单选题A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）A Perform a BIOS upgradeB Update the IDE controller's firmwareC Format the HDD on another PCD Update the

题目
单选题
A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）
A

Perform a BIOS upgrade

B

Update the IDE controller's firmware

C

Format the HDD on another PC

D

Update the IDE controller's driver

相似考题

1.下面关于PCI和IDE的叙述中,正确的是A．PCI是总线标准,IDE是磁盘接口标准B．PCI和IDE都是总线标准C．PCI和IDE都是磁盘接口标准D．PCI是磁盘接口标准,IDE是总线标准

2.一台PC上可以有两个IDE接口(将其称为第一IDE、第二IDE),而每个IDE接口上可以接两个IDE设备(将其称为主盘、从盘)。在Linux中,对第二IDE的主盘的命名名称为()A. /dev/hadB. /dev/hdbC. /dev/hdcD. /dev/hdd

3.Which of the following is a type of motherboard？（）A、PCI daughter boardB、IDE controller boardC、SATA controller boardD、micro ATXE、standard ATX

4.下面是关于PCI和IDE的叙述，其中正确的是______。A．PCI是总线标准，IDE是磁盘接口标准B．PCI和IDE都是总线标准C．PCI和IDE都是磁盘接口标准D．PCI是磁盘接口标准，IDE是总线标准

更多“单选题A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）A Perform a BIOS upgradeB Update the IDE controller's firmwareC Format the HDD on another PCD Update the”相关问题

  • 第1题：

    A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）

    • A、Have the client purchase a SATA compatible system board.
    • B、Have the client purchase a SATA to IDE conversion kit.
    • C、Have the client return the drive and purchase an IDE compatible drive.
    • D、Have the client purchase a SCSI to SATA conversion kit.

    正确答案:C

  • 第2题：

    An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）

    • A、The jumpers are not set correctly on the drives.
    • B、The power supply is not rated high enough to support the additional drives.
    • C、The BIOS is not compatible with the drives.
    • D、The drives are not powered on.

    正确答案:A

  • 第3题：

    A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）

    • A、Perform a BIOS upgrade
    • B、Update the IDE controller's firmware
    • C、Format the HDD on another PC
    • D、Update the IDE controller's driver

    正确答案:B

  • 第4题：

    Before installing a firmware update on a RAID controller which of the following should be done？（）

    • A、 Check for corresponding driver updates.
    • B、 Rebuild any arrays on the controller.
    • C、 Check for corresponding OS updates.
    • D、 Install a redundant BIOS on the controller.

    正确答案:A

  • 第5题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第6题：

    You are configuring a virtual machine （VM） that is running on a Windows Server 2008 R2 host server. The primary virtual disk is connected to IDE Controller 0. You need to add a virtual disk to the VM without shutting down the VM. What should you do？（）

    • A、Add the virtual disk to IDE Controller 0.
    • B、Add the virtual disk to IDE Controller 1.
    • C、Add the virtual disk to an existing SCSI controller.
    • D、Add a virtual network adapter to the VM. Attach an iSCSI disk to the VM through the virtual network adapter.

    正确答案:C

  • 第7题：

    单选题
    A technician is upgrading an internal IDE drive in a laptop. Which of the following HDD types is thetechnician MOST likely using?（）
    A

    PATA

    B

    SATA

    C

    Solid state

    D

    RAID


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    一台PC上可以有两个IDE接口（将其称为第一IDE、第二IDE），而每个IDE接口上可以接两个IDE设备（将其称为主盘、从盘）。在Linux中，对第二IDE的主盘的命名名称为（）。
    A

    /dev/hda

    B

    /dev/hdb

    C

    /dev/hdc

    D

    /dev/hdd


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller.  Which of the following must be done before booting the server back into Windows？（）
    A

     Update the time and date in the BIOS.

    B

     Update the firmware on the SCSI controller.

    C

     Update the firmware to the latest version.

    D

     Configure IPMI on the new board.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）
    A

    The jumpers are not set correctly on the drives.

