单选题Defining an HACMP cluster using the Initialization and Standard Configuration menu is limited to the use of：（）AIPAT via IP aliasingBCustom Resource GroupsCHeartbeating over IP AliasesDConcurrent Capable Volume Groups

题目
单选题
Defining an HACMP cluster using the Initialization and Standard Configuration menu is limited to the use of：（）
A

 IPAT via IP aliasing

B

 Custom Resource Groups

C

 Heartbeating over IP Aliases

D

 Concurrent Capable Volume Groups

相似考题

1. An HACMP cluster is planned for two logical partitions on IBM p690 servers. Both partitions have  three network interface adapters： two service adapters on a production network connected to an IP switch， and an administration adapter on a stand-alone hub that is connected to the p690 server’s HMC. Non-IP hearbeat paths cannot be configured due to the available hardware in the p690 servers.  Given the resources available，what is the best configuration for this cluster？（）A、 Add hardware to provide either serial heartbeats or shared disk heartbeats.B、 Define the administration network so HACMP will send heartb4eats over the non-routed network.C、 Add the administration network adapters to the production resource groups with IPAT via IP replacement selections.D、 Configure the IP Network Interface Module in HACMP with an increased heartbeat detection rate to prevent node isolation confutations.

2.A cluster using IPAT via IP aliasing has four adapters. Normally there are several resource  groups that have a total of four service IP labels. When two of the adapters fail， what happens？（）  A、 The resource group containing the IP labels changes to an "offline" state.B、 The IP service labels of the failed adapters relocate the surviving adapters.C、 Nothing because the resource groups wait for the adapters to become active again.D、 The resource groups containing the IP labels of the failed adapters migrate to a backup node.

3. During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned  as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable.  To facilitate disk heartbeating，how many disks per node and how many networks will be required？（）  A、 One disk per node，one networkB、 Two disks per node，one networkC、 Two disks per node，six networksD、 Two disks per node，three networks

4. Company.com is planning for an HACMP cluster and wants to know more about the network requirements. The plan is to use IPAT via IP aliasing and heartbeating via IP aliasing to preserve the corporate IP addresses. Currently the customer uses a separate VLAN for each individual subnet.  Which statement best describes how HACMP co-exists with VLAN’s in this configuration？（）   A、 All subnets in use by HACMP must be in the same VLAN.B、 All subnets in sue by HACMP must be in a different VLAN.C、 HACMP does not support multiple subnets when using heartbeating via IP aliasing.D、 HACMP does not support the use of VLAN.

更多“单选题Defining an HACMP cluster using the Initialization and Standard Configuration menu is limited to the use of：（）A  IPAT via IP aliasingB  Custom Resource GroupsC  Heartbeating over IP AliasesD  Concurrent Capable Volume Groups”相关问题

  • 第1题：

    During Company.com planning session， the network administrator discusses the requirements of having a persistent MAC address associated with the IP Service address.  How can this be accomplished using HACMP？（）  

    • A、 Enable routed to handle dynamic route creation.
    • B、 Use IPAT via IP aliasing and define the required MAC address.
    • C、 Add the Service IP Label to the /etc/cluster/ping_client_list.
    • D、 Use IPAT via IP replacement and define the required MAC address.

    正确答案:D

  • 第2题：

    Defining an HACMP cluster using the Initialization and Standard Configuration menu is limited to the use of：（）  

    • A、 IPAT via IP aliasing
    • B、 Custom Resource Groups
    • C、 Heartbeating over IP Aliases
    • D、 Concurrent Capable Volume Groups

    正确答案:A

  • 第3题：

    One service IP label and one volume group are assigned to a resource group in a cluster. An  Additional service IP label and volume group need to be added to the resource group.  How can this be done with the minimum disruption of the cluster？（）  

    • A、 Make the changes in HACMP and synchronize the cluster.
    • B、 It cannot， because changes like this cannot be made while the cluster is running.
    • C、 Make the changes in HACMP and wait until the next failure for the changes to take affect.
    • D、 Use the forced option to stop the cluster，make the changes，and restart cluster services.

    正确答案:A

  • 第4题：

    Company.com is considering converting from IPAT via replacement to IPAT via IP aliasing. What condition of IPAT via IP aliasing must be taken into consideration？（）

    • A、 The clients must support gratuitous ARP.
    • B、 The network type must support gratuitous ARP.
    • C、 Additional TCP/IP interfaces must be allocated for backup in case of failure.
    • D、 Using IPAT via IP aliasing will reduce the number of rotating resource groups that can be used.

