineering

4.Which two MBGP IPv4 sub－AFIs does the JUNOS software support?()A.unicastB.anycastC.multicastD.broadcast

更多“多选题You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）Aset protocols isis inet6Bset routing-options router-id router-”相关问题

  • 第1题：

    Cisco IOS is the software used on the vast majority of Cisco Systems routers and current Cisco network switches. As a network administrator, you are required to configure MPLS on Cisco IOS. In such a situation,which three of the following steps are necessary to take?（）

    A. Start LDP.

    B. Enable CEF switching.

    C. Configure conditional label advertising.

    D. Enable label switching on frame mode interfaces.

    E. disable IP TTL propagation

    F. configure conditional label advertising


    参考答案：A, B, D

  • 第2题：

    Which three approaches can be used while migrating from an IPV4 addressing scheme to an IPV6 scheme.()

    A. statically map IPV4 address to IPV6 addresses

    B. configuration IPv4 tunnels between IPV6 islands

    C. use DHCPv6 to map IPV4 addresses to IPV6 addresses

    D. use proxying and translation to translate IPV6 packets into IPV4 packets

    E. configure IPV6 directly

    F. enable dual-stack routing


    参考答案：A, B, F

  • 第3题：

    Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?（）

    • A、Automatic 6to4
    • B、Manually configured tunnel
    • C、ISATAP
    • D、GRE

    正确答案:B,D

  • 第4题：

    Which three steps are used to configure IPv6 in JUNOS software？（）

    • A、Assign 128-bit router ID
    • B、Enable a routing instance.
    • C、Assign IPv6 addresses to interfaces.
    • D、Add IPv6 family support to interfaces

    正确答案:A,C,D

  • 第5题：

    Which three steps are used to configure IPv6 in JUNOS software?（）

    • A、Assign 128-bit router id.
    • B、Enable a routing instance.
    • C、Assign IPv6 addresses to interfaces.
    • D、Add IPv6 family support to interfaces.
    • E、Enable IPv6-capable routing protocol.

    正确答案:C,D,E

  • 第6题：

    Which of the following protocols would be used in order to log into a router to configure a VLAN?（）

    • A、RDP
    • B、SMTP
    • C、TELNET
    • D、FTP

    正确答案:C

  • 第7题：

    In JUNOS software， which three routing protocols can be used to route IPv6？（）

    • A、IS-IS
    • B、Static
    • C、RIPv2
    • D、OSPFv2
    • E、MP-BGP

    正确答案:A,B,E

  • 第8题：

    多选题
    You are using IPv6， and would like to configure EIGRPv3. Which three of these correctly describe how you can perform this configuration？（）
    A

    EIGRP for IPv6 is directly configured on the interfaces over which it runs.

    B

    EIGRP for IPv6 is not configured on the interfaces over which it runs， but if a user uses passive-interface configuration， EIGRP for IPv6 needs to be configured on the interface that is made passive.

    C

    There is a network statement configuration in EIGRP for IPv6， the same as for IPv4.

    D

    There is no network statement configuration in EIGRP for IPv6.

    E

    When a user uses a passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive.

    F

    When a user uses a non-passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive


    正确答案： C,F
    解析： 暂无解析

  • 第9题：

    多选题
    Which three steps are used to configure IPv6 in JUNOS software？（）
    A

    Assign 128-bit router ID

    B

    Enable a routing instance.

    C

    Assign IPv6 addresses to interfaces.

    D

    Add IPv6 family support to interfaces


    正确答案： C,B
    解析： 暂无解析

  • 第10题：

    多选题
    Which two MBGP IPv4 sub-AFIs does the JUNOS software support?（）
    A

    unicast

    B

    anycast

    C

    multicast

    D

    broadcast


    正确答案： C,B
    解析： 暂无解析

  • 第11题：

    多选题
    our company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？（）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks.

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible.

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible.

