更多“多选题Which of the following voltages can be measured from a Molex connector on the power supply?()A1.5 voltsB3 voltsC5 voltsD12 voltsE115 volts”相关问题
  • 第1题:

    Which of the following voltages can be measured from a Molex connector on the power supply?()

    A. 1.5 volts

    B. 3 volts

    C. 5 volts

    D. 12 volts

    E. 115 volts


    参考答案:C, D

  • 第2题:

    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()

    A. There is a fire hazard potential if a power outage occurs.

    B. The last system plugged into the UPS will not be provided any power.

    C. The UPS will draw more power from the circuit to compensate.

    D. The runtime of the UPS will be insufficient if a power outage occurs.


    参考答案:D

  • 第3题:

    A technician receives a computer for repair and observes that the fan on the power supply is not moving. Which of the following should the technician do? ()

    • A、Move the power supply voltage switch to 220 volts.
    • B、Add an additional fan to help cool the computer.
    • C、Replace the cable that attaches the power supply to the motherboard.
    • D、Replace the power supply.

    正确答案:D

  • 第4题:

    Which of the following tools is BEST used to measure voltage and amperage from a power source?()

    • A、Loopback Plug
    • B、Multimeter
    • C、Power Supply Tester
    • D、Extension Magnet

    正确答案:B

  • 第5题:

    Which of the following will allow Karen, a technician, to determine if the correct voltages are reaching the computer components? (Select TWO).()

    • A、Power supply tester
    • B、Cable tester
    • C、Loopback plugs
    • D、Multimeter
    • E、Butt set

    正确答案:A,D

  • 第6题:

    A server has been intermittently shutting off. The power going to the server was tested and is giving the appropriate voltages. Which of the following tools would be used to test the power supply?()

    • A、 POST diagnostic card
    • B、 OTDR
    • C、 TDR
    • D、 Multimeter

    正确答案:D

  • 第7题:

    Which of the following voltages can be measured from a Molex connector on the power supply?()

    • A、1.5 volts
    • B、3 volts
    • C、5 volts
    • D、12 volts
    • E、115 volts

    正确答案:C,D

  • 第8题:

    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?()

    • A、6-pin PCI connector
    • B、24-pin connector
    • C、Molex connector
    • D、SATA connector

    正确答案:B

  • 第9题:

    多选题
    Which of the following voltages can be measured from a Molex connector on the power supply?()
    A

    1.5 volts

    B

    3 volts

    C

    5 volts

    D

    12 volts

    E

    115 volts


    正确答案: C,B
    解析: 暂无解析

  • 第10题:

    单选题
    Which of the following tools is BEST used to measure voltage and amperage from a power source?()
    A

    Loopback Plug

    B

    Multimeter

    C

    Power Supply Tester

    D

    Extension Magnet


    正确答案: C
    解析: 暂无解析

  • 第11题:

    多选题
    Which of the following is the voltage that an ATX molex connector delivers to an IDE device? ()
    A

    -3.3 Volts

    B

    24 Volts

    C

    120 Volts

    D

    12 Volts

    E

    5 Volts


    正确答案: B,E
    解析: 暂无解析

  • 第12题:

    单选题
    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()
    A

    There is a fire hazard potential if a power outage occurs.

    B

    The last system plugged into the UPS will not be provided any power.

    C

    The UPS will draw more power from the circuit to compensate.

    D

    The runtime of the UPS will be insufficient if a power outage occurs.


    正确答案: D
    解析: 暂无解析

  • 第13题:

    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?()

    A. 6-pin PCI connector

    B. 24-pin connector

    C. Molex connector

    D. SATA connector


    参考答案:B

  • 第14题:

    Which of the following is the voltage that an ATX molex connector delivers to an IDE device? ()

    • A、-3.3 Volts
    • B、24 Volts
    • C、120 Volts
    • D、12 Volts
    • E、5 Volts

    正确答案:D,E

  • 第15题:

    A technician is testing a power supply for correct output voltages at the HDD power connector. Which of the following voltages should the technician expect for a correctly working power supply?()

    • A、6V
    • B、9V
    • C、12V
    • D、24V

    正确答案:C

  • 第16题:

    A military member has just returned to the United States from Europe and reports their personaldesktop computer does not work. Which of the following is the MOST logical solution to thisproblem?()

    • A、The computer is unable to work in the US because of EU licensing arrangements
    • B、The power supply needs to be replaced with one rated for 110 watts
    • C、The power supply needs a power inverter to handle the change in cycles
    • D、The power supply voltage needs to be switched to 110 from 220

    正确答案:D

  • 第17题:

    How many volts does a power supply’s 4-pin Molex connector carry to internal devices?()

    • A、2.5 volts
    • B、5 volts
    • C、6 volts
    • D、15 volts

    正确答案:B

  • 第18题:

    Which of the following connectors uses the main board ATX connector type?()

    • A、Centronix
    • B、20/24 pin
    • C、BNC
    • D、Molex

    正确答案:B

  • 第19题:

    A technician is installing a new power supply into a computer. One of the power supply connectors that the technician needs to connect to the motherboard is square and contains 4-pins. This connector is known as which of the following?()

    • A、SATA
    • B、FDD
    • C、IDE
    • D、ATX

    正确答案:D

  • 第20题:

    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()

    • A、 There is a fire hazard potential if a power outage occurs.
    • B、 The last system plugged into the UPS will not be provided any power.
    • C、 The UPS will draw more power from the circuit to compensate.
    • D、 The runtime of the UPS will be insufficient if a power outage occurs.

    正确答案:D

  • 第21题:

    多选题
    Which of the following will allow Karen, a technician, to determine if the correct voltages are reaching the computer components? (Select TWO).()
    A

    Power supply tester

    B

    Cable tester

    C

    Loopback plugs

    D

    Multimeter

    E

    Butt set


    正确答案: C,D
    解析: 暂无解析

  • 第22题:

    单选题
    A server has been intermittently shutting off. The power going to the server was tested and is giving the appropriate voltages. Which of the following tools would be used to test the power supply?()
    A

     POST diagnostic card

    B

     OTDR

    C

     TDR

    D

     Multimeter


    正确答案: A
    解析: 暂无解析

  • 第23题:

    单选题
    How many volts does a power supply’s 4-pin Molex connector carry to internal devices?()
    A

    2.5 volts

    B

    5 volts

    C

    6 volts

    D

    15 volts


    正确答案: D
    解析: 暂无解析

  • 第24题:

    单选题
    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?()
    A

    6-pin PCI connector

    B

    24-pin connector

    C

    Molex connector

    D

    SATA connector


    正确答案: D
    解析: 暂无解析