单选题You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）A user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1B use

题目
单选题
You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）
A

user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1

B

user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1

C

user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1

D

user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1

相似考题

1.As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?A．TestKSwitch(config)# ip route-default 192.168.1.115B．TestKSwitch(config)# ip default-gateway 192.168.1.115C．TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0D．TestKSwitch(config)# ip default-network 192.168.1.115E．None of the above

2.You have been asked to configure your MX240 with a default route toward your upstream ISP at IP address 192.168.100.1. Which command successfully completes this task?()A. user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1B. user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1C. user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1D. user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1

3.Which command will apply a policy to redistribute static routes into OSPF?()A. set protocols ospf import static-routesB. set protocols ospf export static-routesC. set routing-options static defaults readvertiseD. set routing-options static route 0.0.0.0/0 readvertise

4.You need to configure a default route on a Ezonexam router. Which command will configure a default route on a router?A．VE1(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1B．VE1(config)# ip default-route 10.1.1.0C．VE1(config)# ip default-gateway 10.1.1.0D．VE1(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1

参考答案和解析
正确答案： A
解析： 暂无解析
更多“单选题You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）A user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1B use”相关问题

  • 第1题：

    Which command will drop a matching packet and send out a notification message?()

    A. set routing-options static route 10.1.1.1/32 no-retain

    B. set routing-options static route 10.1.1.1/32 discard

    C. set routing-options static route 10.1.1.1/32 reject

    D. set routing-options static route 10.1.1.1/32 no-install


    参考答案：C

  • 第2题：

    As a TestKing trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?()

    A. TestKSwitch(config)# ip route-default 192.168.1.115

    B. TestKSwitch(config)# ip default-gateway 192.168.1.115

    C. TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0

    D. TestKSwitch(config)# ip default-network 192.168.1.115


    参考答案：B

  • 第3题：

    You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?()

    A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36

    B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255

    C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255

    D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0

    E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0

    F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36


    参考答案：A, D

  • 第4题：

    You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?（）

    • A、Switch(config)# ip default-network 192.168.12.1
    • B、Switch(config)#ip route-default 192.168.12.1
    • C、Switch(config)# ip default-gateway 192.168.12.1
    • D、Swicth(config)# ip route 192.168.12.1 0.0.0.0

    正确答案:C

  • 第5题：

    Which command will silently drop a matching packet?（）

    • A、set routing-options static route 10.1.1.1/32 no-retain
    • B、set routing-options static route 10.1.1.1/32 discard
    • C、set routing-options static route 10.1.1.1/32 reject
    • D、set routing-options static route 10.1.1.1/32 passive

    正确答案:B

  • 第6题：

    You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）

    • A、user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • B、user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1
    • C、user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • D、user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1

    正确答案:A

  • 第7题：

    Which command will drop a matching packet and send out a notification message?（）

    • A、set routing-options static route 10.1.1.1/32 no-retain
    • B、set routing-options static route 10.1.1.1/32 discard
    • C、set routing-options static route 10.1.1.1/32 reject
    • D、set routing-options static route 10.1.1.1/32 no-install

    正确答案:C

  • 第8题：

    多选题
    You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?（）
    A

    LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36

    B

    LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255

    C

    LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255

    D

    LTD(config)# ip route 0.0.0.0 0.0.0.0 E0

    E

    LTD(config)# ip route 0.0.0.0 255.255.255.255 S0

    F

    LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36


    正确答案： A,D
    解析： 暂无解析

  • 第9题：

    多选题
    Which of the commands below can you use to configure a default route?（）
    A

