单选题Which of the following adapters should be connected to coaxial cabling without the use of media converters？（）A Adapter with AUI connectorB Adapter with BNC connectorC Adapter with RJ-45 connectorD Adapter with DB-25 connector

题目
单选题
Which of the following adapters should be connected to coaxial cabling without the use of media converters？（）
A

Adapter with AUI connector

B

Adapter with BNC connector

C

Adapter with RJ-45 connector

D

Adapter with DB-25 connector

相似考题

1.Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only whe nyou are traveling. You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home.Which two actions should you perform?（）A.AB.BC.CD.D

2.Which of the following is a characteristic of a serial I/O port?（）A、RJ-11 connectorB、DB-15 connectorC、DB-9 connectorD、RJ-45 connector

3.A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）A、Upgrade the network switches to 10Gb speed.B、Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.C、Install one extra adapter to team with the internal adapter and configure adapter failover.D、Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.

4.光纤适配器上使用什么接口？（）A、SC connectorB、LCorSC connectorC、RJ-45 connectorD、LC connector

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题Which of the following adapters should be connected to coaxial cabling without the use of media converters？（）A Adapter with AUI connectorB Adapter with BNC connectorC Adapter with RJ-45 connectorD Adapter with DB-25 connector”相关问题

  • 第1题：

    Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0.  What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure？（）  

    • A、 One adapter per node
    • B、 Two adapters per node
    • C、 Four adapters per node
    • D、 No additional adapters per node

    正确答案:B

  • 第2题：

    Which of the following options applies to virtual Ethernet devices（）

    • A、A virtual Ethernet adapter can only connect to other partitions within the same system.
    • B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.
    • C、A partition can support an unlimited number of virtual Ethernet devices.
    • D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

    正确答案:A

  • 第3题：

    Which of the following would represent a power supply connector that supplies the main power toan ATX motherboard?（）

    • A、6-pin PCI connector
    • B、24-pin connector
    • C、Molex connector
    • D、SATA connector

    正确答案:B

  • 第4题：

    A pSeries technical specialist is configuring the network adapters for an HACMP cluster.  The plan is to use a four-port Ethernet adapter with IPAT via IP aliasing for the two service IP labels.  Which of the following would be a critical concern with the proposed configuration？（）

    • A、A four-port adapter is not supported.
    • B、The four-port adapter is a single point of failure.
    • C、There should be a spare port for each service IP label.
    • D、The four-port adapter could be a potential performance bottleneck.

    正确答案:B

  • 第5题：

    Which of the following adapters should be connected to coaxial cabling without the use of media converters？（）

    • A、Adapter with AUI connector
    • B、Adapter with BNC connector
    • C、Adapter with RJ-45 connector
    • D、Adapter with DB-25 connector

    正确答案:B

  • 第6题：

    You have a Windows Server 2008 R2 Hyper-V server with two network adapters named Adapter1 and Adapter2.   You need to configure the server to host virtual machines （VMs） on different networks.  Which two actions should you perform on the host server？（）

    • A、Set Adapter1 as a management interface.
    • B、Configure Adapter1 to support jumbo frames.
    • C、Set Adapter2 in Trunk mode， and configure VM VLAN tags.
    • D、Disable TCP Chimney support on Adapter2， and configure VM VLAN tags.

    正确答案:A,C

  • 第7题：

    单选题
    A pSeries technical specialist is configuring the network adapters for an HACMP cluster.  The plan is to use a four-port Ethernet adapter with IPAT via IP aliasing for the two service IP labels.  Which of the following would be a critical concern with the proposed configuration？（）
    A

    A four-port adapter is not supported.

    B

    The four-port adapter is a single point of failure.

    C

    There should be a spare port for each service IP label.

    D

    The four-port adapter could be a potential performance bottleneck.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Which of the following options applies to virtual Ethernet devices（）
    A

    A virtual Ethernet adapter can only connect to other partitions within the same system.

    B

    A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.

    C

    A partition can support an unlimited number of virtual Ethernet devices.

    D

    A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the trunk flag set


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will enable the creation of the partitions with minimal intervention？（）
    A

    Install a VIO partition to share the tape drive.

    B

    Purchase three external SCSI adapters and physically move the tape drive when needed.

    C

    Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.

    D

    Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following allows the user to have two separate Ethernet networks share the same network adapter？（）
    A

    VLAN tags

    B

    EtherChannel

    C

    Virtual Ethernet

    D

    Shared Ethernet Adapter


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A customer has a failing HBA adapter and needs to identify the location of the adapter.  Which of the following AIX commands should the specialist recommend the customer review？（）
    A

    rmdev

    B

    chdev

    C

    drslot

    D

    cfgmgr


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    You are designing a Windows Server 2008 R2 Hyper-V virtualization environment. Your host servers must have the following elements：  A dedicated management network adapter.A dedicated virtual network for child iSCSI network traffic.A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing.  Which adapters should you choose？（）
    A

    three network adapters that support 802.1p

    B

    two network adapters that support 802.1q， and one iSCSI host bus adapter

    C

    two network adapters that support 802.1p， and one network adapter that supports TCP Chimney

    D

    two network adapters that support 802.1q， and one network adapter that supports Jumbo frames


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will enable the creation of the partitions with minimal intervention？（）

    • A、Install a VIO partition to share the tape drive.
    • B、Purchase three external SCSI adapters and physically move the tape drive when needed.
    • C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.
    • D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.

