单选题An administrator is installing AIX. The SMS panel lists the following network adapter:NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same manag

题目
单选题
An administrator is installing AIX. The SMS panel lists the following network adapter:NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system. What speed and duplex should be configured on this adapter?（）
A

100/Full

B

1000/Half

C

1000/Auto

D

Auto/Auto

相似考题

1.A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）A、Upgrade the network switches to 10Gb speed.B、Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.C、Install one extra adapter to team with the internal adapter and configure adapter failover.D、Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.

2.Which action increases server availability？（）A、 configuring a second network card with a different IP addressB、 replacing the existing 100 Mbps NIC with a gigabit Ethernet NICC、 using adapter teaming and configuring the second network card with the same IP address as the first network cardD、 installing a dual-port network card that can handle the future growth and setting one NIC to 10 Mbps and one NIC to 100 Mbps

3. Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）A、The resources must be unallocated in an LPARB、The microcode on the pSeries must be currentC、All network adapters on the LPAR must be definedD、Network connectivity and name resolution capability between HMC and LPARs

4. You are designing a Windows Server 2008 R2 Hyper-V Virtualization environment. Your host servers must have the following elements： - A dedicated management network adapter. - A dedicated virtual network for child iSCSI network traffic. - A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose？（）A、Two network adapters that support 802.1p， and one iSCSI host bus adapterB、Two network adapters that support 802.1p， and one network adapter that supports TCP ChimneyC、Two network adapters that support 802.lq， and one network adapter that supports Jumbo framesD、Three network adapters that support 802. 1p

更多“单选题An administrator is installing AIX. The SMS panel lists the following network adapter:NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same manag”相关问题

  • 第1题：

    An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option?（）

    • A、The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel.
    • B、The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel.
    • C、The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks.
    • D、The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.

    正确答案:D

  • 第2题：

    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

    • A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
    • B、Use the same virtual LAN ID on each LPAR.
    • C、Set up IP routing through an LPAR on each system.
    • D、Set up an IP firewall through an LPAR on each system.

    正确答案:A

  • 第3题：

    You are designing a Windows Server 2008 R2 Hyper-V virtualization environment. Your host servers must have the following elements：  A dedicated management network adapter.A dedicated virtual network for child iSCSI network traffic.A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing.  Which adapters should you choose？（）

    • A、three network adapters that support 802.1p
    • B、two network adapters that support 802.1q， and one iSCSI host bus adapter
    • C、two network adapters that support 802.1p， and one network adapter that supports TCP Chimney
    • D、two network adapters that support 802.1q， and one network adapter that supports Jumbo frames

    正确答案:D

  • 第4题：

    Which of the following lists of items all require an HMC to function with POWER5？（）

    • A、Running AIX 5.3 Implementing HACMP Implementing Static LPAR
    • B、Implementing Advanced POWER Virtualization Running Linux Attaching RIO drawers
    • C、Implementing VIO Server Implementing Dynamic LPAR Running with SMT turned "On"
    • D、Running AIX and Linux on the same system Implementing CoD Implementing Micro-Partitioning

    正确答案:D

  • 第5题：

    单选题
    You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）
    A

    Enable DHCP in the TCP/IP properties.

    B

    Replace the Token Ring network adapter with an Ethernet network adapter.

    C

    Configure a different TCP/IP address on the same subnet.

    D

    Configure a valid DNS Server in the TCP/IP properties.


    正确答案： B
    解析： 暂无解析

  • 第6题：

    单选题
    You are designing a Windows Server 2008 R2 Hyper-V Virtualization environment. Your host servers must have the following elements： - A dedicated management network adapter. - A dedicated virtual network for child iSCSI network traffic. - A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose？（）
    A

    Two network adapters that support 802.1p， and one iSCSI host bus adapter

    B

    Two network adapters that support 802.1p， and one network adapter that supports TCP Chimney

    C

    Two network adapters that support 802.lq， and one network adapter that supports Jumbo frames

    D

    Three network adapters that support 802. 1p


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    Which action increases server availability？（）
    A

     configuring a second network card with a different IP address

    B

     replacing the existing 100 Mbps NIC with a gigabit Ethernet NIC

    C

     using adapter teaming and configuring the second network card with the same IP address as the first network card

    D

     installing a dual-port network card that can handle the future growth and setting one NIC to 10 Mbps and one NIC to 100 Mbps


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）
    A

    The resources must be unallocated in an LPAR

    B

    The microcode on the pSeries must be current

    C

    All network adapters on the LPAR must be defined

    D

    Network connectivity and name resolution capability between HMC and LPARs


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator wants to rackmount a new server.  Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed.  Which of the following items should the administrator FIRST verify before installing the server？（）
    A

    HBA is compatible with the SAN fiber switch.

    B

    Update the newly installed server with the latest KVM drivers.

    C

    The UPS will continue to perform as expected with the additional load.

    D

    Verify the server NIC is compatible with the NAS.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following lists of items all require an HMC to function with POWER5？（）
    A

    Running AIX 5.3 Implementing HACMP Implementing Static LPAR

    B

    Implementing Advanced POWER Virtualization Running Linux Attaching RIO drawers

    C

    Implementing VIO Server Implementing Dynamic LPAR Running with SMT turned On

    D

    Running AIX and Linux on the same system Implementing CoD Implementing Micro-Partitioning


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A customer uses an IBM xSeries x366.  They experienced downtime when the NIC failed earlier this year.  Their Windows 2003 server needs to be accessible all the time， at the highest speed possible.  Two adapters are currently installed in the x366.  Which of the following is the procedure to obtain the best performance and ensure network functionality in case of NIC failure？（）
    A

    Install four NICs and configure load balancing adapter teaming.

