单选题Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers？（）A 0B 1

题目
单选题
Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers？（）
A

0

B

1

C

2

D

3

相似考题

1.Routers A and B are connected with a point-to-point OC-3 interface. Each router‘s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in the same area.How many IS-IS adjacencies exist between the two routers?（）A.0B.1C.2D.3

2.Two Level 2 routers are exchanging Hello packets with different Area IDs.What occurs between these routers?()A. An Adjacency is formed.B. No IS-IS PDUs are sent.C. An Adjacency does not form.D. An Adjacency forms but traffic is not forwarded.

3.Routers A and B are connected with a point-to-point OC-3 interface. Each routers OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas. How many IS-IS adjacencies exist between the two routers?（）A.0B.1C.2D.3

4.Two Level 1 routers are exchanging Hello packets with different Area IDs.What occurs between these routers?()A. An Adjacency is formed.B. No IS-IS PDUs are sentC. An Adjacency does not form.D. An Adjacency forms but traffic is not forwarded.

更多“单选题Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers？（）A 0B 1”相关问题

  • 第1题：

    Which two statements are correct regarding IS－IS?()

    A. Routers maintain a single link-state database per area.

    B. Routers maintain a separate Level 1 link-state database.

    C. Routers maintain a separate Level 2 link-state database.

    D. Routers maintain a single Level 1 link-state database across multiple areas.


    参考答案：B, C

  • 第2题：

    The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely caust of the problem?()

    A.Authentication needs to be changed to PAP for both routers.

    B.Serial IP addresses of routers are not on the same subnet.

    C.Username/password is incorrectly configured.

    D.Router names are incorrectly configured.


    参考答案：C

  • 第3题：

    The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely caust of the problem?（）

    • A、Authentication needs to be changed to PAP for both routers.
    • B、Serial IP addresses of routers are not on the same subnet.
    • C、Username/password is incorrectly configured.
    • D、Router names are incorrectly configured.

    正确答案:C

  • 第4题：

    Routers A and B are connected with a point-to-point OC-3 interface. Each router's OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in the same area. How many IS-IS adjacencies exist between the two routers?（）

    • A、0
    • B、1
    • C、2
    • D、3

    正确答案:C

  • 第5题：

    Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）

    • A、Attempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transport data.
    • B、Ping from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP to transport packets.
    • C、There is no way to make BGP work across a firewall without special configuration， so there is no simple test that will show you if BGP will work or not， other than trying to start the peering session.
    • D、There is no way to make BGP work across a firewall.

    正确答案:A

  • 第6题：

    Which two statements are correct regarding IS-IS？（）

    • A、Routers maintain a single link-state database per area.
    • B、Routers maintain a separate Level 1 link-state database.
    • C、Routers maintain a separate Level 2 link-state database.
    • D、Routers maintain a single Level 1 link-state database per area.

    正确答案:B,C

  • 第7题：

    Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers？（）

    • A、0
    • B、1
    • C、2
    • D、3

    正确答案:B

  • 第8题：

    Which two statements are true by default of a multilevel IS-IS network?（）

    • A、Level 1 only routers see routes contained in their area.
    • B、Level 1 routers route towards Level 2 routers due to the attached bit.
    • C、Level 2 routers route towards Level 1 routers due to the attached bit.
    • D、Level 2 routers can see routes in other Level 2 areas and routes originated in Level 1 areas.

    正确答案:A,D

  • 第9题：

    多选题
    Routers R1 and R2 use HSRP so that one router will back up the other should there be a failure.   Which two statements are true about the Hot Standby Router Protocol （HSRP）？ （）
    A

    Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers.

    B

    Routers configured for HSRP can belong to multiple groups and multiple VLANs.

    C

    Load sharing with HSRP is achieved by creating HSRP groups on the HSRP routers.

    D

    All routers configured for HSRP load balancing must be configured with the same priority.

    E

    Routers configured for HSRP must belong to only one group per HSRP interface.


    正确答案： D,C
    解析： 暂无解析

  • 第10题：

    单选题
    Two Level 1 routers are exchanging Hello packets with different Area IDs.What occurs between these routers?（）
    A

    An Adjacency is formed.

    B

    No IS-IS PDUs are sent

    C

    An Adjacency does not form.

    D

    An Adjacency forms but traffic is not forwarded.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements are true by default of a multilevel IS-IS network?（）
    A

    Level 1 only routers see routes contained in their area.

    B

    Level 1 routers route towards Level 2 routers due to the attached bit.

    C

    Level 2 routers route towards Level 1 routers due to the attached bit.

