多选题Which two statements are true regarding an Ethernet collision domain?（）AThe likelihood of collisions occurring increases when a switch is used.BThe likelihood of collisions occurring increases when a hub is used.CIf a hub is used, the collision domain

题目
多选题
Which two statements are true regarding an Ethernet collision domain?（）
A

The likelihood of collisions occurring increases when a switch is used.

B

The likelihood of collisions occurring increases when a hub is used.

C

If a hub is used, the collision domain is limited to each device and the hub.

D

If a switch is used, the collision domain is limited to each device and the switch.

相似考题

1.Which three statements are true about the operation of a full-duplex Ethernet network, which is being used in the Ezonexam LAN? (Choose three)A．Ethernet hub ports are preconfigured for full-duplex mode.B．The host network card and the switch port must be capable of operating in full-duplex mode.C．There are no collisions in full-duplex mode.D．In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.E．A dedicated switch port is required for each full-duplex node.

2.Which two statements describe the operation of the CSMA/CD access method, which is in use on the Ezonexam network? (Choose two)A. After a collision, the station that detected the collision has first priority to resend the lost data.B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.C. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.D. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method.E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.

3.Which of the following statements correctly describe the differences between half-duplex and full-duplex Ethernet? (Select two answer choices.)A．Full-duplex Ethernet uses CSMA/CD to prevent collisions.B．Half-duplex Ethernet uses a loopback circuit to detect collisions.C．A full-duplex Ethernet card allows 20Mbps for data transmission.D．Full-duplex Ethernet makes use of two pairs of wires for data.E．An Ethernet hub can operate both half and full duplex simultaneously.

4.When you compare the differences between half-duplex and full-duplex Ethernet, which of the following characteristics are exclusive to half-duplex? (Select two answer choices)A．Half-duplex Ethernet operates in a shared collision domain.B．Half-duplex Ethernet operates in an exclusive broadcast domain.C．Half-duplex Ethernet has efficient throughput.D．Half-duplex Ethernet has lower effective throughput.E．Half-duplex Ethernet operates in an exclusive collision domain.

更多“多选题Which two statements are true regarding an Ethernet collision domain?（）AThe likelihood of collisions occurring increases when a switch is used.BThe likelihood of collisions occurring increases when a hub is used.CIf a hub is used, the collision domain ”相关问题

  • 第1题：

    Which of the following a true statements regarding the use of VLANs to segment a network? (Select three)

    A. They increase the size of collision domains

    B. They allow logical grouping of users by function.

    C. They can enhance network security.

    D. They increase the size of the broadcast domain while decreasing the number of collision domains.

    E. They increase the number of broadcast domains while decreasing the size of the broadcast domains.

    F. They simplify switch administration.


    正确答案：BCE
    B,C,E 解析：Explanation:
    VLANs are used to segment a LAN into multiple, smaller LANs. This can be used to enhance security as local traffic from one VLAN will not be passed to users in other VLANS.

    Incorrect Answers:
    A. VLANs are used to decrease the size of a collision domain, not increase it.

    D. The opposite is true.

    F. The default operation of a switch is to allow all traffic and to enable all ports in VLAN1. The use of VLANs will increase the complexity of the switch environment, making for more difficult administration.

  • 第2题：

    Which statement is true regarding an Ethernet collision domain?（）

    • A、If a router is used, the collision domain includes all devices connected to the router.
    • B、If a hub is used, the collision domain is limited to each device and the hub.
    • C、If a switch is used, the collision domain is limited to each device and the switch.
    • D、If a bridge is used, the collision domain includes all devices connected to the bridge.

    正确答案:C

  • 第3题：

    Which of the following statements correctly describe the differences between half-duplex and full-duplex Ethernet?（）

    • A、Full-duplex Ethernet uses CSMA/CD to prevent collisions.
    • B、Half-duplex Ethernet uses a loopback circuit to detect collisions.
    • C、A full-duplex Ethernet card allows 20Mbps for data transmission.
    • D、Full-duplex Ethernet makes use of two pairs of wires for data.
    • E、An Ethernet hub can operate both half and full duplex simultaneously.