    正确答案:B

  • 第5题：

    During Company.com planning session， the discussion focuses on how the IP connections are  Managed after a cluster node failure. This is critical for the business since their production application is a Lotus Domino solution requiring multiple IP addresses and recovery time is critical.  What type of IPAT implementation would best address these requirements？（）  

    • A、 IPAT via IP aliasing
    • B、 IPAT via IP replacement
    • C、 IPAT via IP aliasing using HWAT
    • D、 IPAT via IP replacement using HWAT

    正确答案:A

  • 第6题：

    单选题
    Continuous availability is required for an application in a two-node cluster. There is one rotating resource group in the cluster， and the nodes are identical machines. Client telnet connections to the application cannot be broken because it takes 20 to 30 minutes to recycle the client workstations and transactions will be lost.  What configuration best provides continuous connectivity to the application？（）
    A

     IPAT using IP Replacement without MAC address takeover.

    B

     IPAT using IP Aliasing and hardware MAC address takeover.

    C

     None because continuous telnet connectivity cannot be provided with HACMP.

    D

     Shared service IP address assigned to multiple network interface cards on each node.


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    One service IP label and one volume group are assigned to a resource group in a cluster. An  Additional service IP label and volume group need to be added to the resource group.  How can this be done with the minimum disruption of the cluster？（）
    A

     Make the changes in HACMP and synchronize the cluster.

    B

     It cannot， because changes like this cannot be made while the cluster is running.

    C

     Make the changes in HACMP and wait until the next failure for the changes to take affect.

    D

     Use the forced option to stop the cluster，make the changes，and restart cluster services.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Company.com is planning for an HACMP cluster and wants to know more about the network requirements. The plan is to use IPAT via IP aliasing and heartbeating via IP aliasing to preserve the corporate IP addresses. Currently the customer uses a separate VLAN for each individual subnet.  Which statement best describes how HACMP co-exists with VLAN’s in this configuration？（）
    A

     All subnets in use by HACMP must be in the same VLAN.

    B

     All subnets in sue by HACMP must be in a different VLAN.

    C

     HACMP does not support multiple subnets when using heartbeating via IP aliasing.

    D

     HACMP does not support the use of VLAN.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    During Company.com planning session， the discussion focuses on how the IP connections are  Managed after a cluster node failure. This is critical for the business since their production application is a Lotus Domino solution requiring multiple IP addresses and recovery time is critical.  What type of IPAT implementation would best address these requirements？（）
    A

     IPAT via IP aliasing

    B

     IPAT via IP replacement

    C

     IPAT via IP aliasing using HWAT

    D

     IPAT via IP replacement using HWAT


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    When defining resources for a concurrent resource group， which of the following is NOT  supported？（）
    A

     Application Servers using disk

    B

     Definition of Multiple IP aliases

    C

     Volume Groups using raw logical volumes

    D

     Volume Groups supporting concurrent access


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A cluster using IPAT via IP aliasing has four adapters. Normally there are several resource  groups that have a total of four service IP labels. When two of the adapters fail， what happens？（）
    A

     The resource group containing the IP labels changes to an offline state.

    B

     The IP service labels of the failed adapters relocate the surviving adapters.

    C

     Nothing because the resource groups wait for the adapters to become active again.

    D

     The resource groups containing the IP labels of the failed adapters migrate to a backup node.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Company.com environment consists of 10 volume groups and 4 physical networks. The customer  Desires the fastest possible fallover for a two-node cluster.  Which of the following configuration alternatives will provide the fastest fallover？（）
    A

     IPAT via IP Aliasing，default shared volume groups

    B

     IPAT via IP Replacement default shared volume groups

    C

     IPAT via IP Aliasing，enhanced concurrent volume groups

    D

     IPAT via IP Replacement，enhanced concurrent volume groups


    正确答案： D
    解析： 暂无解析

  • 第13题：

    When defining resources for a concurrent resource group， which of the following is NOT  supported？（）   

    • A、 Application Servers using disk
    • B、 Definition of Multiple IP aliases
    • C、 Volume Groups using raw logical volumes
    • D、 Volume Groups supporting concurrent access

    正确答案:B

  • 第14题：

    Following a successful migration，it is highly recommended that concurrent Volume Groups be Converted to enhanced concurrent capable Volume Groups.  In order to follow this recommendation，what step must be completed first？（）  

    • A、 The Volume Groups must be changed with chvg -E vgname.
    • B、 The Volume Groups must be a member of a resource group and must be varied on al nodes of       the cluster.
    • C、 The Volume Groups must be a member of a resource group and must be varied off all nodes      of the cluster.
    • D、 The Volume Grups cannot be changed to enhanced concurrent capable because they must be      recreated with mkvg -C vgname.