    正确答案:C

  • 第14题：

    光纤适配器上使用什么接口？（）

    • A、SC connector
    • B、LC or SC connector
    • C、RJ-45 connector
    • D、LC connector

    正确答案:B

  • 第15题：

    A customer has a failing HBA adapter and needs to identify the location of the adapter.  Which of the following AIX commands should the specialist recommend the customer review？（）

    • A、rmdev
    • B、chdev
    • C、drslot
    • D、cfgmgr

    正确答案:C

  • 第16题：

    Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）

    • A、Assign the adapter to an IO Hosting partition
    • B、Use AIX 5L affinity to move the application from SUSE to AIX
    • C、Use AIX 5.3 drivers to install the adapter in the Linux LPAR
    • D、Assign the adapter to an AIX 5.3 partition running Linux Affinity

    正确答案:A

  • 第17题：

    A server has two PCI-X buses with four Active PCI-X slots.  Slots 1 and 2 are on the first PCI-X bus （100MHz） and slots 3 and 4 are on the second PCI-X bus （133MHz）. The customer requires you to install adapter A and adapter B on day one.  After the server has been installed and configured， the server must  be running 24 by 7 with no downtime. Three months later， adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz.  The customer’s priority is to have no downtime， and performance is secondary.   Based on the information provided， into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added？（）

    • A、Adapter A in slot 1， adapter B in slot 4 and hot-add adapter C in slot 3
    • B、Adapter A in slot 1， adapter B in slot 3 and hot-add adapter C in slot 2
    • C、Adapter A in slot 2， adapter B in slot 4 and hot-add adapter C in slot 3
    • D、Adapter A in slot 3， adapter B in slot 1 and hot-add adapter C in slot 4

    正确答案:B

  • 第18题：

    You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 & 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other.   What should you do?（）

    • A、Configure the 10/100 switch to transfer only at the 100 MBPS rate.
    • B、Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.
    • C、Change the combination network adapter card to use the BNC transceiver setting.
    • D、Change the combination network adapter card to use the UTP transceiver setting.

    正确答案:D

  • 第19题：

    单选题
    Which of the following adapters should be connected to coaxial cabling without the use of media converters？（）
    A

    Adapter with AUI connector

    B

    Adapter with BNC connector

    C

    Adapter with RJ-45 connector

    D

    Adapter with DB-25 connector


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Node ’A’ and ’B’ have two network adapters connected to different networks. Adapter 1 is assigned the address 192.168.0.10 with a subnet mask of 255.255.255.0. Adapter 2 is assigned the address 24.76.1.200 with a subnet mask of 255.255.240.0.  What is the minimum number of additional adapters per node required to eliminate a network adapter as a single point of failure？（）
    A

     One adapter per node

    B

     Two adapters per node

    C

     Four adapters per node

    D

     No additional adapters per node


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 & 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other.   What should you do?（）
    A

    Configure the 10/100 switch to transfer only at the 100 MBPS rate.

    B

    Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.

    C

    Change the combination network adapter card to use the BNC transceiver setting.

    D

    Change the combination network adapter card to use the UTP transceiver setting.


    正确答案： D
    解析： In this scenario， the combination network adapter cards are set to use BNC connectors. We need to manually reconfigure the network adapters for UTP cabling

  • 第22题：

    单选题
    A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added.  High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）
    A

    Upgrade the network switches to 10Gb speed.

    B

    Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.

    C

    Install one extra adapter to team with the internal adapter and configure adapter failover.

    D

    Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A server has two PCI-X buses with four Active PCI-X slots.  Slots 1 and 2 are on the first PCI-X bus （100MHz） and slots 3 and 4 are on the second PCI-X bus （133MHz）. The customer requires you to install adapter A and adapter B on day one.  After the server has been installed and configured， the server must  be running 24 by 7 with no downtime. Three months later， adapter C needs to be hot added. All the adapters are 64-bit and capable of speeds up to 133MHz.  The customer’s priority is to have no downtime， and performance is secondary.   Based on the information provided， into which slots should adapters A and B be installed in and later into which slot would adapter C be hot-added？（）
    A

    Adapter A in slot 1， adapter B in slot 4 and hot-add adapter C in slot 3

    B

    Adapter A in slot 1， adapter B in slot 3 and hot-add adapter C in slot 2

    C

    Adapter A in slot 2， adapter B in slot 4 and hot-add adapter C in slot 3

    D

    Adapter A in slot 3， adapter B in slot 1 and hot-add adapter C in slot 4


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： C
    解析： 暂无解析

相关内容