    正确答案:B,D

  • 第4题：

    When you compare the differences between half-duplex and full-duplex Ethernet,which of the following characteristics are exclusive to half-duplex?（）

    • A、Half-duplex Ethernet operates in a shared collision domain.
    • B、Half-duplex Ethernet operates in an exclusive broadcast domain.
    • C、Half-duplex Ethernet has efficient throughput.
    • D、Half-duplex Ethernet has lower effective throughput.
    • E、Half-duplex Ethernet operates in an exclusive collision domain.

    正确答案:A,D

  • 第5题：

    Which two statements are true regarding an Ethernet collision domain?（）

    • A、If a switch is used, the collision domain is limited to each device and the switch.
    • B、If a hub is used, the collision domain is limited to each device and the hub.
    • C、If a hub is used, the collision domain includes all devices connected to the hub.
    • D、If a switch is used, the collision domain includes all devices connected to the switch.

    正确答案:A,C

  • 第6题：

    Which statement is true regarding an Ethernet collision domain?（）

    • A、If a router is used, the collision domain includes all devices connected to the router
    • B、If a hub is used, the colision domain is limited to each device and the hub
    • C、If a switch is used, the collision domain is limited to each device and the switch
    • D、If a bridge is used, the collision domain includes all devices connected to the bridge

    正确答案:C

  • 第7题：

    多选题
    Which two statements are true when configuring a domain-id? （）
    A

    The default OSPF domain-id is 127.0.0.1.

    B

    In most cases, a domain-id must be configured.

    C

    In most cases, you do not need to configure a domain-id.

    D

    For a layer 3 VPN connecting multiple OSPF domains, configuring a domain-id can help control LSA translations.


    正确答案： C,D
    解析： 暂无解析

  • 第8题：

    多选题
    Which of the following statements correctly describe the differences between half-duplex and full-duplex Ethernet?（）
    A

    Full-duplex Ethernet uses CSMA/CD to prevent collisions.

    B

    Half-duplex Ethernet uses a loopback circuit to detect collisions.

    C

    A full-duplex Ethernet card allows 20Mbps for data transmission.

    D

    Full-duplex Ethernet makes use of two pairs of wires for data.

    E

    An Ethernet hub can operate both half and full duplex simultaneously.


    正确答案： D,E
    解析： 暂无解析

  • 第9题：

    多选题
    When comparing and contrasting the similarities and differences between bridges and switches, which of the following are valid statements?（）
    A

    Bridges are faster than switches because they have fewer ports.

    B

    A switch is a multiport bridge,

    C

    Bridges and switches learn MAC addresses by examining the source MAC address of each frame received.

    D

    A bridge will forward a broadcast but a switch will not.

    E

    Bridges and switches increase the size of a collision domain.

    F

    None of the above statements are true.


    正确答案： A,B
    解析： 暂无解析

  • 第10题：

    单选题
    Which statement is true regarding an Ethernet collision domain?（）
    A

    If a router is used, the collision domain includes all devices connected to the router

    B

    If a hub is used, the colision domain is limited to each device and the hub

    C

    If a switch is used, the collision domain is limited to each device and the switch

    D

    If a bridge is used, the collision domain includes all devices connected to the bridge


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    When you compare the differences between half-duplex and full-duplex Ethernet,which of the following characteristics are exclusive to half-duplex?（）
    A

    Half-duplex Ethernet operates in a shared collision domain.

    B

    Half-duplex Ethernet operates in an exclusive broadcast domain.

    C

    Half-duplex Ethernet has efficient throughput.

    D

    Half-duplex Ethernet has lower effective throughput.

    E

    Half-duplex Ethernet operates in an exclusive collision domain.


    正确答案： A,B
    解析： 暂无解析

  • 第12题：

    多选题
    Refer to the exhibit.What two results would occur if the hub were to be replaced with a switch that is configured with one Ethernet VLAN?（）
    A

    The number of collision domains would decrease.

    B

    The number of collision domains would increase.

    C

    The number of broadcast domains would remain the same.

    D

    The number of collision domains would remain the same.

    E

    The number of broadcast domains would increase.


