Advertise cost to the ABR.
Summarize external routes.
Advertise cost to the ASBR.
Report a broadcast segment's DR
第1题:
A. Router LSA ( Type = 1 )
B. Netwrok LSA ( Type = 2 )
C. Network Summary LSA ( Type = 3 )
D. ASBR Summary LSA ( Type = 4 )
E. AS External LSA ( Type = 5 )
第2题:
The show ip ospf database external command displays information about which OSPF LSA type?()
第3题:
What is the function of the Type 4 LSA?()
第4题:
What configuration command allows the ERX Edge Router to advertise customer networks into the provider’s IGP?()
第5题:
What action will a BGP route reflector take when it receives a prefix marked with the community attribute NO ADVERTISE from a client peer?()
第6题:
What is the function performed by LSA Type 1?()
第7题:
2104
ESS800
FAStT600
SSA 7133
第8题:
They are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.
They are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.
They are originated by the DR on every multi - access network. They include all attached routers including the DR itself.
They are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
第9题:
It will advertise the prefix to all other client peers and non-client peers.
It will not advertise the prefix to EBGP peers.
It will only advertise the prefix to all other IBGP peers.
It will not advertise the prefix to any peers.
第10题:
Advertise cost to the ABR.
Summarize external routes.
Advertise cost to the ASBR.
Report a broadcast segment's DR
第11题:
R1 is configured with an area 0 virtual - link 4.4.4.4 cost 3 command.
The ping 4.4.4.4 command on R1 must currently be successful.
R1's Fa0/0 OSPF cost is 3.
4.4.4.4 is known to R1 based on a Type 1 LSA in area 1.
第12题:
They are used to summarize area routes to other areas.
They are used in not-so-stubby areas to propagate external routes.
They are used to notify areas of the ASBR.
They are flooded to all areas except stub areas (external route).
第13题:
What OSPF LSA is used to support MPLS-traffic Engineering ?()
第14题:
Which one of these statements is true of OSPF type 5 LSAs? ()
第15题:
What is true regarding the OSPF Type 2 LSA?()
第16题:
What is the meaning “cost-effective”? ()
第17题:
If two routers, both reachable from one another, originate functionally equivalent type 2 external- LSAs (i.e,same destination, cost and non-zero forwarding address ), Which of the following statements wouldapply ?()
第18题:
Router LSA ( Type = 1 )
Netwrok LSA ( Type = 2 )
Network Summary LSA ( Type = 3 )
ASBR Summary LSA ( Type = 4 )
AS External LSA ( Type = 5 )
第19题:
redistribute direct
redistribute static
redistribute connected
redistribute access-internal
第20题:
redistribute direct
redistribute static
redistribute connected
redistribute access-internal
第21题:
The DR floods this to describe the local stub network segment.
The ABR floods this to describe the local stub network segment.
The DR floods this to describe the local transit network segment.
Each OSPF router floods this to describe its interfaces and metrics.
The DR and BDR flood this to describe the local transit network segment.
第22题:
Two LSAs will exist in the network for this destination, and both will be used
Two LSAs will exist in the network for this destination, but only the one generated by the highest RID ASBR will be used
Only the LSA generated by the highest RID ASBR will exist in the network
Only the LSA generated by the lowest RID ASBR will exist in the network
第23题:
Create virtual links.
Advertise external prefixed.
Summarize routes between areas.
Advertise a router’s interfaces and metrics.
第24题:
External LSA (Type 5 )
Opaque LSA (Type 9 )
Opaque LSA (Type 10 )
Opaque LSA (Type 11 )
NSSA LSA (Type 7 )