    B

    The power supply is not rated high enough to support the additional drives.

    C

    The BIOS is not compatible with the drives.

    D

    The drives are not powered on.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）
    A

     backup the BIOS configuration to use later

    B

     install the BIOS update from a command prompt

    C

     create a bootable floppy and copy the BIOS update tools to the floppy

    D

     read the manufacturer’s guidelines and recommendations on installing the update


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）
    A

    Add the virtual disks to IDE Controller 0.

    B

    Add the virtual disks to an existing SCSI controller.

    C

    Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.

    D

    Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）

    • A、The hard drives were not plugged into the server correctly.
    • B、The controller driver is outdated and needs to be updated from the OEMs website.
    • C、The firmware for the server is too old and does not support the new RAID controller card.
    • D、The cable from the controller to the hard drive backplane is not connected.

    正确答案:C

  • 第14题：

    一台PC上可以有两个IDE接口（将其称为第一IDE、第二IDE），而每个IDE接口上可以接两个IDE设备（将其称为主盘、从盘）。在Linux中，对第二IDE的主盘的命名名称为（）。

    • A、/dev/hda
    • B、/dev/hdb
    • C、/dev/hdc
    • D、/dev/hdd

    正确答案:C

  • 第15题：

    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

    • A、 backup the BIOS configuration to use later
    • B、 install the BIOS update from a command prompt
    • C、 create a bootable floppy and copy the BIOS update tools to the floppy
    • D、 read the manufacturer’s guidelines and recommendations on installing the update

    正确答案:D

  • 第16题：

    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

    • A、Update the time and date in the BIOS.
    • B、Update the firmware on the SCSI controller.
    • C、Update the firmware to the latest version.
    • D、Configure IPMI on the new board.

    正确答案:A

  • 第17题：

    You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）

    • A、Add the virtual disks to IDE Controller 0.
    • B、Add the virtual disks to an existing SCSI controller.
    • C、Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.
    • D、Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.

    正确答案:B

  • 第18题：

    You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you find a USB controller there but with a yellow warning icon next to the host controller name. What should you do to resolve this problem？ （）

    • A、Update the scanner drivers using certified drivers
    • B、Enable the USB port in the computers BIOS again.
    • C、Contact the maker or vendor for you system and obtain the current version of BIOS.
    • D、Enable the USB hub controller in device manager.

    正确答案:C

  • 第19题：

    单选题
    A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）
    A

    Have the client purchase a SATA compatible system board.

    B

    Have the client purchase a SATA to IDE conversion kit.

    C

    Have the client return the drive and purchase an IDE compatible drive.

    D

    Have the client purchase a SCSI to SATA conversion kit.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）
    A

    Perform a BIOS upgrade

    B

    Update the IDE controller's firmware

    C

    Format the HDD on another PC

    D

    Update the IDE controller's driver


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Before installing a firmware update on a RAID controller which of the following should be done？（）
    A

     Check for corresponding driver updates.

    B

     Rebuild any arrays on the controller.

    C

     Check for corresponding OS updates.

    D

     Install a redundant BIOS on the controller.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）
    A

    The hard drives were not plugged into the server correctly.

    B

    The controller driver is outdated and needs to be updated from the OEMs website.

    C

    The firmware for the server is too old and does not support the new RAID controller card.

    D

    The cable from the controller to the hard drive backplane is not connected.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    You are configuring a virtual machine （VM） that is running on a Windows Server 2008 R2 host server. The primary virtual disk is connected to IDE Controller 0. You need to add a virtual disk to the VM without shutting down the VM. What should you do？（）
    A

    Add the virtual disk to IDE Controller 0.

    B

    Add the virtual disk to IDE Controller 1.

    C

    Add the virtual disk to an existing SCSI controller.

    D

    Add a virtual network adapter to the VM. Attach an iSCSI disk to the VM through the virtual network adapter.


    正确答案： D
    解析： 暂无解析

相关内容