    B

    Install four NICs and configure adapter failover teaming.

    C

    Install seven NICs and configure load balancing adapter teaming.

    D

    Install one extra NIC to team with the internal adapter and configure failover teaming.


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    You are designing a Windows Server 2008 R2 Hyper-V virtualization environment. Your host servers must have the following elements：  A dedicated management network adapter.A dedicated virtual network for child iSCSI network traffic.A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing.  Which adapters should you choose？（）
    A

    three network adapters that support 802.1p

    B

    two network adapters that support 802.1q， and one iSCSI host bus adapter

    C

    two network adapters that support 802.1p， and one network adapter that supports TCP Chimney

    D

    two network adapters that support 802.1q， and one network adapter that supports Jumbo frames


    正确答案： C
    解析： 暂无解析

  • 第13题：

    An administrator is installing AIX. The SMS panel lists the following network adapter:NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system. What speed and duplex should be configured on this adapter?（）

    • A、100/Full
    • B、1000/Half
    • C、1000/Auto
    • D、Auto/Auto

    正确答案:D

  • 第14题：

    An administrator is installing AIX. The SMS panel lists the following network adapter：  NIC Adapters DeviceLocation CodeHardware. 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002. The NIM server is running in another LPAR on the same managed system. What speed and duplex should be configured on this adapter？（）

    • A、100/Full
    • B、1000/Half
    • C、1000/Auto
    • D、Auto/Auto

    正确答案:D

  • 第15题：

    You work as a senior administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet.Which of the following describes the results of running this cmdlet？（）

    • A、It removes one or more network adapters from a specified NIC team.
    • B、It removes a team interface from a NIC team.
    • C、It removes a specified NIC team from the host.
    • D、It removes a network adapter member from a switch team.

    正确答案:C

  • 第16题：

    Recently traffic to the company web server has more than doubled， resulting in slower response times from the server.  An administrator has decided to add a second， identical 10/100/1000 NIC to the server.  The server is presently connected to a 10/100/1000 switch， with four open ports on the switch.  Which of the following is the BEST solution to speed up web traffic？（）

    • A、Free up more ports on the switch
    • B、Enable server load balancing
    • C、Move the second network adapter to a new subnet
    • D、Enable network adapter teaming

    正确答案:D

  • 第17题：

    单选题
    You work as a senior administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet.Which of the following describes the results of running this cmdlet？（）
    A

    It removes one or more network adapters from a specified NIC team.

    B

    It removes a team interface from a NIC team.

    C

    It removes a specified NIC team from the host.

    D

    It removes a network adapter member from a switch team.


    正确答案： B
    解析： 暂无解析

  • 第18题：

    单选题
    An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option?（）
    A

    The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel.

    B

    The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel.

    C

    The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks.

    D

    The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    Recently traffic to the company web server has more than doubled， resulting in slower response times from the server.  An administrator has decided to add a second， identical 10/100/1000 NIC to the server.  The server is presently connected to a 10/100/1000 switch， with four open ports on the switch.  Which of the following is the BEST solution to speed up web traffic？（）
    A

    Free up more ports on the switch

    B

    Enable server load balancing

    C

    Move the second network adapter to a new subnet

    D

    Enable network adapter teaming


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Windows Firewall is disabled on Server1. Server1 has two network adapters named NIC1 and NIC2. Both network adapters are connected to the same network segment. The IP address for NIC1 is 192.168.1.11. The IP address for NIC2 is 192.168.1.12. You regularly connect to Server1 by using Remote Desktop Connection. The NIC1 network adapter fails. You attempt to establish a Remote Desktop connection to 192.168.1.12, but the connection fails. You successfully connect to 192.168.1.12 by using Windows Explorer. You verify that IP filtering is disabled and that no IPSec policies are assigned. You need to ensure that you can establish Remote Desktop connections to Server1. What should you do?（）
    A

    From Windows Firewall, enable the Remote Desktop exception.

    B

    From Terminal Services Manager, modify the RDP-TCP settings.

    C

    From the properties of NIC1, modify Internet Protocol (TCP/IP) settings.

    D

    From Windows Explorer, modify the %systemroot%/system32/drivers/etc/services file.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）
    A

    Upgrade the network switches to 10Gb speed.

    B

    Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.

    C

    Install one extra adapter to team with the internal adapter and configure adapter failover.

    D

    Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator is installing AIX. The SMS panel lists the following network adapter：  NIC Adapters DeviceLocation CodeHardware. 1.Interpartition Logical LANU9123.710.1008B1A-V4-C2-T15e5a00004002. The NIM server is running in another LPAR on the same managed system. What speed and duplex should be configured on this adapter？（）
    A

    100/Full

    B

    1000/Half

    C

    1000/Auto

    D

    Auto/Auto


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）
    A

    Configure a Shared Ethernet Adapter on the Virtual I/O Server.

    B

    Use the same virtual LAN ID on each LPAR.

    C

    Set up IP routing through an LPAR on each system.

    D

    Set up an IP firewall through an LPAR on each system.


    正确答案： B
    解析： 暂无解析

相关内容