    正确答案:C

  • 第15题：

    Company.com environment consists of 10 volume groups and 4 physical networks. The customer  Desires the fastest possible fallover for a two-node cluster.  Which of the following configuration alternatives will provide the fastest fallover？（）  

    • A、 IPAT via IP Aliasing，default shared volume groups
    • B、 IPAT via IP Replacement default shared volume groups
    • C、 IPAT via IP Aliasing，enhanced concurrent volume groups
    • D、 IPAT via IP Replacement，enhanced concurrent volume groups

    正确答案:C

  • 第16题：

    The heartbeating over IP aliases function allows which of the following？（）

    • A、Create a heartbeat network over disks
    • B、Define all boot addresses as IP aliases
    • C、Define all IP addresses in the same network subnet
    • D、Define all boot， service and persistent addresses as IP aliases when using IPAT via replacement

    正确答案:C

  • 第17题：

    Company.com has I/O slot constraints on two nodes that are going to be configured in an  HACMP cluster. There is room for only one Network Interface Card in each node，in addition to the built-in Ethernet port on the system planer.  The best HACMP configuration for these servers is to implement：（）  

    • A、 A single adapter network using the Network Interface Card in each node
    • B、 A single adapter network using persistent addresses on the Network Interface Card in each node
    • C、 A dual adapter network using the internal Ethernet adapters as an non-service interface with IPAT via IP Replacement.
    • D、 EtherChannel high availability for the network connections with HACMP cascading resource groups for data and application fallover

    正确答案:C

  • 第18题：

    单选题
    During Company.com planning session， the network administrator discusses the requirements of having a persistent MAC address associated with the IP Service address.  How can this be accomplished using HACMP？（）
    A

     Enable routed to handle dynamic route creation.

    B

     Use IPAT via IP aliasing and define the required MAC address.

    C

     Add the Service IP Label to the /etc/cluster/ping_client_list.

    D

     Use IPAT via IP replacement and define the required MAC address.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Company.com is considering converting from IPAT via replacement to IPAT via IP aliasing. What condition of IPAT via IP aliasing must be taken into consideration？（）
    A

     The clients must support gratuitous ARP.

    B

     The network type must support gratuitous ARP.

    C

     Additional TCP/IP interfaces must be allocated for backup in case of failure.

    D

     Using IPAT via IP aliasing will reduce the number of rotating resource groups that can be used.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    The heartbeating over IP aliases function allows which of the following？（）
    A

    Create a heartbeat network over disks

    B

    Define all boot addresses as IP aliases

    C

    Define all IP addresses in the same network subnet

    D

    Define all boot， service and persistent addresses as IP aliases when using IPAT via replacement


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Following a successful migration，it is highly recommended that concurrent Volume Groups be Converted to enhanced concurrent capable Volume Groups.  In order to follow this recommendation，what step must be completed first？（）
    A

     The Volume Groups must be changed with chvg -E vgname.

    B

     The Volume Groups must be a member of a resource group and must be varied on al nodes of       the cluster.

    C

     The Volume Groups must be a member of a resource group and must be varied off all nodes      of the cluster.

    D

     The Volume Grups cannot be changed to enhanced concurrent capable because they must be      recreated with mkvg -C vgname.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    An HACMP cluster is planned for two logical partitions on IBM p690 servers. Both partitions have  three network interface adapters： two service adapters on a production network connected to an IP switch， and an administration adapter on a stand-alone hub that is connected to the p690 server’s HMC. Non-IP hearbeat paths cannot be configured due to the available hardware in the p690 servers.  Given the resources available，what is the best configuration for this cluster？（）
    A

     Add hardware to provide either serial heartbeats or shared disk heartbeats.

    B

     Define the administration network so HACMP will send heartb4eats over the non-routed network.

    C

     Add the administration network adapters to the production resource groups with IPAT via IP replacement selections.

    D

     Configure the IP Network Interface Module in HACMP with an increased heartbeat detection rate to prevent node isolation confutations.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Company.com has I/O slot constraints on two nodes that are going to be configured in an  HACMP cluster. There is room for only one Network Interface Card in each node，in addition to the built-in Ethernet port on the system planer.  The best HACMP configuration for these servers is to implement：（）
    A

     A single adapter network using the Network Interface Card in each node

    B

     A single adapter network using persistent addresses on the Network Interface Card in each node

    C

     A dual adapter network using the internal Ethernet adapters as an non-service interface with IPAT via IP Replacement.

    D

     EtherChannel high availability for the network connections with HACMP cascading resource groups for data and application fallover


    正确答案： B
    解析： 暂无解析

相关内容