    TK1(config)# ip route 0.0.0.0 0.0.0.0 E0

    B

    TK1(config)# ip route 0.0.0.0 255.255.255.255 S0

    C

    TK1(config-interface)# ip route 255.255.255.255 0.0.0.0 192.168.1.21

    D

    TK1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.21

    E

    TK1(config)# ip route 0.0.0.0 192.168.1.21 255.255.255.255

    F

    TK1# ip default-network 0.0.0.0 192.168.1.21 255.255.255.255


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    单选题
    Which command is used to configure a default route?（）
    A

    ip route 172.16.1.0 255.255.255.0 0.0.0.0

    B

    ip route 172.16.1.0 255.255.255.0 172.16.2.1

    C

    ip route 0.0.0.0 255.255.255.0 172.16.2.1

    D

    ip route 0.0.0.0 0.0.0.0 172.16.2.1


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?（）
    A

    Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0

    B

    Router(config)# ip route 0.0.0.0 255.255.255.255 s0

    C

    Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0

    D

    Router(config)# ip route 0.0.0.0 0.0.0.0 s0

    E

    Router(config)# ip route any any e0


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    You have been asked to configure your MX240 with a default route toward your upstream ISP at IP address 192.168.100.1. Which command successfully completes this task?（）
    A

    user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1

    B

    user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1

    C

    user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1

    D

    user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）

    A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0

    B.ip default - network 2 0.0.0.0

    C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0

    D.ip default - network 20.20.20.0


    参考答案：A

  • 第14题：

    You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()

    A. Switch(config)# ip default-network 192.168.12.1

    B. Switch(config)#ip route-default 192.168.12.1

    C. Switch(config)# ip default-gateway 192.168.12.1

    D. Swicth(config)# ip route 192.168.12.1 0.0.0.0


    参考答案：C

  • 第15题：

    Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?()

    A. Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0

    B. Router(config)# ip route 0.0.0.0 255.255.255.255 s0

    C. Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0

    D. Router(config)# ip route 0.0.0.0 0.0.0.0 s0

    E. Router(config)# ip route any any e0


    参考答案：D

  • 第16题：

    Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?（）

    • A、Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0
    • B、Router(config)# ip route 0.0.0.0 255.255.255.255 s0
    • C、Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0
    • D、Router(config)# ip route 0.0.0.0 0.0.0.0 s0
    • E、Router(config)# ip route any any e0

    正确答案:D

  • 第17题：

    Which command will apply a policy to redistribute static routes into OSPF?（）

    • A、set protocols ospf import static-routes
    • B、set protocols ospf export static-routes
    • C、set routing-options static defaults readvertise
    • D、set routing-options static route 0.0.0.0/0 readvertise

    正确答案:B

  • 第18题：

    You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.Which method will accomplish this?（）

    • A、Apply an export policy to OSPF that exports the default route
    • B、Apply an import policy to OSPF that imports the default route
    • C、Apply the default-network command to OSPF
    • D、Apply the redistribute-igp command to BGP

    正确答案:A

  • 第19题：

    You have been asked to configure your MX240 with a default route toward your upstream ISP at IP address 192.168.100.1. Which command successfully completes this task?（）

    • A、user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • B、user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1
    • C、user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • D、user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1

    正确答案:A

  • 第20题：

    单选题
    You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?（）
    A

    Switch(config)# ip default-network 192.168.12.1

    B

    Switch(config)#ip route-default 192.168.12.1

    C

    Switch(config)# ip default-gateway 192.168.12.1

    D

    Swicth(config)# ip route 192.168.12.1 0.0.0.0


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）
    A

    user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1

    B

    user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1

    C

    user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1

    D

    user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    As a TestKing trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?（）
    A

    TestKSwitch(config)# ip route-default 192.168.1.115

    B

    TestKSwitch(config)# ip default-gateway 192.168.1.115

    C

    TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0

    D

    TestKSwitch(config)# ip default-network 192.168.1.115


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Which command will apply a policy to redistribute static routes into OSPF?（）
    A

    set protocols ospf import static-routes

    B

    set protocols ospf export static-routes

    C

    set routing-options static defaults readvertise

    D

    set routing-options static route 0.0.0.0/0 readvertise


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.Which method will accomplish this?（）
    A

    Apply an export policy to OSPF that exports the default route

    B

    Apply an import policy to OSPF that imports the default route

    C

    Apply the default-network command to OSPF

    D

    Apply the redistribute-igp command to BGP


    正确答案： C
    解析： 暂无解析

相关内容