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    Which of the following contribute to congestion on an Ethernet network?()

    A. Use of full duplex mode.

    B. Creation of new collision domain.

    C. Creation of new broadcast domain.

    D. Addition of hub to the network.

    E. Use of switches in the network.

    F. Amount of ARP or IPX SAP traffic.


    参考答案：D, F

  • 第14题：

    Which two statements are true regarding an Ethernet collision domain?（）

    • A、If a switch is used, the collision domain is limited to each device and the switch
    • B、If a hub is used, the collision domain is limited to each device and the hub
    • C、If a hub is used, the collision domain includes all devices connected to the hub
    • D、If a switch is used, the collision domain includes all devices connected to the switch

    正确答案:A,C

  • 第15题：

    When comparing and contrasting the similarities and differences between bridges and switches, which of the following are valid statements?（）

    • A、Bridges are faster than switches because they have fewer ports.
    • B、A switch is a multiport bridge,
    • C、Bridges and switches learn MAC addresses by examining the source MAC address of each frame received.
    • D、A bridge will forward a broadcast but a switch will not.
    • E、Bridges and switches increase the size of a collision domain.
    • F、None of the above statements are true.

    正确答案:B,C

  • 第16题：

    Which of the following a true statements regarding the use of VLANs to segment anetwork? （）

    • A、They increase the size of collision domains
    • B、They allow logical grouping of users by function.
    • C、They can enhance network security.
    • D、They increase the size of the broadcast domain while decreasing the number of collision domains.
    • E、They increase the number of broadcast domains while decreasing the size of the broadcast domains.
    • F、They simplify switch administration.

    正确答案:B,C,E

  • 第17题：

    Which two statements are true regarding an Ethernet collision domain?（）

    • A、The likelihood of collisions occurring increases when a switch is used.
    • B、The likelihood of collisions occurring increases when a hub is used.
    • C、If a hub is used, the collision domain is limited to each device and the hub.
    • D、If a switch is used, the collision domain is limited to each device and the switch.

    正确答案:B,D

  • 第18题：

    多选题
    Which of the following a true statements regarding the use of VLANs to segment anetwork? （）
    A

    They increase the size of collision domains

    B

    They allow logical grouping of users by function.

    C

    They can enhance network security.

    D

    They increase the size of the broadcast domain while decreasing the number of collision domains.

    E

    They increase the number of broadcast domains while decreasing the size of the broadcast domains.

    F

    They simplify switch administration.


    正确答案： D,B
    解析： 暂无解析

  • 第19题：

    多选题
    Which two statements are true regarding an Ethernet collision domain?（）
    A

    If a switch is used, the collision domain is limited to each device and the switch.

    B

    If a hub is used, the collision domain is limited to each device and the hub.

    C

    If a hub is used, the collision domain includes all devices connected to the hub.

    D

    If a switch is used, the collision domain includes all devices connected to the switch.


    正确答案： A,C
    解析： 暂无解析

  • 第20题：

    多选题
    Which of the following contribute to congestion on an Ethernet network?（）
    A

    Use of full duplex mode.

    B

    Creation of new collision domain.

    C

    Creation of new broadcast domain.

    D

    Addition of hub to the network.

    E

    Use of switches in the network.

    F

    Amount of ARP or IPX SAP traffic.


    正确答案： B,A
    解析： 暂无解析

  • 第21题：

    多选题
    Which two statements are true regarding an Ethernet collision domain?（）
    A

    If a switch is used, the collision domain is limited to each device and the switch

    B

    If a hub is used, the collision domain is limited to each device and the hub

    C

    If a hub is used, the collision domain includes all devices connected to the hub

    D

    If a switch is used, the collision domain includes all devices connected to the switch


    正确答案： D,C
    解析： 暂无解析

  • 第22题：

    多选题
    What are the differences between full-duplex Ethernet and half-duplex Ethernet?（）
    A

    Half-duplex Ethernet operates in a shared collision domain.

    B

    Full-duplex Ethernet has a lower effective throughput.

    C

    Half-duplex Ethernet operates in a private collision domain.

    D

    Full-duplex Ethernet allows two-way communication.

    E

    Half-duplex Ethernet operates in a private broadcast domain.


    正确答案： D,E
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement is true regarding an Ethernet collision domain?（）
    A

    If a router is used, the collision domain includes all devices connected to the router.

    B

    If a hub is used, the collision domain is limited to each device and the hub.

    C

    If a switch is used, the collision domain is limited to each device and the switch.

    D

    If a bridge is used, the collision domain includes all devices connected to the bridge.


    正确答案： B
    解析： 暂无解析

相关内容