    D

    Level 2 routers can see routes in other Level 2 areas and routes originated in Level 1 areas.


    正确答案： A,C
    解析： 暂无解析

  • 第12题：

    单选题
    Routers A and B are connected with a point-to-point OC-3 interface. Each router's OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in the same area. How many IS-IS adjacencies exist between the two routers?（）
    A

    0

    B

    1

    C

    2

    D

    3


    正确答案： C
    解析： 暂无解析

  • 第13题：

    The relevant configuration files for the TestKing1 and TestKing2 routers are displayed below:With due consideration to the command outputs, which of the following reasons would you attribute the connectivity problem between the two routers?（）

    A. The authentication needs to be changed to PAP for both routers.

    B. The serial IP addresses of routers are not on the same subnet.

    C. The username/password combination is incorrectly configured.

    D. The router names are incorrectly configured.


    参考答案：C

  • 第14题：

    Routers R1 and R2 use HSRP so that one router will back up the other should there be a failure.   Which two statements are true about the Hot Standby Router Protocol （HSRP）？ （）

    • A、 Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers.  
    • B、 Routers configured for HSRP can belong to multiple groups and multiple VLANs.
    • C、 Load sharing with HSRP is achieved by creating HSRP groups on the HSRP routers.
    • D、 All routers configured for HSRP load balancing must be configured with the same priority.  
    • E、 Routers configured for HSRP must belong to only one group per HSRP interface.

    正确答案:B,C

  • 第15题：

    Two Level 1 routers are exchanging Hello packets with different Area IDs.What occurs between these routers?（）

    • A、An Adjacency is formed.
    • B、No IS-IS PDUs are sent
    • C、An Adjacency does not form.
    • D、An Adjacency forms but traffic is not forwarded.

    正确答案:C

  • 第16题：

    Routers A and B are connected with a point-to-point OC-3 interface. Each routers OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas. How many IS-IS adjacencies exist between the two routers?（）

    • A、0
    • B、1
    • C、2
    • D、3

    正确答案:B

  • 第17题：

    Two routers configured to run BGP have been connected to a firewall，one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer，including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）

    • A、Attempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall.If telnet works，BGP will work，since telnet and BGP both use TCP to transport data
    • B、Ping from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall.If you can ping between them，BGP should work，since BGP uses IP to transport packets
    • C、There is no way to make BGP work across a firewall without special configuration，so there is no simple test that will show you if BGP will work or not，other than trying to start the peering session
    • D、There is no way to make BGP work across a firewall

    正确答案:A

  • 第18题：

    There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is: Router A: 10.1.1.1/24 Router B: 10.1.1.2/24 Router C: 10.2.2.1/26 Which statement is true about all the adjacencies that exist on that LAN?（）

    • A、No routers are adjacent with each other.
    • B、Only Router A and Router B are adjacent at Level 1.
    • C、Only Router A and Router B are adjacent at Level 2.
    • D、All three routers are adjacent with each other at Level 1.

    正确答案:B

  • 第19题：

    Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these routers?（）

    • A、An Adjacency forms.
    • B、An Adjacency does not form.
    • C、An Adjacency forms but traffic is not forwarded.
    • D、No IS-IS PDUs are sent.

    正确答案:A

  • 第20题：

    单选题
    Routers A and B are connected with a point-to-point OC-3 interface. Each routers OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas. How many IS-IS adjacencies exist between the two routers?（）
    A

    0

    B

    1

    C

    2

    D

    3


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is: Router A: 10.1.1.1/24 Router B: 10.1.1.2/24 Router C: 10.2.2.1/26 Which statement is true about all the adjacencies that exist on that LAN?（）
    A

    No routers are adjacent with each other.

    B

    Only Router A and Router B are adjacent at Level 1.

    C

    Only Router A and Router B are adjacent at Level 2.

    D

    All three routers are adjacent with each other at Level 1.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Two routers configured to run BGP have been connected to a firewall，one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer，including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）
    A

    Attempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall.If telnet works，BGP will work，since telnet and BGP both use TCP to transport data

    B

    Ping from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall.If you can ping between them，BGP should work，since BGP uses IP to transport packets

    C

    There is no way to make BGP work across a firewall without special configuration，so there is no simple test that will show you if BGP will work or not，other than trying to start the peering session

    D

    There is no way to make BGP work across a firewall


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely caust of the problem?（）
    A

    Authentication needs to be changed to PAP for both routers.

    B

    Serial IP addresses of routers are not on the same subnet.

    C

    Username/password is incorrectly configured.

    D

    Router names are incorrectly configured.


    正确答案： B
    解析： 暂无解析

相关内容