单选题Which of the following should a technician do FIRST in the BIOS to set up drive encryption?（）A Enable eSATA supportB Run built-in diagnosticsC Enable TPMD Enable virtualization support

第1题：

第2题：

Which of the following settings will reduce packet overhead and overall latency in a standalonepoint-to-point bridge deployment？（）

• A、enable concatenation on the non-root bridge only
• B、enable concatenation on the root bridge only
• C、enable concatenation on both the root bridge and non-root bridge
• D、enable concatenation on the root bridge and set it as desirable on the non-root bridge
• E、set concatenation as desirable on the root bridge and enable it on the non-root bridge

第3题：

A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?（）

• A、Reboot the computer
• B、Remove the drive and reinstall
• C、Install the device driver
• D、Flash the BIOS

第4题：

You set up scheduled tasks to run and notify you of any failures. 3 days later you see that none of the tasks ran and you received no notifications. What should you do？（）

• A、Set the schedule service to run under the administrator account.
• B、Set the scheduled tasks to run under the administrator account.
• C、Enable the messenger service
• D、Set the schedule service to run under the local system account and set it to start automatically.

第5题：

Which of the following should a technician do FIRST in the BIOS to set up drive encryption?（）

• A、Enable eSATA support
• B、Run built-in diagnostics
• C、Enable TPM
• D、Enable virtualization support

第6题：

A PC administrator is trying to implement BitLocker full disk encryption but the PC reports that asecurity module is not found. Which of the following should the administrator do to correct this?（）

• A、Enable the BIOS password
• B、Turn UAC off
• C、Create a separate partition with EFS
• D、Enable TPM in the BIOS

第7题：

A technician wants to secure a Windows 7 Ultimate notebook hard drive. Which of the following should the technician do to implement BitLocker?（） (Select TWO).

• A、Disable TPM in the system BIOS
• B、Run the BitLocker wizard and any necessary partitions
• C、Enable TPM in the system BIOS
• D、Enable TPM in the Windows 7 OS files
• E、Set up the OS and the system files on the same partition

第8题：

A technician is preparing to update the BIOS on a laptop. Which of the following should thetechnician do to prevent problems during the update?（）

• A、Remove all of the memory
• B、Plug in the AC adapter
• C、Remove the hard drive and optical drive
• D、Clear the partitions on the hard drive

第9题：

Which of the following would you use to enable automatic media recovery for a database？（）

• A、SET AUTORECOVERY ON
• B、SET RECOVERY ON
• C、SET AUTO ON
• D、You cannot enable automatic media recovery.

第10题：

第11题：

第12题：

第13题：

Which of the following should be used to restrict access to a wireless network?（）

• A、Port forwarding
• B、Enable SSID broadcast
• C、Wireless encryption
• D、Enable DMZ

第14题：

Which of the following would be the BEST way for Mike, a technician, to disallow other clients to access a WAP, if only the same clients will always be accessing it?（）

• A、Disable SSID broadcast
• B、Enable MAC filtering
• C、Disable DHCP server
• D、Enable WEP encryption

第15题：

Which of the following should be implemented to allow a user to securely connect to a network driveremotely?（）

• A、Enable file and print share
• B、FTP
• C、VPN
• D、Map a drive

第16题：

A support specialist started to apply an APAR on a system by inserting the tape into the tape drive， and loaded the fix using smitty installp. The following error message is displayed： tape not in backup format   Which of the following will resolve this problem？（）

• A、Change density setting to 2
• B、Set tape device to /dev/rmt0
• C、Set block size to 0 for variable
• D、Enable compression on tape device

第17题：

A technician would like to load an operating system CD on startup. Which of the following settings would a technician change in the BIOS?（）

• A、Enable TPM
• B、Enable BIOS password
• C、Disable TPM
• D、Boot sequence

第18题：

When connecting a laser printer to a network for the first time， a technician should FIRST：（）

• A、configure the network settings on the printer.
• B、ensure the cable is set to TCP/IP.
• C、enable the printer in the BIOS.
• D、configure the printer as bi-directional in Windows.

第19题：

A user reports that their hard drive has failed and needs to be replaced. Which of the following should the technician do FIRST?（）

• A、Run the hard disk manufacturer’s diagnostic program
• B、Re-image the drive
• C、Replace the hard drive and load Windows
• D、Ask the user diagnostic questions

第20题：

When installing a wireless access point, which of the following should the technician perform FIRST?（）

• A、Enable MAC filtering.
• B、Download and install the latest firmware.
• C、Disable DHCP.
• D、Change the default password.

第21题：

You need to design a method to enable remote encryption on Server5. What should you do？（）

• A、Configure the editor’s user account properties to enable Store password using reversible encryption
• B、Configure the editor’s user account properties to enable Use DES encryption for this account
• C、Configure the Local Security Policy on Server to enable the System cryptography： Use FIPS compliant algorithms for encryption， hashing， and signing security policy
• D、Configure the Server5 computer account properties to enable Trust computer for delegation

第22题：

第23题：

第24题：