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： D,B
    解析： 暂无解析

  • 第12题：

    单选题
    In JUNOS software， which command is used to configure TED support for OSPF？（）
    A

    set protocols rsvp cspf-enable

    B

    set protocols mpls cspf-enable

    C

    set protocols rsvp traffic-engineering

    D

    set protocols ospf traffic-engineering


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?()

    A. Automatic 6to4

    B. Manually configured tunnel

    C. ISATAP

    D. GRE


    参考答案：B, D

  • 第14题：

    You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）

    • A、set protocols isis inet6
    • B、set routing-options router-id router-id
    • C、set protocols ospf3 area 0 interface all
    • D、set interface fe-0/0/1 unit 0 family inet6
    • E、set routing-options ipv6-router-id router-id

    正确答案:B,C

  • 第15题：

    Which two MBGP IPv4 sub-AFIs does the JUNOS software support？（）

    • A、unicast
    • B、anycast
    • C、multicast
    • D、broadcast

    正确答案:A,C

  • 第16题：

    Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）

    • A、Configure a routing process using the command ipv6 router ospf [process-id].
    • B、Add the network statement for the interfaces on which OSPF will run.
    • C、Configure OSPF on the interface that it will run on.
    • D、Use the passive-interface command on the interfaces on which OSPF should not run.
    • E、Enable routing.

    正确答案:C,E

  • 第17题：

    Which three approaches can be used while migrating from an IPV4 addressing scheme to an IPV6 scheme?（）

    • A、statically map IPV4 address to IPV6 addresses
    • B、configuration IPv4 tunnels between IPV6 islands
    • C、use DHCPv6 to map IPV4 addresses to IPV6 addresses
    • D、use proxying and translation to translate IPV6 packets into IPV4 packets
    • E、configure IPV6 directly
    • F、enable dual-stack routing

    正确答案:A,B,F

  • 第18题：

    In JUNOS software， which command is used to configure TED support for OSPF？（）

    • A、set protocols rsvp cspf-enable
    • B、set protocols mpls cspf-enable
    • C、set protocols rsvp traffic-engineering
    • D、set protocols ospf traffic-engineering

    正确答案:D

  • 第19题：

    多选题
    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： C,D
    解析： 暂无解析

  • 第20题：

    多选题
    Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?（）
    A

    Automatic 6to4

    B

    Manually configured tunnel

    C

    ISATAP

    D

    GRE


    正确答案： B,D
    解析： 暂无解析

  • 第21题：

    多选题
    Which three steps are used to configure IPv6 in JUNOS software?（）
    A

    Assign 128-bit router id.

    B

    Enable a routing instance.

    C

    Assign IPv6 addresses to interfaces.

    D

    Add IPv6 family support to interfaces.

    E

    Enable IPv6-capable routing protocol.


    正确答案： B,C
    解析： 暂无解析

  • 第22题：

    多选题
    In JUNOS software, which three routing protocols can be used to route IPv6?（）
    A

    IS-IS

    B

    Static

    C

    RIPv2

    D

    OSPFv2

    E

    MP-BGP


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    多选题
    You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）
    A

    set protocols isis inet6

    B

    set routing-options router-id router-id

    C

    set protocols ospf3 area 0 interface all

    D

    set interface fe-0/0/1 unit 0 family inet6

    E

    set routing-options ipv6-router-id router-id


    正确答案： E,A
    解析： 暂无解析

  • 第24题：

    多选题
    Cisco IOS is the software used on the vast majority of Cisco Systems routers and current Cisco network switches. As a network administrator, you are required to configure MPLS on Cisco IOS. In such a situation, which three of the following steps are necessary to take?（）
    A

    Start LDP.

    B

    Enable CEF switching.

    C

    Configure conditional label advertising.

    D

    Enable label switching on frame mode interfaces.

    E

    disable IP TTL propagation

    F

    configure conditional label advertising


    正确答案： E,F
    解析： 暂无解析

相关内容